Tesla's Sentry Mode captures videos from up to four cameras at once
Not a Tesla App
Tesla Sentry Mode is an intelligent vehicle security system designed to monitor and record potential threats around your parked Tesla. This feature utilizes the vehicle's cameras and sensors to detect suspicious activity, notify the owner through the Tesla mobile app, and save footage to a USB drive.
What is Sentry Mode
When enabled, Tesla Sentry Mode keeps the vehicle's cameras and computer powered on and ready to record potential threats while the car is locked and in Park. If a threat is detected, the system pulses the headlights, displays a message on the touchscreen, and may sound the alarm, depending on the situation. In addition, footage of the event is saved to a USB drive, and the owner will be notified via the app if the alarm goes off. Sentry Mode offers an extra layer of security for Tesla owners, helping to deter would-be thieves or vandals.
Cameras and Sound
While Sentry Mode is enabled, it will record from four of the vehicle's nine available cameras. The video recorded comes from one of the front-facing cameras, the fender camera on either side of the vehicle, and the rear camera. The other remaining front-facing cameras, B-pillar cameras, and the cabin camera do not record at this time.
Teslas do not contain any external microphones, so all Sentry Mode videos are silent. Although Teslas do contain internal microphones, Tesla does not capture audio from these microphones. In fact, even if you're viewing the interior camera in the Tesla app, you can not hear any audio from inside of the vehicle.
How to Turn On Sentry Mode
You can enable Sentry Mode by tapping Controls then tapping 'Sentry.' The Sentry Mode icon will turn red when Sentry Mode is enabled. You can also choose to turn on Sentry Mode automatically when the vehicle is parked or activate it using the Tesla mobile app. Voice commands like "Keep Tesla safe," "Keep my car safe," "Sentry on," or "Enable Sentry" can also be used to enable the feature.
Enable Sentry Mode from the Controls menu
Not a Tesla App
How Long Does Sentry Mode Stay On
Once Sentry Mode is enabled, it will remain on until you turn it off, or when your battery reaches 20%. If the battery falls below this level, Sentry Mode will turn off, and you will receive a notification via the Tesla app. Since Sentry Mode increases power consumption, Tesla turns it off automatically to leave you with enough energy to reach your destination.
Sentry Mode Battery Drain
Since your vehicle's computer needs to remain on to process video from its various cameras, there is additional power usage while Sentry Mode is enabled.
The actual amount of power consumed varies based on your vehicle's specific hardware, but tests have shown that the vehicle will consume about 250 to 300 watts while Sentry Mode is on. This is equivalent to losing about 1 mile of range for every hour Sentry Mode is enabled.
In a day, Sentry Mode may consume as much as 7.2 kWh, about 24 miles of range, or roughly equivalent to 7% to 14% of your battery, depending on your model and battery size.
Since Sentry Mode consumes so much energy, it's best to use it only when needed. Sentry Mode is not meant for when your vehicle will be parked long term, as it'll quickly drain your battery. Luckily, Tesla offers options to automatically enable Sentry Mode at specific locations and Sentry Mode is automatically disabled when the vehicle's battery falls to 20%.
Sentry Mode Options
You can customize Sentry Mode settings to fit your preferences and requirements. Some options available include:
Disabling sounds: If you want to silence the security alarm and audio system when the alarm is triggered, navigate to Controls > Safety > Disable Sentry Sounds. Sentry Mode will still send a notification through the mobile app and save the last 10 minutes of footage of any events that occurred.
Excluding specific locations: In Controls > Safety > Sentry Mode, you can choose not to enable Sentry Mode in particular areas, such as your home, work, or favorite destinations. This can be helpful if you want to conserve battery power or avoid unnecessary recordings in familiar areas.
Choosing the clip length: In some markets (Not available in the U.S. and Canada), you can select the length of Sentry Mode video clips, allowing you to customize how much footage is saved during an event.
Disabling camera detection: If you prefer, you can disable camera detection so that Sentry Mode only activates when the car senses a physical intrusion. This can be helpful in situations where you want to minimize the number of false alarms or unnecessary recordings.
