Tesla just finished their Q2 earnings call, and CEO Elon Musk mentioned that the price of FSD Beta might be going up (again) by the end of this year.
Improved Framerate
FSD Beta has arguably gotten better over the years as Tesla has trained its neural nets and deprecated old ones. Musk stated that they will continue deleting older neural nets to improve the frame rate, which is currently 24fps. Removing the older neural nets will allegedly increase the frame rate up to 36fps.
This should allow for smoother interactions, especially when driving faster. Right now if you're driving 60 MPH, you're moving at a rate of 88 feet per second. If the car is interpreting 24fps, then it's analyzing its environment about every 3.6 feet.
Increasing the framerate to 36fps would lower this to about 2.4 feet, resulting in the vehicle having smoother reactions to its environment.
Musk explains this at the 27-minute mark in the Q2 earnings call.
FSD Beta Price Increase?
Musk has said that as it enhances its software feature set the price will continue to rise. They upped the price to $12,000 of FSD Beta earlier this year, up from $10,000, months before adding additional testers.
It’s difficult for some EV consumers to justify $12,000+ for non-physical features, which is why Tesla offers a subscription program for FSD. Musk didn’t clarify during the earnings call if the price of the subscription program would increase as well, but he did say that FSD is “currently ridiculously cheap.”
“The value of FSD is extremely high and not well understood by most people,” said Musk during the call. “It is basically currently ridiculously cheap, assuming FSD materializes, which it will.”
If Musk thinks FSD’s current price tag of $12,000 is ridiculously cheap, we can assume that FSD will most likely become quite more expensive over the next 5-10 years, especially as Tesla continues to collect more data from its fleet and add new features.
The EV automaker plans to push FSD Beta to all owners who purchased or subscribe in North America by the end of this year.
Many owners have requested that Tesla allow for the transfer of FSD and Autopilot purchases to future vehicles they purchase. All vehicles are delivered with the FSD hardware, and Tesla simply software locks them, which allows owners to buy FSD at any point after purchase.
This becomes more pressing for owners who are upgrading their vehicles.
FSD Beta Stats
Tesla also revealed how many FSD Beta testers they currently have. According to their 2022 Q2 earnings report, Tesla now has more than 100,000 drivers using FSD Beta across North America.
FSD Beta has now been driven for 35 million miles
Tesla
In the investors' report, Tesla also showed that there have now been more than 35 million miles driven with FSD Beta, more than any other automaker.
Your Tesla is packed with features designed to improve your comfort and safety, and Cabin Overheat Protection (COP) is a prime example. While all the materials and equipment in your car are built to withstand the summer heat, this feature prevents the interior from reaching excessively high temperatures when parked.
But what does it do, how does it work, and when should you really use it? Let’s dive in.
What is Cabin Overheat Protection?
Cabin Overheat Protection is a climate control feature that activates automatically after you’ve left your vehicle. Its primary goal is to keep the interior cabin temperature from soaring on hot days, and helping to keep the surfaces humans touch most often - like the seats, steering wheel, and screen- at a more manageable temperature.
You can also use Cabin Overheat Protection to protect temperature-sensitive items from excessive temperatures; however, its primary goal is to prevent the cabin from becoming excessively hot.
For moderate durations, Cabin Overheat Protection can actually reduce the amount of energy spent cooling your vehicle, as it’s more efficient to maintain a temperature rather than letting cooling it down from 130ºF. However, it most cases, Cabin Overheat Protection will use additional energy.
It is important to note what Cabin Overheat Protection is not. It isn’t designed to protect people or pets. For that, you’ll want to use Tesla’s dedicated “Dog Mode” or “Keep Climate On” features, which offer more robust control over the internal temperature. You can read a comparison of the major climate features here.
Enable Cabin Overheat Protection
Tesla offers several options for cabin overheat protection, allowing you to choose when and how it operates. You can enable it in your vehicle or through the Tesla app:
In the Vehicle: Navigate to Controls > Safety > Cabin Overheat Protection.
Via the Tesla App: Go to the Climate, swipe up, and toggle Cabin Overheat Protection.
Cabin Overheat Protection Settings
When enabling COP, you can pick from three settings:
Off: The system is completely disabled and will not activate when the vehicle is parked. This is the default option.
No A/C: If the interior temperature exceeds your set threshold (see below), your vehicle will only use the HVAC fan to circulate outside air through the cabin. This helps cool the vehicle since outside air is often cooler than the inside, which can easily reach 130ºF or higher. This is our recommended setting, as it helps prevent the cabin from getting too hot in most situations and uses minimal energy.
On: If the interior temperature exceeds your set threshold, the system will use both the fan and the air conditioning to actively cool the cabin down to and maintain it below that threshold. This is the most effective cooling option, but it also uses a significant amount of energy.
