Tesla Sentry Mode: What It Is, How to Use It and Battery Drain

Tesla's Sentry Mode captures videos from up to four cameras at once

Not a Tesla App

Tesla Sentry Mode is an intelligent vehicle security system designed to monitor and record potential threats around your parked Tesla. This feature utilizes the vehicle's cameras and sensors to detect suspicious activity, notify the owner through the Tesla mobile app, and save footage to a USB drive.

What is Sentry Mode

When enabled, Tesla Sentry Mode keeps the vehicle's cameras and computer powered on and ready to record potential threats while the car is locked and in Park. If a threat is detected, the system pulses the headlights, displays a message on the touchscreen, and may sound the alarm, depending on the situation. In addition, footage of the event is saved to a USB drive, and the owner will be notified via the app if the alarm goes off. Sentry Mode offers an extra layer of security for Tesla owners, helping to deter would-be thieves or vandals.

Cameras and Sound

While Sentry Mode is enabled, it will record from four of the vehicle's nine available cameras. The video recorded comes from one of the front-facing cameras, the fender camera on either side of the vehicle, and the rear camera. The other remaining front-facing cameras, B-pillar cameras, and the cabin camera do not record at this time.

Teslas do not contain any external microphones, so all Sentry Mode videos are silent. Although Teslas do contain internal microphones, Tesla does not capture audio from these microphones. In fact, even if you're viewing the interior camera in the Tesla app, you can not hear any audio from inside of the vehicle.

How to Turn On Sentry Mode

You can enable Sentry Mode by tapping Controls then tapping 'Sentry.' The Sentry Mode icon will turn red when Sentry Mode is enabled. You can also choose to turn on Sentry Mode automatically when the vehicle is parked or activate it using the Tesla mobile app. Voice commands like "Keep Tesla safe," "Keep my car safe," "Sentry on," or "Enable Sentry" can also be used to enable the feature.

Enable Sentry Mode from the Controls menu

Not a Tesla App

How Long Does Sentry Mode Stay On

Once Sentry Mode is enabled, it will remain on until you turn it off, or when your battery reaches 20%. If the battery falls below this level, Sentry Mode will turn off, and you will receive a notification via the Tesla app. Since Sentry Mode increases power consumption, Tesla turns it off automatically to leave you with enough energy to reach your destination.

Sentry Mode Battery Drain

Since your vehicle's computer needs to remain on to process video from its various cameras, there is additional power usage while Sentry Mode is enabled.

The actual amount of power consumed varies based on your vehicle's specific hardware, but tests have shown that the vehicle will consume about 250 to 300 watts while Sentry Mode is on. This is equivalent to losing about 1 mile of range for every hour Sentry Mode is enabled.

In a day, Sentry Mode may consume as much as 7.2 kWh, about 24 miles of range, or roughly equivalent to 7% to 14% of your battery, depending on your model and battery size.

Since Sentry Mode consumes so much energy, it's best to use it only when needed. Sentry Mode is not meant for when your vehicle will be parked long term, as it'll quickly drain your battery. Luckily, Tesla offers options to automatically enable Sentry Mode at specific locations and Sentry Mode is automatically disabled when the vehicle's battery falls to 20%.

Sentry Mode Options

You can customize Sentry Mode settings to fit your preferences and requirements. Some options available include:

Disabling sounds: If you want to silence the security alarm and audio system when the alarm is triggered, navigate to Controls > Safety > Disable Sentry Sounds. Sentry Mode will still send a notification through the mobile app and save the last 10 minutes of footage of any events that occurred.

Excluding specific locations: In Controls > Safety > Sentry Mode, you can choose not to enable Sentry Mode in particular areas, such as your home, work, or favorite destinations. This can be helpful if you want to conserve battery power or avoid unnecessary recordings in familiar areas.

Choosing the clip length: In some markets (Not available in the U.S. and Canada), you can select the length of Sentry Mode video clips, allowing you to customize how much footage is saved during an event. 

Disabling camera detection: If you prefer, you can disable camera detection so that Sentry Mode only activates when the car senses a physical intrusion. This can be helpful in situations where you want to minimize the number of false alarms or unnecessary recordings.

How to Set Up Sentry Mode

First, insert a compatible USB drive into the glove box USB port. If your car doesn't have a USB port in the glove box, you can use one in the center console. Note that not all Teslas have data-capable USB ports in the center console, so the glove box should be your first choice. Chances are that Tesla already included a compatible USB drive in the car for you. Tesla defines a compatible USB drive as one that is USB 2.0 compatible and holds at least 64 GB. This Samsung USB drive is a good choice for Sentry Mode because of its durability and size. It offers fast write speeds and 256GB of storage, 4x Tesla's recommendation.