How to Set Up Sentry Mode
First, insert a compatible USB drive into the glove box USB port. If your car doesn't have a USB port in the glove box, you can use one in the center console. Note that not all Teslas have data-capable USB ports in the center console, so the glove box should be your first choice. Chances are that Tesla already included a compatible USB drive in the car for you. Tesla defines a compatible USB drive as one that is USB 2.0 compatible and holds at least 64 GB. This Samsung USB drive is a good choice for Sentry Mode because of its durability and size. It offers fast write speeds and 256GB of storage, 4x Tesla's recommendation.
Next, you can format the USB drive by going to Controls > Safety and tap on "Format USB Drive." Tesla recommends using a high-quality USB drive to ensure smooth recording and playback of Sentry Mode videos. You can also enable Dashcam recording. Navigate to Controls > Safety > Dashcam in your vehicle's menu and set it to Auto. This will allow your vehicle to automatically record footage while driving. Footage will automatically be recorded when an event is detected or when you tap the Dashcam icon under Controls > Dashcam.
How to View Sentry Mode Recordings
You can review your Sentry Mode video with the Dashcam Viewer app in the car
Not a Tesla App
To view Sentry Mode or Dashcam videos, use the Dashcam app in your vehicle. The Tesla system tags events with a red dot, making locating and reviewing footage easier. This feature allows you to quickly identify any incidents around your vehicle and gather evidence if necessary. Remember to regularly check your USB drive's storage capacity, as new recordings will overwrite the oldest ones when the drive is full. It's a good idea to back up important footage to a separate storage device for safekeeping.
Sentry Mode Live Access
You can view live footage from your vehicle in the Tesla app
Not a Tesla App
Sentry Mode Live Access lets you view your vehicle's cameras in real-time using the Tesla mobile app. This feature requires Tesla's Premium Connectivity. When using View Live Camera, your vehicle will periodically flash its exterior lights and displays a message on the touchscreen, notifying others that the area surrounding the vehicle is being viewed through the cameras.
To enable the View Live Camera feature, touch Controls > Safety > Sentry Mode > View Live Camera via Mobile App on the car's touchscreen. First, ensure no occupants are in the vehicle, and all doors are locked. Then, navigate to Safety > Sentry Mode > View Live Camera in the Tesla app. The live camera feed is fully encrypted and cannot be accessed by Tesla, ensuring your privacy. View Live Camera is limited to approximately one hour (or 15 minutes for some regions) of cumulative usage per day. Although Sentry Mode Live Access is widely available, it is not currently available in all markets.
If your vehicle is equipped with a pedestrian warning speaker you can press and hold the microphone button in the app to transmit your voice through the speaker, potentially deterring would-be intruders or vandals.
When Dog Mode or Sentry Mode are enabled, you can also switch the live camera view to see through the vehicle's interior camera. This can be useful if you want to check on your pet while away from the vehicle. Note that this feature is not supported in vehicles with Autopilot computer 2.0 or 2.5.
Tesla Sentry Mode is a valuable security feature that can help protect your vehicle from potential threats. By following the steps provided, you can set up, enable, and customize this feature to fit your needs. As a Tesla owner, using Sentry Mode can give you peace of mind, knowing that your car is actively monitoring its surroundings for potential threats. While no security system can prevent all attacks, Sentry Mode offers an added layer of protection that can help deter criminals and keep your vehicle safe.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
With most vehicles moving on to Tesla’s 2025.14 Spring Update, we’re now taking a look at all the undocumented features that were discovered during Tesla’s 2025.8 update.
While these features tend to be smaller in nature, some of them are just as valuable as the features outlined in Tesla’s release notes in the vehicle.
This update includes changes such as improvements to maps, trip meters, and Rainbow Road. Let’s take a look at all the undocumented features in Tesla’s 2025.8 software update.
New Map Icons
Not a Tesla App
Icons on the map are being redesigned to be rounder and easier to see. They now feature a white border to make them pop out against a colorful background, which is especially better when using satellite views.
This feature started rolling out slowly but should now be available to everyone.
Trips & Odometer
Not a Tesla App
The Trips display has been improved to show more precise information, and a new metric has been added.
More Precision: The trip meters will now show values with a tenths place when they’re under a certain value. That means that the Current Drive and Since Last Charge trip meters will now show a fractional kWh and a mile. This is especially useful for Current Drive.