You can also set a Temperature Threshold for activating Cabin Overheat Protection. Tesla provides three options: 90°F (30°C), 95°F (35°C), or 100°F (40°C). Cabin Overheat Protection will attempt to maintain your vehicle at the threshold while it is active.
Battery Drain
The main reason you might choose to leave Cabin Overheat Protection off is its energy impact, which will not only increase your costs but also reduce your vehicle’s range. Ultimately, this feature keeps your vehicle’s HVAC system—or at least its fans—running to help cool the cabin.
While the No A/C mode consumes minimal energy, the On mode (which uses air conditioning) will noticeably drain the battery, particularly on hot days when the system works harder to maintain the set temperature.
The amount of energy COP uses will vary greatly based on your selected activation temperature, the exterior temperature, and whether your vehicle is parked in the sun. However, in general, the energy impact will be minimal if COP is set to No A/C, and significant if it’s set to On.
As a reminder, Cabin Overheat Protection will automatically shut off after 12 hours of operation or if the vehicle’s state of charge falls below 20%. COP and several other Tesla features will increase the cost of using your vehicle. We recently reviewed all Tesla features that continue to use power while your vehicle is parked.
Is Cabin Overheat Protection Necessary?
This is a common question, and the answer is no, Cabin Overheat Protection is not essential. Tesla vehicles, including their interior components, are designed and tested to withstand the typical automotive temperature cycles, including both hot and cold. While keeping the cabin cooler could potentially provide some marginal benefit in preventing the leather or other surfaces from degrading, the primary purpose is for the comfort of the occupants when they return.
What About Extreme Cold?
We’ve talked about heat, but what about extreme cold? Cabin Overheat Protection, as the name implies, deals with heat and will not prevent your vehicle from getting too cold. For cold weather, your Tesla has different mechanisms.
Your vehicle will automatically use energy to keep its high-voltage battery within a safe temperature range in extreme cold, whether or not you’re in the car. This helps protect the battery’s health and ensures you’ll have a minimal level of performance even if you enter the vehicle without preconditioning.
For optimal comfort in cold weather, preconditioning your vehicle will warm up the cabin and battery for improved performance.
Cabin Overheat Protection is a valuable feature that improves the comfort of your Tesla, particularly during hot weather. However, it’s not designed to improve the lifespan of your vehicle's interior, and it should not be used for people or pets (use Keep Climate or Dog Mode for those situations).
If you're parked in extreme heat and have sensitive items in the car, this could be an ideal use case. Use Keep Climate if you need to keep the items below 80°F, or Cabin Overheat Protection if you’re just looking to protect them from excessive temperatures.
Tesla’s recent focus on expanding and vertically integrating its battery production is beginning to take global steps, starting with a battery recycling and service center in South Australia. In Marion, a suburb of Adelaide, the council recently voted in favor of a proposal that would see contaminated public land developed and leased to Tesla.
The move promises local jobs and environmental remediation but has garnered a lot of public debate focused on Elon’s moves outside his role as CEO.
The proposal involves a site that’s currently unusable for recreation due to chemical contamination. A local developer plans to acquire and remediate the land, constructing a new facility specifically for Tesla. This site would reportedly serve two purposes: recycling old lithium-ion batteries and serving as a Tesla Service Center.
Tesla’s Commitment to Recycling
Tesla recently announced its intention to ramp up its battery recycling and repurposing efforts. During the Q1 2025 Earnings Call, Tesla’s executives highlighted substantial progress. Tesla had recycled enough materials in Q1 2025 to build approximately 21,000 Model Y RWD vehicles, representing a 136% year-over-year increase from Q1 2024.
Dedicated regional hubs like this one would be a logical next step in expanding the recycling loop and furthering Tesla’s vertical integration while also reducing its reliance on new materials. In addition, local sources also mentioned that Tesla could be repurposing older lithium-ion batteries for other purposes, including their inclusion in stationary battery storage systems like Powerwall or Megapack.
Of course, the facility also has major benefits for the local community, including creating around 100 local jobs, as well as injecting approximately $56 million into the local economy. Further, developing the contaminated land as a renewable facility is one of the safest ways to use the land that’s been sealed off from the public for nearly a decade.
Elon’s Image
The proposal isn’t without its critics. Local opposition was voiced during community consultations, with most of the negative sentiment directed towards Elon rather than the facility itself. Despite these complaints, the local council elected to proceed, arguing that tangible economic and environmental benefits far outweigh any perceived geopolitical or symbolic harm that shutting down the project could cause.
With the council’s endorsement on record, the proposal now moves to the South Australian state government for approvals regarding the change in land classification.