You can add a fifth Quick Control icon to the Tesla app
Tesla completely redesigned their app with version 4.0 last year. Since then Tesla has been quickly iterating on its features with
updates and new features coming every few weeks.
With version 4.3 of the
Tesla app, Tesla added the ability to customize the Quick Control buttons on the main screen.
You can add up to four buttons, but with this little trick, you can also add a fifth icon.
Add a Fifth Icon to the Tesla App
To add a fifth icon start by long-pressing the row of icons to bring up an editing screen to sort or replace
those icons with the ones you use most frequently.
Now here is where the fun starts because it will take a little manual dexterity to add the additional icon
but when you do it correctly your sense of accomplishment will out weight your initial frustration.
Here is the trick:
With your right thumb, pick up one of the available icons and drag it over the fourth icon (in the screen
above it is the Front Trunk icon), but do not release it.
While keeping your right thumb held down, use your thumb on your left hand to press on the 1st icon (in the
screen above it is the HVAC icon), and drag it to the second icon (the Defrost icon). The icon you have
brought up will move offscreen to the right into the invisible fifth spot.
Release both fingers simultaneously and VIOLA a fifth icon will magically appear.
Have fun mixing and matching your icons as your needs change. You can update the icon bar as often as needed.
Video
Tesla used to allow users to continue to add an unlimited amount of icons, but it wasn't a great experience
so the total number of icons is now limited to five.
Additional Tips
There are several other useful bits of information about the Tesla app that could make it more useful.
For example, you can tap the battery icon at the top of the screen to access charging information. This
brings up the same information as tapping on the Charge Quick Control icon.
If you prefer tapping the battery icon, you can remove the Charge icon from the Quick Controls area, allowing
you to free up a spot, essentially giving you an extra Quick Control slot.
Wake Up Your Vehicle Quicker
When using the app most commands are executed through the vehicle's internet connection, which requires your
vehicle to be awake.
Waiting for your vehicle to wake up could sometimes take up to a minute, but there is a way to
speed it up if you're within Bluetooth distance (around 30 feet).
Some commands are sent via Bluetooth, which allows them to be completed even if the vehicle is asleep. This
includes locking and unlocking the doors.
When completing one of these commands, your Tesla starts to turn on almost immediately.
If you're waiting for your vehicle to turn on, you can send a command to lock/unlock your vehicle and your
vehicle should wake up quicker than just waiting.
Widget
If you've added a fifth icon to your Quick Controls and use the Tesla app widget, then the widget will now
display all five icons as well.
No Need to Wait
With the introduction of the Tesla app version 4.0 last year, Tesla quietly rolled out a feature that changes
the way you use the app.
Previously, you needed to open the Tesla app, wait for your vehicle to wake up, and then you could send a
command to the car, such as using turning on the climate system or using HomeLink.
However, now you can simply open the app, tap your desired function (it'll show a spinning circle) and you
can quit the app.
Instead of the command going directly to your car, it will now be sent to Tesla. Tesla's servers will be the
ones who wait for your vehicle to wake up, and when it does, Tesla will execute the command.
If for some reason Tesla isn't able to wake up your vehicle due to a poor connection or another error, then
you'll receive a notification saying the command failed.
This makes turning on the HVAC system a much more enjoyable experience.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
After years of anticipation, the wait is over. Tesla's Robotaxi network officially launched with its first public rides for early access users in Austin, Texas, on Sunday, June 22nd.
The launch was a veritable firehose of new information, revealing everything from the booking process and in-car experience to new FSD features expected in the next version of FSD. Here’s a complete recap of everything we learned from what is sure to be a historic first day.
The Robotaxi App
The experience begins in a new, dedicated Robotaxi app. For now, access is invite-only and that app is not available in the App Store. Invitees received a special link to download the Apple-only app onto their device. Once you’re in the app, you’re asked to log in with your Tesla account, which will then bring over all your settings from the Tesla app, such as your profile photo and payment details.