Next, you can format the USB drive by going to Controls > Safety and tap on "Format USB Drive." Tesla recommends using a high-quality USB drive to ensure smooth recording and playback of Sentry Mode videos. You can also enable Dashcam recording. Navigate to Controls > Safety > Dashcam in your vehicle's menu and set it to Auto. This will allow your vehicle to automatically record footage while driving. Footage will automatically be recorded when an event is detected or when you tap the Dashcam icon under Controls > Dashcam.

How to View Sentry Mode Recordings

You can review your Sentry Mode video with the Dashcam Viewer app in the car

Not a Tesla App

To view Sentry Mode or Dashcam videos, use the Dashcam app in your vehicle. The Tesla system tags events with a red dot, making locating and reviewing footage easier. This feature allows you to quickly identify any incidents around your vehicle and gather evidence if necessary. Remember to regularly check your USB drive's storage capacity, as new recordings will overwrite the oldest ones when the drive is full. It's a good idea to back up important footage to a separate storage device for safekeeping.

Sentry Mode Live Access

You can view live footage from your vehicle in the Tesla app

Not a Tesla App

Sentry Mode Live Access lets you view your vehicle's cameras in real-time using the Tesla mobile app. This feature requires Tesla's Premium Connectivity. When using View Live Camera, your vehicle will periodically flash its exterior lights and displays a message on the touchscreen, notifying others that the area surrounding the vehicle is being viewed through the cameras.

To enable the View Live Camera feature, touch Controls > Safety > Sentry Mode > View Live Camera via Mobile App on the car's touchscreen. First, ensure no occupants are in the vehicle, and all doors are locked. Then, navigate to Safety > Sentry Mode > View Live Camera in the Tesla app. The live camera feed is fully encrypted and cannot be accessed by Tesla, ensuring your privacy. View Live Camera is limited to approximately one hour (or 15 minutes for some regions) of cumulative usage per day. Although Sentry Mode Live Access is widely available, it is not currently available in all markets.

If your vehicle is equipped with a pedestrian warning speaker you can press and hold the microphone button in the app to transmit your voice through the speaker, potentially deterring would-be intruders or vandals.

When Dog Mode or Sentry Mode are enabled, you can also switch the live camera view to see through the vehicle's interior camera. This can be useful if you want to check on your pet while away from the vehicle. Note that this feature is not supported in vehicles with Autopilot computer 2.0 or 2.5.

Tesla Sentry Mode is a valuable security feature that can help protect your vehicle from potential threats. By following the steps provided, you can set up, enable, and customize this feature to fit your needs. As a Tesla owner, using Sentry Mode can give you peace of mind, knowing that your car is actively monitoring its surroundings for potential threats. While no security system can prevent all attacks, Sentry Mode offers an added layer of protection that can help deter criminals and keep your vehicle safe.

Is Tesla Planning to Add Steam Support to All Vehicles?

Not a Tesla App

Yesterday, we reported that Tesla updated their Steam integration on Model S and Model X vehicles. The update was part of their 2024 Holiday Update, but it looks like there may be more to this than a simple update.

Steam, a video game library app, makes it easy for users to buy or launch games on their computers. However, a couple of years ago, Valve, who created Steam, launched their own standalone device, the Steam Deck. The Steam Deck runs a custom OS based on Linux.

Steam Launch

When Tesla launched the redesigned Model S and Model X, Tesla introduced a dedicated gaming GPU with 16GB of RAM and touted the ability to play top-tier PC games in Tesla vehicles.

In 2022, Tesla finally launched the Steam app for the Model S and Model X as part of its 2022 Holiday Update. The Steam app runs Steam OS, the same OS as the Steam Deck in a virtual environment.

However, earlier this year, Tesla stopped including the GPU and Steam (Beta) in their vehicles, and we haven’t seen any updates to the Steam in quite some time. In fact, we thought Tesla was axing their gaming-on-the-go dreams.

SteamOS Update

The Steam app, which is still in Beta, is getting an interesting update for the Model S and Model X vehicles with the discrete GPU.

Those vehicles received an update to SteamOS 3.6 - the same version of SteamOS that runs on the Steam Deck. While nothing has visually changed, there’s a long list of performance optimizations under the hood to get things running smoother.

