The Tesla Key Card is the company’s answer to the pain of the traditional car key. The pocket-sized card is designed to be a backup method to your Phone Key or key fob, which are the preferred method to lock and unlock your car.
The cards are durable, waterproof, require no batteries, cheap to replace (only $35 for two, where a normal key may cost upwards of $300 to replace and reprogram), and make it easy to revoke access in the event a keycard is lost or stolen. The same goes for Tesla key fobs, which are an optional extra for Model 3 or Model Y, but come standard with Model S or Model X.
The Tesla Key Card is compatible with all Model 3 and Y vehicles, and the refreshed 2021+ Model S and X.
Use Android Phone as Key Card
You can use your phone as a key card via NFC! The feature is enabled by default when you add your device as a phone key, so make sure NFC is on, and try it out! Tap your phone on the b-pillar to unlock/lock the car. If this doesn’t work, go to the contactless payment settings on your device and make sure “Tesla” is enabled as a contactless payment method.
You can use an Android phone as a Key Card to open your Tesla
How to use the Tesla Key Card
Remove the key card from your pocket, wallet, etc. The key card may not be recognized while inside a wallet, due to interference from other contactless cards.
Place the card flat against the b-pillar (between the front and rear doors), just a few inches below the camera hidden behind the glass.
You’ll hear a single chirp from the vehicle to indicate it’s unlocked (if you have the feature enabled, otherwise the lights will flash to indicate it’s unlocked). Remove the key from the car, enter the vehicle, and you’re good to go!
If more than approx. 30 seconds passes between unlocking the car and placing your foot on the brake, a message will pop up on the screen to indicate you need to tap the key again to be able to drive. The screen will show a graphic demonstrating how and where to place the card - this varies between different vehicle models, so follow the on-screen instructions for your specific vehicle.
How to Add a New Key Card
Note: You will need an existing key to add a new card. Enter your vehicle and open the Car menu on the screen. Navigate to the Locks section, and press the button to add a new keycard.
Follow the on-screen instructions to set up the new card - these instructions vary between vehicle models.
How to Remove a Key Card If Lost or Stolen
If you have lost a key card or wish to prevent a key card from accessing your vehicle, you can revoke access. To do so, enter your vehicle and open the Car menu on the screen. Navigate to the Locks section, and press the trash can icon next to the key card you wish to remove.
Follow the on-screen instructions. If you’re unsure which key card is the right one, this trick might be able to help - any time you tap a key card against the center console (3/Y) or wireless charging pad (2021 S/X), it will identify itself from the list on screen.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
In a world first, Tesla has successfully completed its first fully autonomous delivery of a new vehicle from Gigafactory Texas to a customer’s home. While Musk announced this was coming, some of the details make the achievement even more impressive.
The first fully autonomous delivery of a Tesla Model Y from factory to a customer home across town, including highways, was just completed a day ahead of schedule!!
Congratulations to the @Tesla_AI teams, both software & AI chip design!
A Tesla Model Y left the factory, navigating highways at speeds up to 72mph, a day ahead of Tesla’s previously announced schedule. Most critically, Elon also confirmed two key factors that make this achievement even more impressive than Tesla’s launch of the Robotaxi last week.
There were no Safety Monitors in the car, and no remote operators took control of the Model Y at any time, really making this an amazing achievement.
While the launch of the Robotaxi was an amazing step for Tesla, this one easily takes the cake.
No Safety Monitor, No Passengers, No Limits
The significance of this event lies in just how it differs from the current Robotaxi service operating in Austin.
First and most importantly, there was no Safety Monitor. Nobody was sitting up front, ready to tap one of the emergency stop buttons on the screen. The vehicle was empty, fresh from the factory. This is the unsupervised experience and future that we’ve been waiting for.
Max speed was 72 mph -- Ashok Elluswamy
Why There Was No Safety Monitor
However, there is an important distinction with this autonomous ride — that there were no passengers. This is the crucial regulatory distinction. By operating as a logistics trip rather than as a commercial ride-hailing service, Tesla was likely able to bypass many of the stringent rules governing passenger transport.