The Current Drive meter is automatically reset when your vehicle comes out of park so that it can track your current drive, while the Since Last Charge meter automatically resets after a charging session completes.
More Data: In addition to added precision, the Current Drive now features a new data point. kWh is now shown for the current drive, just like the other trip meters. Previously, the Current Drive showed minutes instead of kWh -- it now features both.
These changes affect the Trips widget in the Model 3, Model Y and Cybertruck. While the added precision is also added to all vehicles under Controls > Trips, the new kWh metric for the Current Drive is only displayed in the small widget.
Additional Tool Tips
Not a Tesla App
Tesla has added some additional tips to the screen that show up in certain cases. For example, if you’re playing audio over Bluetooth, Tesla will suggest that you use their built-in music apps instead of streaming through your phone.
Destination Charging
Not a Tesla App
Destination charging icons are now visible on the map when you have Points of Interest enabled. You can enable Points of Interest by tapping on the map and choosing the Points of Interest icon on the right side near the satellite imagery icon.
Some destination chargers may charge a fee, while others may be open to the public or exclusive to paying customers.
Navigation Improvements
Not a Tesla App
If you're using Tesla's navigation system with voice guidance enabled, the spoken directions will now stop immediately when you end the trip. Previously, the spoken directions would continue being played until the phrase was completed.
Improved Rainbow Road
Not a Tesla App
The rainbow road feature has been greatly improved in this update with FSD. Rainbow road, which can be enabled in the Toybox app, now changes the vehicle's path when on Autopilot from a blue path to a rainbow one.
Previously, Tesla had to overlay the blue path on top of the rainbow colors because rainbow road didn’t support all the features of the path, such as showing chevrons when slowing down rapidly.
With this update, the rainbow path now incorporates all the same features as the blue path when FSD is active.
In addition, if you start Rainbow Road by tapping the right stalk four times, audio will play. Unfortunately, the sound couldn’t be stopped until it was completed before, but with this update, you can now stop the audio by reducing the volume with the left scroll wheel.
Additional Transparency Effects
Not a Tesla App
On Intel vehicles, several modules didn't include a transparency effect. This was primarily due to Intel cars not using the blur effect since it could slow down the infotainment unit.
With this update, Tesla has enabled the transparency effect across a set of modules. Notably, this fixes the issue when using full-screen visualizations where the music player had transparency, but the navigation module on the right did not.
Transparency has also been added to other modules that are displayed over the map, such as the list of Superchargers, destinations, search results, and the ETA / End Trip module displayed at the bottom.
Note: Due to the lack of the blur effect on Intel due to performance reasons, these changes could make some text more difficult to read.
No Phone Key Graphic
Not a Tesla App
The graphic that's displayed in the vehicle when it doesn't detect a phone key has been updated. Tapping on the blue text at the bottom displays the old animation showing you where to tap a key card.
Bluetooth Player
Not a Tesla App
The Bluetooth app typically only displays the connected devices and a button to connect a new device. There was a lot of white space, since there wasn’t much other information to display.
With this update, Tesla is making it easier to jump to another source by displaying available music streaming services underneath the connected Bluetooth device.
Tapping a music service will jump to the selected service.
Service Mode Release Notes
@scotsrule08 on X
As with most Tesla updates, Tesla usually adds or improves Service Mode with additional features, making diagnosing and fixing problems easier. This update adds or improves the following items.
New HVAC Panel
A new HVAC panel is available to support HVAC system diagnosis. It adds the ability to determine the status of the HVAC actuators, HEPA filter, and blower motor.
Applies to: Cybertruck
HV Battery Panel Update - Moved State of Health (SOH) Routine
The State of Health (SOH) routine in the HV Battery panel has been moved to the Controls > Service tab, which does not require entering Service Mode or Service Mode Plus.
Applies to: 2021+ Model S, 2021+ Model X, Model 3, Model Y
Windows Panel Update - Rear Defrost Routine
The rear defrost component on the Windows panel has been updated to simplify diagnostics. The re-enable routine will now be visible all the time, but it can only be ran when a condition requiring its usage is detected.
