The inside of a car can get extremely hot in summer months. It doesn’t take much before the temperature inside of a vehicle becomes dangerous. For you, your loved ones or your little furry friends.
Tesla's Dog Mode screen
Not a Tesla App
Sometimes you may find yourself in a situation where you have a pet with you, but you need to run to a store. Even with your windows cracked, it’s a bad idea to leave your pet in the car on warmer or cold days.
Introducing Dog Mode
Tesla solves this problem with Dog Mode. Since Teslas are electric, there’s no engine that needs to run, meaning you can run any system in the car without needing the car to remain on. This includes the heater and air conditioner.
Dog Mode allows you to set the temperature in the car, just like you’d set it at home, and the car will keep the interior of the vehicle at that temperature until you return. It doesn’t matter whether the cabin needs to be heated or cooled, the car will control the HVAC to keep the vehicle at the selected temperature.
Letting Others Know Your Pet is Safe
Since leaving your pet alone in a vehicle isn’t normally a good idea and people may not be familiar with Tesla’s Dog Mode, Tesla also displays a message on the screen.
Tesla does a great job at letting bystanders know that your pet is safe inside of the car. Once Dog Mode is activated, a message will display on the car’s large center screen letting people know your pet is safe.
The screen will show a cute picture of a dog and display a message that states, “My driver will be back soon.” It will furthermore let them know to not worry, and that the heater or AC is on and it will display the current temperature inside of the car.
What Happens If the Battery Gets Low
The car will only let you activate Dog Mode if your charge level is above 20%. This is to be sure that there’s enough of a charge to keep your pet cool or warm and a buffer for you to get home.
If you have enabled Dog Mode and the battery reaches 20%, Tesla will send you a notification on your phone letting you know that the battery is getting low and that you should return to your car.
Dog Mode will remain on as long as possible until the car runs out of battery.
How Long Can You Leave Dog Mode On
The heater or air conditioner is getting power directly from your car’s battery. Besides driving, climate control is one of the largest draws of power. The amount of power actually consumed, or the amount of time your car can remain in Dog Mode is entirely dependent on the outdoor temperature and how much energy the car needs to use to keep the cabin at the selected temperature.
A rough estimate is that your car will use about 4 miles of range per hour in which the climate system is on. This will differ based on whether you’re using the heater or AC, your Tesla model and the outside temperature.
Which Models have Dog Mode
Dog Mode is a standard feature available in Tesla Model Y, Model 3, Model S and Model X. You do not need to have Tesla’s Premium Connectivity in order to receive notifications from your Tesla or to control your Tesla from the Tesla app.
How to Turn On Dog Mode
To activate Dog Mode you’ll need to be inside of the vehicle. Tap on the fan icon along the bottom navigation bar and you should see the HVAC screen come up. Toward the top right corner, you’ll see different modes, such as On, Dog and Camp.
Touching Dog Mode will activate it as soon as you leave the car. Just set your temperature and you’re all set.
How to Turn Off Dog Mode
Once you get back in the car and start driving, Dog Mode will automatically turn off. If you come back for just a minute and leave again, Dog Mode will remain on.
Dog Mode is a fantastic feature and shows a clear benefit of electric cars, where you don’t need to have the engine on in order to power the HVAC system. Please use it with caution and don’t leave your dog or pet unattended for long periods of time.
As anticipation builds for Tesla’s Robotaxi network debut in Austin, potentially just a few short weeks away, the National Highway Traffic Safety Administration (NHTSA) is turning its official eye onto Tesla. The ask? How will Tesla’s FSD handle the unpredictable realities of challenging weather?
The NHTSA Request
The NHTSA has sent a formal letter to Tesla, which was made public on May 12th, requesting detailed information about Tesla’s Robotaxi service. The NHTSA inquiry centers specifically on the safety and performance of FSD when faced with reduced visibility conditions like rain, fog, and sun glare. The request is tied to an ongoing NHTSA investigation, which was initiated in October 2023, examining Tesla’s FSD and Autopilot suite following incidents in poor visibility.
Tesla’s executives, including Elon Musk, have previously stated that the company is full steam ahead to launch Robotaxi in Austin this June. However, NHTSA’s pointed questions come even as Tesla has recently discussed its plans to work on region-specific and weather-specific FSD training.
Tesla’s executive leadership acknowledged the need to adapt the system to diverse environmental and weather conditions. Now, regulators want specifics on how Tesla intends to address environmental conditions and how that translates to operational safety for the fleet.
Request Breakdown
NHTSA’s letter outlines a need for detailed information from Tesla before the service launches and covers several key areas. We’ve broken this down into various sections below:
Deployment Scale
NHTSA is looking for the exact number of vehicles and models that will be part of the initial Austin fleet, and what the projected service availability times would be for said fleet. Tesla has previously said it’d launch with 10-20 Model Ys, but looks like NHTSA is looking for additional details.
Oversight
In terms of oversight, NHTSA is looking to confirm whether the Robotaxis will operate under real-time supervision of Tesla’s employees, either remotely or in-vehicle.