This freedom is what enabled the other key difference: operating with fewer restrictions. That included a 72mph top speed on the highway, which is well outside the geofenced Robotaxi Network that’s currently available in Austin.
This event wasn’t a surprise - Elon had previously stated that Tesla expects the first fully autonomous delivery to happen on June 28th. He even worked some flex time into that, saying the timing could potentially slip into early July.
It turns out that additional time wasn’t needed, as Tesla ended up delivering its first vehicle a day early. It seems that Tesla is pulling data quickly from its fleet of slightly modified Model Ys cruising the streets of Austin, which likely enabled the confidence behind giving this the green light.
Video of the Drive
Tesla shared a video of the entire drive, from the vehicle leaving Giga Texas to it arriving at the customer’s home. The entire ride took 30 minutes, crossing parking lots and going on the highway.
This Tesla drove itself from Gigafactory Texas to its new owner's home ~30min away — crossing parking lots, highways & the city to reach its new owner pic.twitter.com/WFSIaEU6Oq
This successful delivery is another fantastic use case for FSD that could be another entire business in and of itself for Tesla. The ability to autonomously move vehicles, potentially with cargo inside them, has massive implications for both Tesla’s factory-to-customer logistics, as well as challenging other services like Uber Eats and Skip the Dishes down the road.
Additionally, logistics-focused autonomy may be easier to scale than the Robotaxi network. It sidesteps many of the complex safety, liability, and customer-facing service challenges that come with carrying human passengers. This could be a faster and clearer path for regulatory approval.
Fork in the Road
But it's more than just a new business.
Back in 2022, Elon commissioned an art piece that now stands outside Giga Texas. It is, quite literally, A Fork in the Road. Part of Elon’s greater goal is to ensure we pass Fermi’s Great Filters, and that means ensuring we generate green energy, electrify and automate transportation, and move towards sustainable abundance.
Two years ago, I commissioned an art piece: A Fork in the Road.
Had to make sure that civilization took the path most likely to pass the Fermi Great Filters. pic.twitter.com/mYFzdAy6WF
The point of the fork here is that Tesla’s first autonomous delivery isn’t just a publicity stunt. We’re finally here, at the fork in the road. We’ve hit it - true autonomous capabilities being demonstrated on public highways under a specific and challenging set of conditions. That’s a true Level 4 autonomous capability with no one in the car.
While Robotaxi is a fantastic step towards changing personal transport, this successful delivery proves that there are even more uses to FSD beyond what we’ve seen so far.
Tesla has issued a new, voluntary safety recall for a small batch of Model 3 and Model Y vehicles due to an issue with improperly tightened fasteners in the first-row seats.
The recall impacts only about 48 vehicles and will require a Tesla service visit to resolve.
Improperly Tightened Fasteners
According to the recall notice, the issue stems from the first-row seating that may have been manufactured with improperly torqued fasteners that attach the seat back to the seat bottom. In some cases, the fasteners may be loose or missing, which could cause a rattle or the seat to detach.
This is a critical safety issue, as a seat back that is not properly anchored could detach, leaving the driver or passenger unsupported and increasing the risk of an accident.
According to Tesla’s investigation, this issue originated from a production change made for vehicles manufactured between April 3rd and May 7th of 2025. However, not all vehicles built within that date are impacted by the recall. The issue impacts 30 2026 Model Ys and 18 2025 Model 3s, across all variants, including RWD, AWD, and Performance (for the Model 3).
Thankfully, there have been no incidents related to this issue to date.
The Fix
Since this is a physical recall, Tesla will have to inspect impacted vehicles and replace and properly retorque the seat fasteners as needed, free of charge.
Owners of vehicles who have been impacted have already been contacted under the voluntary recall, and most vehicles should have been repaired by the time this notice is formally issued.
You can also check if your VIN is impacted by a recall using Tesla’s Recall Tool.
Tesla has noted the repair should take approximately one hour of work at a Service Center, and up to two hours if a Mobile Ranger addresses the recall.