While the app is only available for iPhone users today, an Android version is already confirmed to be in the works.
Booking a Trip
Once you’re in the app, you can set your destination and hail a ride. Once you have a ride booked, the app provides live tracking of the approaching Robotaxi, including its exact location and the estimated time of arrival.
One limitation noted by early-access testers is that the pickup point is currently fixed, and you can’t change it. The pick-up location will be relatively close to where you requested the ride, but some users noted having to walk up to a block to get to the pick-up location chosen by the app.
After initiating a ride, your phone will display a Live Activity, providing an auto-updating view of your taxi's location and ETA. This is similar to the Supercharger Live Activity that Tesla launched recently.
The Live Activities on iOS for the Robotaxi App
Joe Tegtmeyer on X
In-App Tips
While many early Robotaxi users are expected to be Tesla owners, Tesla is creating a user-friendly experience by offering in-app tips, such as how to open the Model Y doors.
When your ride arrives, its exterior lights pulse, letting you know this vehicle is picking up a passenger at the given location. This helps it differentiate between other Tesla vehicles on the road and other Robotaxis potentially dropping someone off at the same location.
The helpful tip on how to open the door handles.
@DirtyTesLa on X
The exterior lights pulse prompt in the app.
@DirtyTesLa on X
Information Synced to Robotaxi
To get that special Tesla touch of magic, once your vehicle arrives, it automatically syncs the rider’s personal vehicle details to the Robotaxi.
That means when you go to play Spotify, YouTube Music, or other media, you’re already signed in and it’s using the same account you use on your own personal Tesla. Even Netflix and other video services are signed in, so that you can start streaming them in the back seat.
The hub of the passenger experience, for now, is the 8-inch rear touchscreen of the new Model Y. The UI is clean and simple, displaying the trip map, estimated arrival time, and controls for media and climate.
The screen also provides passengers with access to key safety features, including a large “Pull Over” and “Support” button. For the early access program, a human Safety Monitor sits in the front passenger seat and has access to one additional control on the main screen - Stop in Lane.
Once you’re inside the vehicle and have fastened your seatbelt, the ride doesn’t begin immediately. You must tap the “Start Ride” button on either the rear passenger screen or within the Robotaxi app for the vehicle to start moving.
@DBurkland on X
The Ride and Geofence
One of the most important questions is: How does it drive? The first impressions have been overwhelmingly positive. Early-access riders have mentioned that FSD’s performance is extremely smooth, noting that it handles turns, speed bumps, and stops with a new level of grace. While FSD V13 is already incredibly smooth, Tesla may have tweaked it for this Robotaxi version, or it could be taking things a little slower with the initial rollout.
Robotaxi slows down really nice for speed bumps. Extremely smooth stops as well pic.twitter.com/H8R2pXllWB
The service operates within a defined geofence in Austin, which initial reports suggest takes about 30 minutes to go from one side to the other.
Interestingly, you can actually book a trip that has a destination or start point outside the geofenced area. In these cases, the Robotaxi will simply take you to the edge of the service area or choose a pickup location that’s within the service area.
The current service area for Robotaxi
@SawyerMerritt on X
Robotaxi Command Center
The significance of this day hasn’t been lost on Tesla’s teams. Ashok Elluswamy, VP of AI, shared a photo from what appeared to be a launch party at the Robotaxi operations center.
The command center features various TVs showing real-time information from the active Robotaxis. According to what Musk shared a couple of weeks ago, Tesla planned to have 10 Robotaxis on the first day, which aligns with what is displayed on the list on one of the TVs.
Other TVs are showing live views from the Robotaxis’ cameras, displaying six of the vehicle’s cameras, which appear to include the front camera, repeaters, B-pillar cameras, and rear camera. The only cameras excluded appear to be the front bumper camera, the front-facing wide-angle camera, and the cabin camera.
