After initially unveiling the electric pickup truck in 2019, Tesla has delayed production several times due to supply chain challenges among other economic issues.
While the Cybertruck is going to be built at Giga Texas, Tesla plans to start manufacturing battery packs for the upcoming truck at its Fremont factory, according to Teslarati. It was previously expected that the batteries would be manufactured at Giga Texas, the same factory where the Cybertruck will be assembled however, battery cells and cell pack manufacturing are not yet ready to begin mass production at its newly constructed Gigafactory in Austin, Texas.
Earlier this year, Tesla applied to build a battery and cathode manufacturing facility at Gigafactory Texas. Construction has started but it likely will not be ready in time for the Cybertruck’s projected launch in mid-2023.
Tesla is set to use IDRA's new Giga Press with a clamping force of 9,000 tons to produce the Cybertruck. The new Giga press is comprised of 54 pieces, weighing approximately 170,995 pounds. The Giga Press arrived in Houston, Texas last week and can be expected to reach the Gigafactory in Austin, Texas soon.
IDRA Group is one of Tesla's key suppliers that provide the automaker with giant manufacturing machines. The 6,000-ton Giga Press they constructed gives Tesla the ability to manufacture single-piece ends for the Model Y. Giga Texas will soon receive a 9,000-ton Giga press to manufacture the Cybertruck.
The Q3 earnings release revealed that the Cybertruck is now in the ‘Tooling’ phase of production. The tooling phase is where Tesla starts setting up the machines and production line before a vehicle enters full production. Although production is not fully underway, this is a good sign that Tesla is on track to begin production mid-2023.
The Tesla Roadster 2.0 could be Tesla's next vehicle to hit production
Tesla's Chief Designer, Franz von Holzhausen, has designed the company's entire fleet of vehicles, but the Model S, 3, X, Y, Cybertruck and Semi are not his favorites. "My favorite one is the one that is coming.
I can't talk about (it)," von Holzhausen told CNBC. He then quickly pivoted the conversation away from that topic. Nevertheless, several rumored vehicles will be the next to carry the "T" logo. So, which one is the creative mind of Tesla referring to in his evasive answer?
Franz von Holzhausen Interview
Let's start with the suspects. A cheaper, smaller and less expensive electric vehicle has been predicted for years. More recently, there have been ideas about a van. And then there is the second generation of the highly anticipated Roadster. While von Holzhausen didn't talk about the next one, he did give some clues later in the interview. "My all-time favorite car is a '62 250 GTO (Ferrari). I mean, it is quintessential. It's an insane car. I'm also a big fan of this kind of wedge era. The early (Lamborghini) Countachs, the whole kind of flat, low sports car. Those were always the posters on my wall."
The Designer Loves Sports Cars
When a 54-year-old man reminisces about the cars featured in posters plastered on his wall when he was a kid, he is not excited about a van or a compact vehicle — no, he is excited about a sports car. The second-generation Roadster was unveiled in 2017 simultaneously with the Semi. But there hasn't been much mention of the sports car since. The company is just now delivering Semis, and Cybertrucks are expected in 2023, but the Roadster doesn't have an ETA. Or does it? The chief designer says, "… the one that is coming." So, we can only assume that the Roadster is next to hit the production line.
Tesla Roadster 2.0
A Designer Who has Changed the Industry
One of the first employees of Tesla back in 2008, von Holzhausen, recalls the early days and how things have changed. "There is a moment that I thought when I first joined Tesla that it would be great to see multiple Teslas in one drive experience around town. And now, it's hard to go anywhere without seeing a bunch of Teslas. So, it's great to see the impact that Tesla has had in people's lives but also how it's changed the industry. It really pushed this idea that an EV can be better than an internal combustion vehicle."
He also gave some insight into designing vehicles that have and continue to change the auto industry, "Tesla isn't beholden to what has been done in the past. We are always trying to push the boundaries and deliver on a promise of something fun, something enjoyable and something you would love to own and tell your friends about."
It looks like The Roadster could be the next fun, enjoyable vehicle to tell everyone about.
Tesla’s gearing up for a small "revamp" of its popular Model 3 vehicle, which is set to go into production in the middle of 2023.
According to Reuters, the revamp is called “Project Highland” and aimed at lowering the production costs and increasing the Model 3’s attractiveness and not because it needs a redesign. The Model 3 was launched back in 2017, and Tesla has already sold well over 1 million of them.
According to our sources, don’t expect a design overhaul of the Model 3, though. Instead, Project Highland will focus on reducing the number of components and complexity of the Model 3’s interior.
The main goal of this Model 3 revamp is to increase manufacturing efficiencies and reduce costs. Tesla would like to get the Long Range and possibly the Performance variants of the Model 3 to qualify for the US tax incentive for 2023. Under this tax credit, manufacturers’ suggested retail price for brand-new sedans must be less than $55,000. For SUVs, trucks and vans, the maximum price is capped at $80,000.
Our previous evaluation of the vehicles that would qualify include the Model 3 RWD, Model Y Long Range (AWD), and Model Y Performance. However, this will likely change once the revamp goes into production.
Do not expect new vehicle features to be added to the Model 3, such as a rear display, air suspension, or ventilated seats. These features would raise the price of the Model 3 and create a significant overlap between the Model 3 and the refreshed Model S.
Yoke Steering Wheel
One new feature that is possible in this Model 3 revamp is the introduction of a yoke steering wheel or more likely, a wheel similar to the Tesla Semi, which has capacitive controls and no stalks. The stalks are replaced with capacitive controls on the steering wheel and touch controls on the vehicle's display. We previously reported on this rumor in August.
A few rumors are floating around online including a redesigned front bumper and removal of door handles in exchange for touchless doors like the Cybertruck and Roadster 2.0, although our source tells us that this is cool, but not accurate.
2023 Model 3 Update
Based on recent rumors -Bumper facelift (in line with Y/S/X) -No door handles, wing mirrors or ultra sonics (as Cybertruck) pic.twitter.com/GQ5k64bV4O
Over the past few years, Tesla has made significant efficiencies in the way it builds and manufactures vehicles. Recently, the Model Y switched to a single-mold front casting. This requires 169 fewer pieces and 1,600 fewer welds. To achieve this, Tesla is using its Giga Presses at its Berlin Gigafactory.
TeslaFi is a service that logs your drives and charging sessions so that you can later refer back to them. We highly recommend checking them out if you use your car for business trips and would like to keep track of reimbursements, if you like to see how much you spend on charging or if you just love statistics. View their about us page and see everything they have to offer!
DIMO is building a web3, user-owned network dedicated to supporting the next generation of mobility infrastructure. As a user, you can start today by accessing the best connected vehicle experience via the DIMO Mobile App. It works for nearly any vehicle and across any OEM; users are in control of their data and their DIMO wallet is a conduit to other apps and services, saving time and money. Learn more