Tesla Installs Special Edition, Ultra Red Supercharger As It Reaches 50,000th Mark

By Kevin Armstrong
Tesla creates a special 50,000th Supercharger
Tesla creates a special 50,000th Supercharger
Not a Tesla App

Over the past couple of days, Tesla hit not one but two remarkable milestones, marking a significant chapter in its rapidly evolving story. If you spent the weekend engrossed in the new Elon Musk biography by Walter Isaacson, you can perhaps fully appreciate the magnitude of these accomplishments: the production of Tesla’s five millionth car and the installation of its 50,000th Supercharger.

Five Million Vehicles Strong

On its official Weibo account, Tesla unveiled its five millionth vehicle, a pearl white Model 3, freshly rolled off the production line at the Shanghai Gigafactory. This notable milestone embodies Tesla's journey “from a blank canvas to today’s five millionth vehicle,” a path characterized by simplicity and efficiency. Through their message, Tesla conveyed deep gratitude towards their global community of owners and supporters, urging everyone to "power up together" for a greener and brighter future. This celebratory announcement follows a series of production landmarks, the most recent being the four million car milestone reached in March, highlighting the company's exponential growth.

50,000 Superchargers: Painting the World Ultra Red

The weekend's festivities extended beyond the production line, with Tesla celebrating a Supercharger network milestone: the 50,000th installation. The Tesla Owners of Silicon Valley shared a video (below) showcasing Tesla's latest landmark in action. This special unit, distinctly colored Ultra Red, is located at Living Spaces at 1851 Freedom Way, Roseville, California. Since introducing just six Superchargers in 2012, Tesla has demonstrated its commitment to facilitating widespread electric vehicle use.

The Supercharger network, a pillar in Tesla's strategy to foster electric vehicle adoption, offers convenient and rapid charging solutions worldwide. This recent installation is a firm pledge to a global ethos where electric vehicles (EVs) can flourish.

Factory Tours for Referrals

Tesla is not only escalating its production but also opening doors for enthusiasts to witness where the magic happens. Tesla is introducing tram tours of its factories in Fremont, California, and Austin, Texas, as a part of its referral program. This exclusive peek can be redeemed using referral credits, ushering Tesla account holders and up to three guests into the production sanctuaries that have revolutionized the automotive industry.

However, while the immersion into Tesla’s world is facilitated, travel and accommodation expenses are the responsibility of the attendees. The company maintains a stringent no-media policy during the tours, underscoring the confidentiality preserved in these powerhouse spaces. Tesla aims to bolster engagement with its customer base through this initiative, enticing them with an insider’s view while encouraging more referrals despite moving away from the previous tradition of complimentary Fremont factory tours.

The electric vehicle pioneer isn't slowing down as Tesla gears up for an exciting future with the much-anticipated Cybertruck launch, which already boasts over 2 million unofficial pre-orders. Analysts anticipate that the existing production pace could potentially herald the creation of six million Tesla vehicles in early 2024.

Tesla Discusses HW3 Upgrade and Its Next-Gen AI5 FSD Computer

By Karan Singh
Not a Tesla App

The Q2 2025 Earnings Call provided us with a lot of information - and much of it related to FSD. There’s a lot of major news to unpack that impacts HW3 owners, AI4 owners, and future purchasers waiting for AI5.

Tesla addressed the previously promised upgrade for HW3 owners, talked about HW4 and also gave us dates of when to expect HW5 (AI5) and beyond.

The HW3 Upgrade

One of the biggest updates from the call was the clarification on the promised hardware upgrade for millions of owners with HW3 (AI3) vehicles. For those hoping for a path to the newer AI4 or future AI5 FSD computer, Tesla has confirmed that this upgrade is on hold until they can solve autonomy.

As we talked about in our HW3 upgrade article, Tesla will not consider offering such a complex and costly upgrade until after FSD Unsupervised is solved and becomes available to customer vehicles. The reasoning is that an upgrade could potentially involve more than just a simple computer swap, potentially requiring changes to other core vehicle components.

The key here is that the power and cooling requirements for HW4 hardware are far greater than those available in HW3 vehicles. If this trend continues with AI5, Tesla will need to build a customized solution for HW3 upgrades that falls somewhere in the middle - capable enough to perform FSD Unsupervised, but still able to fit within the required tolerances.

Camera Upgrades Might Be Needed

In addition, while Tesla has stated that they don’t intend to swap the cameras, this may become a requirement for two reasons. HW3 already has considerable difficulty reading signs, and HW4 is marginally better at doing so. Complex signs, such as “No Right Turn on Red,” could indicate that HW3 vehicles may require a camera upgrade, at least for the primary cameras, if not the side repeaters, bi-pillar, and rear cameras, to comply.

These changes will also require extensive rewiring, as the wiring in HW3 vehicles is not capable of the higher bandwidth required for higher-res cameras. The lack of future-proofing for HW3 vehicles is definitely becoming apparent here.

The second reason is the inclusion of the forward bumper camera on more of Tesla’s fleet. Today, every new vehicle except the Model 3 comes with a bumper camera. While Tesla does not use it for FSD yet, we believe that it will be necessary for low-speed maneuvers in crowded locations and parking lots - the key to making Summon and Banish truly autonomous.

Essentially, for the foreseeable future, HW3 vehicles will continue to be developed on a lagging, separate FSD software branch. Tesla intends to release updates for HW4 vehicles first, then take the time to optimize them, and then release updates for HW3 vehicles once they are ready. Realistically, while HW3 vehicles will still receive FSD updates, it seems that they have reached their physical operational limits and will not achieve the same performance or have all the same features as AI4 or future AI5 vehicles.

