The Cybertruck is not just about power; it's also about a unique user experience. The app update provided a glimpse into the Cybertruck's distinct user interface, showcasing a design divergence from Tesla's other models. This UI image, extracted from the app, shows a fresh approach, keeping in line with the vehicle's futuristic appeal.
Earlier, we discovered the infotainment screen displayed the Cyber Owl while Sentry Mode is activated. Its red eyes glow, offering a unique and cool appearance.
However, with this new image, the Cybertruck UI reveals several things. This UI is radically different from what we see in other 'single-screen' models, like the Model Y.
Visualization & Map
The most obvious change in this 'Parked' screen is that the vehicle is now predominately displayed in the center of the expected 18.5" screen. The navigation map is much smaller, and instead of taking up the right two-thirds of the screen, a portion of it is subtly displayed on the top right corner. However, once the vehicle moves out of park, the map area would likely enlarge to take up the majority of the screen.
App Icons
The familiar app icons along the bottom have been aligned vertically and moved to the left side of the screen. They're also displayed on the right side, for passenger use. In the image we see the same icons displayed on the left and right sides of the screen, but Tesla has talked about passenger preferences in the past, so it wouldn't be unrealistic if Tesla offered a customized version of apps for the passenger.
Looking closer at the app icons, it's not conclusive what they are, but they appear to be the usual suspects, including Apple Music, the Energy app, Camera app, the All Apps icon, which is followed by the most recent app, the phone.
After the apps, there are temperature controls, seat heaters and the familiar Controls or settings icon in the bottom left corner. The seat heater icon is activated on the passenger side, however the Cybertruck is expected to include ventilated seats as well.
On the bottom right corner we have the air bag icon, which indicates whether the passenger airbag is enabled.
The top right corner has the passenger volume control, as well as what looks too be a new icon, possibly to shift or swap the display layout, bringing certain elements closer to the passenger, much like the Model S.
Display Size & Ratio
While its expected that the Cybertruck will include a 18.5" screen, the largest display of any Tesla, not much else is known
With this new image, we can conclude that the display will be 16:9, like the Model Y's. On both the Model S and Model Y, Tesla includes displays with about 150 pixels per inch, so we can expect something similar in the Cybertruck.
If Tesla ends up going with a 18.5" screen at 150 PPI, we may see a display with a resolution of about 2420x1360.
Status Icons
The status icons, such as battery, time and temperature are displayed at the top, aligned toward the driver. While other status icons, such as WiFi are aligned center. In the image we can see the lock icon, what appears to be the driver profile icon, alerts, WiFi, Sentry Mode, but the last two icons are harder to make out, and they could be Cybertruck specific features.
3D Terrain
As we've seen in several other images, the Cybertruck 3D model appears to be displayed in a 3D environment. There have been hints that Tesla is looking to show 3D terrain in the driving visualizations, and this could be our first glimpse at this integration.
V12 Software Update
The Cybertruck is truly a unique vehicle and the UI appears to be just as unique. Tesla has introduced major UI updates in the past, with v11, not to be confused with FSD Beta v11, was introduced last holiday season. It's possible that some of these UI elements will carry over to other vehicles, in particular the status icons, the parked view and more.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
Tesla is officially opening up its long-anticipated Robotaxi service — but only for a select, invite-only group. Invitations have gone out to influencers to experience the first autonomous rides this Sunday, June 22, in Austin. Dubbed an “early access” program, this marks the official launch of Tesla’s Robotaxi service and the new Robotaxi app.
Invitation Details
Tesla is taking a cautious approach to its initial rollout. Only invited users — largely influencers and carefully selected individuals — will get to hail a ride using the new Robotaxi app. These early testers will be among the first to experience what Tesla describes as a fully autonomous ride, although not entirely without human oversight.
The invitations were sent out early this morning and offered plenty of new details about the Robotaxi service, the app and ride restrictions.
Human Safety Monitors
Elon Musk previously stated that there would be “no occupant in the driver seat,” and while that’s technically accurate, it’s not exactly what we expected. These Robotaxi rides will have a Tesla employee seated in the front passenger seat. This “safety monitor” will oversee the ride but not intervene unless necessary.
Interestingly, the documents shared with influencers indicate that these safety monitors will be subject to the same restrictions as Tesla owners with FSD Supervised. The cabin camera will monitor their gaze to make sure they’re paying attention and presumably warn them if they stare off to the side for too long.
Teleoperators
While there will be safety monitors in the vehicle, there are also expected to be teleoperators. Although Tesla doesn’t explicitly mention teleoperators, it does note that the cabin camera will only be used in the event of a support request or if “operator assistance” is required in an emergency.
Teleoperators aren’t a surprise at all, as all autonomous vehicles use them today when a vehicle needs help. While in the case of a Model Y, it’s possible for the safety monitor to take over the vehicle, Tesla is preparing for the future when there won’t be a safety monitor in the vehicle and the vehicle doesn’t have a steering wheel like the Cybercab.
Cabin Camera and Mic: Off By Default
Passenger privacy appears to be a priority. Tesla confirms that the cabin camera and microphone will be off by default during the ride. These features will only activate if the rider opts in, requests assistance, or in the case of an emergency. This appears to contradict what Tesla mentions about the cabin camera monitoring the safety driver, but it’s possible Tesla means that these features will be off by default when there isn’t a safety monitor in the vehicle.
Tesla says that after the ride, the camera may be temporarily activated to check for cleanliness or forgotten items before the vehicle continues to its next destination.
Will React to Emergency Vehicles
While we know that these vehicles will be equipped with a newer version of FSD, it’s not yet clear exactly which version it's. However, it appears that this version will now feature sound detection, allowing it to detect and react to emergency vehicles.