Comparing Steam Deck to Tesla Vehicles

Let’s take a look at the Steam Deck - according to Valve, its onboard Zen4 CPU and GPU combined push a total of 2 TFlops of data, which is fairly respectable, but much lower than today’s home consoles. The Steam Deck is capable of 720p gaming fairly seamlessly on low-to-medium settings on the go and is also built on the AMD platform.

AMD-equipped Teslas, including the Model 3 and Model Y, are packing an older Zen+ (Zen 1.5) APU (processor with a combined CPU and GPU). AMD claims that the V1000 - the same embedded chip as on AMD Tesla vehicles (YE1807C3T4MFB), brings up to 3.6 TFLops of processing power with it, including 4K encoding and decoding with the integrated GPU on board.

While that’s not enough for 4K gaming or comparable to a full-blown console or desktop GPU, that’s enough raw horsepower for light gaming and is currently more powerful than the Steam Deck.

The Model S and Model X’s GPU brings that up to about 10TFlops of power - comparable to modern consoles like the Xbox Series X at 12 TFlops.

Steam Gaming for All Vehicles?

The fact that Tesla is updating SteamOS even though the feature is no longer available in any new vehicles could indicate that Tesla is not only bringing Steam back to Teslas but that it’s going to play a much bigger role.

While SteamOS is run in a virtual environment on top of Tesla’s own OS, we could see Tesla bring SteamOS to all of its current vehicles, including the Model 3, Model Y, and Cybertruck. Steam in these vehicles would likely support any game that’s capable of running on the Steam Deck.

We think this Steam update, which includes performance improvements and a variety of fixes, has quietly passed under most people’s radars. This could be a very exciting update for those who enjoy gaming, especially for those who love to do it in their Tesla.

Follow

Follow

Follow

Tesla Holiday Update Weather Features: All the Small Details

Robert Rosenfeld / YouTube

As part of Tesla’s 2024 Holiday Update, Tesla included two awesome new features - Weather at Destination and the long-awaited Weather Radar Overlay. These two features are big upgrades built upon the weather feature that was added in update 2024.26. The original weather feature added an hourly forecast, as well as the chance of precipitation, UV index, Air Quality Index, and other data.

However, this update also added some smaller weather touches, such as the vehicle alerting you if the weather at the destination will be drastically different from the current weather.

Not a Tesla App

Weather At Destination

When you’re navigating to a destination and viewing the full navigation direction list, the text under the arrival time will show you the expected weather next to your destination. You can also tap this, and the full weather pop-up will show up, showing your destination's full set of weather information.

Note the weather under the arrival time

Not a Tesla App

You can also tap the weather icon at the top of the interface at any time and tap Destination to switch between the weather at your current location and the weather at your destination.

You’re probably considering that the weather at your destination doesn’t matter when you’re three hours away - but that’s all taken into account by the trip planner. It will add in both charge time and travel time and show you the weather at your destination at your expected arrival time.

And if the weather is drastically different or inclement, such as rain or snow, while you’ve got sunshine and rainbows - the weather will be shown above the destination ETA for a few moments before it tucks itself away.

Tesla also recently introduced a new voice command. Asking, “What’s the weather?” or something similar will now bring up Tesla’s weather popup.

The weather pop-up above the ETA

Not a Tesla App

One limitation, though—if you’re planning a long road trip that is more than a day of driving, the weather at destination feature won’t be available until you get closer.

Weather Radar Overlay

As part of the improvements to weather, Tesla has also added a radar overlay for precipitation. You can access the new radar overlay by tapping the map and then tapping the weather icon on the right side of the map. It’ll bring up a radar overlay centered on your vehicle. It’ll animate through the radar data over the last 3 hours so that you can see the direction of the storm, but you can also pause it at any point.

You’re able to scroll around in this view and see the weather anywhere, even if you zoom out. It also works while you’re driving, although it can be a little confusing if you’re trying to pay attention to the navigation system. If you like to have Points of Interest enabled on your map, the weather overlay will hide POIs except for Charging POIs.

Requirements / Data

Unfortunately, you’ll need Premium Connectivity for any of the weather features to work, and being on WiFi or using a hotspot will not be enough to get the data to show up. The data, including the weather radar, is provided by The Weather Channel.

As for supported models, weather and weather at destination are available on all vehicles except for the 2012-2020 Model S and Model X. The weather radar has more strict requirements and requires the newer AMD Ryzen-powered infotainment center available on the 2021+ Model S and Model X and more recent Model 3 and Model Y vehicles.

Follow

Follow

Follow