HW4’s Unsupervised Capabilities

The earnings call yesterday reinforced the capability of the current-generation HW4 hardware, which is included in all new Tesla vehicles. This is the same hardware that is powering the current Robotaxi FSD fleet that is currently operating and expanding in Austin. This confirms that HW4 is fully capable of supporting a true, driverless experience.

The question going forward will be what the limits of HW4 are, and how soon Tesla is approaching them. Will Tesla provide a smoother path to upgrade HW4 to AI5?

Given the ongoing situation with HW3, we don’t expect that they will. Tesla is contractually bound to provide Unsupervised FSD (autonomy) with the purchase of FSD, but it’s not required to upgrade vehicles so that they can achieve a higher level of safety and comfort. As long as a vehicle is capable of autonomy, then Tesla has met their commitment.

At this point, we don’t expect a clean upgrade path to AI5 - Elon has previously mentioned that it will consume nearly 2-3x the energy of AI4, which means an entirely new electrical and cooling package will be required for AI5, which AI4 vehicles won’t be able to easily support, short of a major retrofit.

However, if you want Unsupervised FSD and are satisfied with not getting a potential upgrade in the future, AI4 is a very compelling choice today. It is already demonstrably capable of Unsupervised FSD, which means you’re getting a vehicle that can and will do autonomy in the future.

If you’re still undecided about a purchase, a 48-month lease could be the most sensible option. Tesla is not intending to introduce AI5 until the end of 2026, and it will likely take months or years for the software divergence between HW4 and AI5 to occur.

AI5 is a Performance Jump; AI6 is a Leap

Tesla also provided the first concrete details on its next-generation FSD hardware, which will be known as AI5. The new computer is projected to be 3 to 5 times more capable than the already powerful HW4 hardware. That’s a massive leap in processing power, which will enable more complex neural networks and faster, more human-like decision-making.

This next-generation hardware isn’t expected to reach mass production until at least the end of 2026 - and the first vehicles receiving it will likely be Tesla’s Cybercab.

Going forward, Tesla intends to use AI6 as a means to closely integrate the training hardware and the vehicle hardware. That means that its Dojo supercomputer chip will live in AI6 vehicles. Two chips in a vehicle or on board an Optimus humanoid robot, while hundreds will live in a training cluster.

Tesla already uses HW4 hardware in Cortex, its Supercompute training cluster at Giga Texas. However, the vast majority of the training hardware is built around Nvidia’s H200 chip, which means Tesla needs to build the training software for the H200, then rebuild the trained models for HW4 hardware.

This change to Dojo training compute and Dojo in-vehicle compute means that Tesla will be able to further optimize the process, simplifying the entire training pipeline.

Closing One Door, Opening Another

The Q2 call was filled with interesting facts that drew solid lines in the sand for what Tesla’s future hardware path will look like. For owners of HW3 vehicles, the path to next-generation hardware is on hold, but at least there’s some clarity.

However, Tesla is offering FSD transfers in many regions worldwide, including North America and Europe, as a way to upgrade customers to newer vehicles equipped with hardware capable of running the latest FSD version.

For current HW4 owners, their vehicles are already equipped with the hardware capable of running in an Unsupervised future, and can look forward to support for at least another few years. In the future, Tesla vehicles will be equipped with even more powerful hardware, including AI5 in late 2026 or early 2027, and AI6 several years later.

If you missed any part of Tesla’s earnings call and its Q&A session, be sure to check out our recap, where we cover everything Tesla talked about, including FSD Unsupervised, the Robotaxi, and much more.

Tesla Launches New Frunk LED Light Strip for Model 3 and Model Y

By Karan Singh
Not a Tesla App

Tesla has released an official LED light strip upgrade for the frunk of the Model 3 and Model Y in the U.S. and Canada. The light strip, priced at $100 USD ($130 CAD), is a great addition to light up one of the most useful storage areas of an EV.

According to Tesla, the new light strip is designed for easy installation by the customer. The light strip connects directly to the vehicle’s power supply using an included adapter, eliminating the need for batteries or wiring harnesses. That makes this a clean OEM setup without the hassle of needing a separate power source.

The light is built to last, and is equipped with a constant current control module and an IP67 dustproof and waterproof rating on both the light itself as well as the adapter, so you don’t need to worry about it getting wet in the rain if you happen to leave your frunk open.

Not a Tesla App

Vehicle Compatibility

The new frunk light strip is available for all Model 3 and Model Y vehicles from model years 2020 to 2024, so it does exclude earlier Model 3s.

For newer vehicles, a revised version of the light strip is being developed, compatible with the updated wiring harness of 2025 and 2026 Model 3 and Model Y vehicles.

The revised version is already available on Tesla’s shop in China, which means its release in North America is likely not too far away.

Sign of More to Come?

This isn’t the first time Tesla has made an OEM version of a popular third-party accessory, such as the custom puddle lights. Another popular third-party accessory is a powered frunk add-on.

Currently, the Cybertruck is the only Tesla vehicle with a powered frunk, and getting an official modification that won’t risk denting your hood would be amazing to see. It would also greatly improve the utility of the frunk, as many people avoid opening it since it has to be manually closed.

This new accessory is a welcome addition to the lineup of accessories for owners looking for a simple and high-quality add-on for their Tesla and and we’re hoping to see more of this in the future.

You can purchase it at the link here.

Latest Tesla Update

Confirmed by Elon

Take a look at features that Elon Musk has said will be coming soon.

More Tesla News

Tesla Videos

Latest Tesla Update

Confirmed by Elon

Take a look at features that Elon Musk has said will be coming soon.

Subscribe

Subscribe to our weekly newsletter