Tesla says the vehicles will use the vehicle’s microphone to recognize sirens or other road alerts. If a safety event is detected, the vehicle will reduce media volume and notify users on screen.
Like Tesla’s vision processing, all audio is processed in the vehicle and not transmitted unless explicitly enabled by the rider.
Recording and Sharing Encouraged
Tesla is allowing invited guests to bring one additional guest with them to experience the Robotaxi network. Tesla will be allowing the recording and sharing of photos and videos, so we should have plenty of new details on the Robotaxi soon.
Tesla is also asking users to rate their experience via the Robotaxi app, likely trying to identify any trouble points.
Restrictions for Robotaxi Rides
Tesla’s Robotaxi service will operate within a geofenced area of Austin and will be available between 6:00 AM and 12:00 AM. So, essentially, there are only six hours when Robotaxis won’t be available. Tesla states that users will be able to see the geofence area within the app; however, we currently don’t know the size of this area.
Airport rides are not allowed, presumably due to more complicated scenarios. Tesla also states that the Robotaxi service can be paused at any point due to inclement weather; however, the forecast for Austin over the next week is clear and sunny, so this is unlikely to be an issue.
Pricing and Fees
Tesla’s agreement states that all rides will be priced in U.S. dollars and may include tolls, airport fees, and other regulatory charges. It’s not clear whether invited guests will need to pay for rides, but since Tesla is mentioning prices and doesn’t explicitly state that these rides are free, they’ll likely have to.
We may soon find out what Tesla will charge for Robotaxi rides and compare it to other services, such as Uber and Lyft. However, like all other Tesla pricing, these will likely change over time as well.
Tesla reserves the right to charge users for damages or litter left in the vehicle, according to documents shared with influencers.
Robotaxi App, Not the Tesla App
One of the more surprising revelations is that Tesla is not using the Tesla app for this service. Instead, riders will be required to download a new Robotaxi app. While code related to Robotaxi features has been found in Tesla’s main app, it now appears that the Robotaxi app will serve ride-hailing passengers.
The Robotaxi details we’ve seen in the Tesla app may be for future support when owners start adding their vehicles to the Robotaxi fleet. This way, an owner can open up the Tesla app and know the status of their vehicle.
The Robotaxi app won’t be publicly available on the App Store yet. Instead, invitees will receive a separate download invitation, likely through a service like TestFlight, which allows users to test unreleased apps. Tesla emphasizes that only the original invitee can download and use the app, but hopefully, we’ll have our first look at the Robotaxi app soon.
What’s Next
While this represents a soft launch for Tesla’s Robotaxi service, it offers our first glimpse at what the service will be like in terms of restrictions, geo-fenced areas, price, and, of course, a look at the Robotaxi app. Like all things Tesla, they’ll iterate and improve the app, service, and process over time.
We should have a lot more details and the first ride-along videos soon.
According to a new report from Business Insider, Tesla is planning a week-long production pause for the Cybertruck and Model Y lines at Giga Texas. On the surface, the reason seems pretty straightforward: maintenance and line upgrades.
But Tesla has been infamous for never shutting down lines unless it's an absolute production necessity. Given that this is the third production pause in the last 12 months, this suggests that Tesla is planning something other than routine maintenance.
Official Story
The facts, as reported by BI, are fairly straightforward. Tesla will be shutting down the Model Y and Cybertruck lines from June 30th to July 4th. In a staff meeting at Giga Texas, Tesla stated that the pause would enable maintenance and upgrades to help ramp up production.
While this could seem odd for the recently updated Model Y and Cybertruck lines, it also makes sense as Tesla continuously makes production improvements, rather than waiting for model year updates.
There definitely feels like there’s more to this story than a simple pause, but the timing and context suggest this pause is far more significant.
The Affordable Model
The key to this shutdown is Tesla’s strategy for its more affordable model. Tesla has pivoted away from building Giga Mexico, and is instead planning to build both the Cybercab with its unboxed assembly process, as well as the next-gen affordable vehicle at Giga Texas.
For now, Tesla plans to build the affordable model based on existing production lines within Giga Texas, rather than build a standalone line. This is mostly because Tesla intends for the affordable model to have a high part familiarity with the Model 3 and Model Y.
The Model Y line, in particular, is the prime candidate for this retooling. It is Tesla's most refined high-volume production line, and the tooling and equipment on the line are perfectly suited to enable Tesla’s quick transition to producing the new model.
A week-long shutdown is not enough time for a complete overhaul, but it is the perfect window to begin preparatory work. This could include installing new mounting points for future robotics, rerouting utilities, or even running initial trials for new assembly processes in a portion of the line.
Timing is Everything
This theory makes even more sense in the context of recent events. The cheaper model was initially planned for the first half of 2025, but following reported delays, the timing seems right for Tesla to start incorporating changes to support the new vehicle. While Tesla initially planned for a cheaper model to be based on the Cybercab with its unboxed assembly, they decided to produce one based on the current assembly line to get to market sooner. This isn’t the cheaper, “$25k” vehicle we were all hoping for, but instead a more affordable version of the Model 3 or Model Y.
While the Cybertruck line is likely undergoing standard ramp-up tweaks, the shutdown of the Model Y line likely presents something more. While it could also include maintenance and incorporate updated tools, it may include changes required for the newer model.
More Than Maintenance
While the official reason reported by Business Insider seems fairly plausible, there’s always more under the surface when it comes to major decisions like this with Tesla. Using the planned maintenance window to quietly begin the process of retooling is the kind of move we expect from Tesla.