This is a question on our minds as well. A recent app update suggested that Tesla could have a driver in the vehicle, but it wasn’t clear whether this was referring to Tesla’s own fleet or customer-owned vehicles. The only thing we have heard officially from Tesla is that Tesla “may” use remote support, but that they were still looking into it.
Adverse Weather Capabilities
This is the meat and potatoes of the request - how will Tesla ensure safety during sun glare, fog, heavy rain, snow, or dust? What specific protocols are triggered if poor visibility is encountered mid-trip? Will the vehicle pull over or call home and cancel rides?
Sensor Technology
Surprisingly, NHTSA is looking for details regarding the vehicle the Robotaxi sensor suites and how Tesla intends to use those sensors to ensure safe operation under varied conditions. NHTSA has had previous submissions from Tesla in regard to its sensor suite and how it uses the technology, so it feels odd that they are requesting another batch - but this could be related to the use of the next generation of FSD (Unsupervised).
Compliance
Does Tesla’s FSD system adhere, either fully or partially, to established industry standards for autonomous driving? This likely refers to the NHTSA Automated Vehicles for Safety guidebook, which lays out the “L0 to L5” driver assistance vs automation system.
Future Expansion
Finally, NHTSA is looking for the timeline for enabling Robotaxi functionality on vehicles not directly owned or controlled by Tesla. Tesla has already come out and said that customer-owned vehicles wouldn’t be allowed on the robotaxi network until 2026, but obviously, NHTSA wants to hear directly from Tesla and likely has more specific questions covering a wide variety of potential issues.
These questions will likely have to be answered with considerable amounts of data and justification for the NHTSA. Once all that is done, Tesla will be in a better position to receive regulatory approval at a larger scale than just within the city of Austin or the state of Texa with the NHTSA’s backing.
Successfully addressing this letter will be the key for Unsupervised FSD moving forward, but Tesla hasn’t issued a public response to the agency’s letter, and likely won’t in a public manner. So we’ll have to wait and see how the launch of the Robotaxi network pans out next month.
After an 84-day wait since the last FSD update, Tesla has finally begun rolling out a new version of FSD V13 to its AI4-equipped vehicles. This new release, V13.2.9, is rolling out to all vehicles, including the Cybertruck.
Unfortunately, since it’s a minor point release (from V13.2.8), the release notes are the same, and Tesla hasn’t included a change log or changed what’s coming in the future.
Software Update 2025.14.6
The FSD update is rolling out with Tesla software update 2025.14.6. Interestingly, update 2025.14.6 is seeing a wider distribution and is also being made available to vehicles without FSD and outside North America. For those vehicles, this update just includes bug fixes.
TCU Fix
There’s one fix in particular that’s expected to be included in this update, according to a message from Tesla Service. In earlier 2025.14 updates, there was a bug in some vehicles that prevented some vehicles from falling asleep properly due to a Telematics Control Unit (TCU) issue. This bug caused additional battery drain since some of the vehicle’s systems remained on.
Tesla Service said they planned to include a bug fix in update 2025.14.6, but it hasn’t been confirmed whether the fix actually made it out in this release.
Early Access Users and More
FSD v13.2.9 was first rolled out to Tesla’s standard Early Access group, including well-known community members and content creators. It has also reached participants in the newer, Texas-based Early Access Program, suggesting that the update is relatively stable and may serve as a foundation for upcoming FSD releases.
Tesla could be intending to use the Texas Early Access Program to test various features, perhaps related to the upcoming Robotaxi network launch in Austin. While this is plausible, it is merely speculation, and we’ll be keeping a close eye on that group to see what exactly Tesla does.
HW3 Users
While Tesla has recently been including FSD updates for HW3 and HW4 in the same release, this update does not include any changes for HW3 users. HW3 vehicles that are receiving this update are staying on FSD V12.6.4, which means that whichever fixes this update includes they’re specific to FSD V13 or HW4.
Point Release - Not Much New
Being a point release, V13.2.9 isn’t expected to introduce any major new capabilities. Tesla hasn’t provided specific release notes detailing changes from V13.2.8.
Hopefully, Tesla has taken into account recent user feedback on V13.2.8 about lane centering and lane selection, and this update addresses some of those issues. However, early feedback is that those issues are still present.
There is always potential for a more substantial update in the near future, so keep your fingers crossed, but after such a long wait, we expected more to be included. It seems like Tesla may have felt the need to address a bug in this release instead of waiting for the next major release, which is expected to either be FSD V13.3 or FSD V14.
The fact that Software Update 2025.14.6 is going out wider than the Early Access audience suggests that Tesla is confident in this release and that it likely only includes very minor changes. We expect this update to continue going out over the coming days.
![Tesla Updates Lane Departure Avoidance, Likely Now Using FSD Stack [Video]](https://www.notateslaapp.com/img/containers/article_images/tesla-screen/lane-departure-warning.webp/bac626b9acadf88ee44775c5ee187c06/lane-departure-warning.jpg)
![Exclusive: A Look Inside the Tesla Diner [PHOTOS]](https://www.notateslaapp.com/img/containers/article_images/2025/diner-seats.jpg/b0b4cb51b80d1f29298c9ca6b9ad2ae8/diner-seats.jpg)
_300w.png)