Applies to: 2021+ Model S, 2021+ Model X, Model 3, Model Y
Seats Panel Update - Cabin Radar and Seat Sensor
The Seats panel has been updated to show whether the cabin radar and/or seat sensor is being used to detect occupants in the front seats.
The gateway configuration for the steering column motor type can now be updated on the Steering panel.
Applies to: Model 3, Model Y
Service Mode Update - Media Source Switches to Bluetooth
When entering Service Mode, the Media Source will now automatically switch to Bluetooth to prevent the vehicle from playing media using the customer's connected media accounts.
Applies to: Model S, Model X, Model 3, Model Y
Charging Panel Update - Charge Port ECU Reset Routine
The Charge Port Electronic Control Unit (ECU) reset routine, TEST-RESET_CP, has been added to the Charging panel, which may be required after performing Charge Port related service.
Applies to: Model 3, Model Y, Palladium S, Palladium X, Cybertruck
Noise Recording Panel Update - Moved to Tools
The Noise Recording panel has been moved from the the High Voltage panel to the Tools panel. To access the panel, tap Tools > Noise Recording.
Applies to: Cybertruck
Coolant Panel Update - Coolant Purge Status Indicator
An indicator has been added to the Coolant panel to report the status of the coolant purge and whether the coolant purge needs to rerun.
Applies to: Cybertruck
Next Update
Tesla’s next update is the 2025.14 Spring Update, which has now rolled out to more than half of the Tesla fleet. If you’re still waiting for it, rest assured that you should be updated soon. If you’ve already updated, be sure to check out the undocumented features already found in the 2025.14 update.
Tesla has issued a strong denial in response to a Wall Street Journal report (Paywall) which claimed that Tesla’s Board of Directors had initiated a search for a new CEO.
In a statement posted directly on Tesla’s X account, Board Chair Robyn Denholm denied the report unequivocally. As per the statement, Tesla’s board did not reach out to recruiting firms in search of a new CEO.
Earlier today, there was a media report erroneously claiming that the Tesla Board had contacted recruitment firms to initiate a CEO search at the company.
This is absolutely false (and this was communicated to the media before the report was published).
The statement reaffirmed the board’s position on Tesla’s current leadership and that the board is highly confident in Elon’s ability to continue executing Tesla’s plans and future growth.
This confidence behind Elon follows his recent statements made during the Q1 2025 Earnings Call that he would be stepping back from the Department of Government Efficiency (DOGE) in the coming days and significantly reducing time spent there. Instead, he would be returning to focus on Tesla’s operations and the upcoming deployment of Robotaxi.
Shortly after the denial was posted, Elon Musk also commented on the report, specifically tagging the Wall Street Journal and criticizing their handling of the report.
It is an EXTREMELY BAD BREACH OF ETHICS that the @WSJ would publish a DELIBERATELY FALSE ARTICLE and fail to include an unequivocal denial beforehand by the Tesla board of directors! https://t.co/9xdypLGg3c
We’re glad to see Tesla and Elon set the matter straight, but there could have been a better way to spread this message and maybe even prevent the report from WSJ from going out.
We recently published an opinion piece on why Tesla needs its PR team back, and this specific incident is a good example. Relying solely on platforms like X for critical corporate communications - and in this case, late at night (1 AM EST), with limited reach outside the existing follower base seems like an ineffective way of communicating important company information.
We’d love to see Tesla really put some thought into managing its image, as it seems that several recent reports from major financial news organizations have apparently been wrong.
Either way, the board’s stance is clear - there is no active search underway, and Elon has the full backing and support of the board to lead Tesla toward the future.
![Tesla’s B-Pillar Recording Requires HW4 [Update: New Dashcam Viewer Included on HW3 / Ryzen Vehicles]](https://www.notateslaapp.com/img/containers/article_images/tesla-screen/dashcam-viewer-hw3.jpg/ba8281c93679d2cf4a405a771e96b167/dashcam-viewer-hw3.jpg)
![Tesla Semi Keynote: New Features, 46 Charging Sites, Upgraded Battery & More [VIDEO]](https://www.notateslaapp.com/img/containers/article_images/semi/semi-new-features.jpg/c7df4e0d32f8cb0beee080ad201e943b/semi-new-features.jpg)