Another TV is displaying a weather radar, while another is displaying a live view of the Robotaxi vehicles on a map. However, one of the most interesting is one near the middle, which is displaying Robotaxi statistics. The display shows that there have been 112 rides across 499 miles as of the time the photo was taken. Another statistic shows a value of 35, but it’s unclear what this number represents. Given the 10 expected Robotaxis, this likely has to do with how many users are queued for a ride, or includes active riders plus users waiting for a ride.
Many team members have also taken to X and commented on the significance and status of the launch, celebrating a decade’s worth of hard work finally coming to a culmination. While there’s still a lot of work to do, the launch is a huge first step to Tesla opening up its Robotaxi service to everyone and releasing FSD Unsupervised for customer-owned vehicles.
Check out this smooth start-to-finish ride from Sawyer Merritt:
Here is my experience (in 4K) from earlier today in one of the world's first ever public Tesla Robotaxi rides in Austin, Texas with FSD Unsupervised! No-one is in the driver seat and the safety monitor in the passenger seat does not have a steering or pedals.
Next up? We expect Tesla to open up rides to the general public and gradually expand its geofence area. There’s also a new FSD update coming that increases parameters by 4.5x, which should make the vehicles even smoother and more capable.
With the first Tesla Robotaxi rides starting shortly for early access users in Austin, Tesla has published a detailed set of rules for its first passengers.
They outline everything from who can ride to how you can behave in a car with no driver, and are designed to ensure safety. Tesla is using a safety monitor during the initial rollout phases, so the front passenger seat will not be available for customers.
Who Can Ride
Tesla has laid out clear guidelines on who is eligible to be a passenger, as well as some expected in-car conduct.
You must be at least 18 years old to book a ride and to ride alone. Riders are permitted to bring one guest, provided that the guest is also over the age of 18. You cannot book a ride for another person; the account holder must be present for the entire trip.
That’s all pretty straightforward, and we expect Tesla to relax some of the rules in the coming months. That means that once the safety monitor is gone, the number could increase to three or four.
How to Behave
All passengers must remain seated with their seatbelts fastened for the entire duration of the ride. There is a strict prohibition on smoking, vaping, or consuming alcohol or other drugs inside the vehicle.
Riders are also asked to be courteous and leave the Robotaxi in the same condition as they found it. Those who damage or dirty the vehicle may be charged an additional, currently unspecified fee after the ride.
Hands Off: Driverless Vehicle
This is where the rules get a bit more interesting, focusing on the unique fact that the Model Ys that Tesla is using still have driver controls.
Riders are prohibited from sitting in the front-left driver’s seat. Additionally, riders must not tamper with, modify, or attempt to physically manipulate any vehicle equipment, including the steering wheel and pedals.
Interestingly, Tesla also has a rule on reverse-engineering and intellectual property protection. While photos and videos of the experience are permitted, riders are prohibited from bringing onboard instruments or equipment intended to record, measure, or conduct surveillance on Robotaxi.
Service Animal Exception
For riders with disabilities, Tesla has outlined a specific policy. Only small service animals that are trained to work or perform tasks are permitted in the vehicle. No other pets are allowed.
However, riders are not required to provide proof; however, support may ask you to confirm that the animal is required due to a disability and what task it is trained to perform.
At this point, we’re not sure whether Tesla will allow non-service animals in its Robotaxi Network in the near future. It would make sense if they did - many people travel with their pets, or need to take them from one location to another - but for now, only service animals will be allowed.
Tesla is definitely taking a safety-first approach in the initial launch, and with the presence of the Safety Monitor, they’re being very cautious. There is a long way to go before the average person becomes comfortable with an autonomous vehicle with no one in the driver’s seat, and building public trust is a good first step.
![Tesla Launches Robotaxi: Features, Robotaxi App, Command Center and First Impressions [VIDEO]](https://www.notateslaapp.com/img/containers/article_images/2025/robotaxi_rear_screen.jpg/bf5ea088bdebda8ca7e0aa1503b69f4e/robotaxi_rear_screen.jpg)
