According to Chinese blog posts from earlier last week, now vetted by Reuters, Tesla intends to produce a cut-down version of the Model Y, initially for the Chinese market, sometime in 2026.
This follows the launch of Tesla’s cut-down Model 3 for Mexico, as well as news that Tesla intends to launch their new next-gen model sometime in the near future.
Cut Down, But How?
The new Model Y, internally referred to as Project E41, is designed to lower the entry price of Tesla’s popular SUV—one of the most compelling options on the market due to its size, range, and versatility, especially following the launch of the refreshed Model Y.
To achieve this, Tesla is reportedly aiming to reduce the Model Y’s total cost by nearly 20%, according to reports from China. While exact changes remain unknown, we can make informed guesses based on the cost-saving measures Tesla implemented in the scaled-down Model 3 for Mexico.
Textile Seats and Trim
One of the most noticeable changes in the cost-cut version of the Model 3 in Mexico was the removal of vegan leather throughout the interior. In its place, Tesla opted for a durable textile fabric for the seats, reducing material costs. Additionally, any Alcantara trim pieces were replaced with the same textile in various areas.
No Heated or Cooled Seats
Another major cost-cutting measure was the removal of heated and cooled seats, along with the heated steering wheel. While these feature reductions may seem minor, eliminating them reduces various things, such as electrical components, harnesses, and ductwork that are required for seat ventilation.
No Rear Screen
One of the more unexpected changes in the reduced-cost Model 3 was the removal of the rear screen, despite it being powered by the same front infotainment computer as the front display. Given that the screen functions primarily as an additional display rather than a standalone system, the cost to include it is extremely low. It’s one of those really smart additions Tesla has added that increases value for the consumer with minimal cost to Tesla.
Tesla is unlikely to redesign or modify the vehicle’s wiring harness for this change, meaning a rear screen could potentially be retrofitted later by the customer. Based on replacement part estimates, the screen likely costs Tesla between $5 and $20 per vehicle, which acts as a secondary monitor for the infotainment computer.
Interestingly, new Tesla hardware was recently found by Greentheonly. While the computer has inputs for a front bumper camera, it lacks the output for a secondary screen, meaning that it could be suited for this upcoming cheaper Model Y.
Ambient Lighting, Acoustic Glass, Speakers
The final set of changes also focuses on the interior. Tesla replaced the RGB-capable ambient lighting with a simpler white-only version—likely saving only a few dollars per vehicle. While this may seem like a minor and somewhat unexpected cut, it could serve as an upsell opportunity to the standard RWD variant.
Additionally, Tesla reduced the use of dual-pane acoustic glass, now limiting it to just the front windows and windshield. This change drastically cuts costs but also affects cabin noise levels. The dual-pane glass played a key role in making the refreshed Model Y noticeably quieter, so this downgrade will likely bring noise insulation closer to that of the original Model Y.
As for audio, Tesla scaled down the speaker system in the Mexican Model 3 from 17 speakers to just nine, while also removing the subwoofers and one of the audio amplifiers. While this cuts costs due to wiring and speakers, it also has a large impact on the audio quality in the vehicle.
Project E41 is Not the Next-Gen Model
It’s important to note that Project E41 is not the same as the upcoming, more affordable next-gen platform, which is internally referred to as Project Redwood. While Project E41 focuses on a reduced-cost version of the Model Y, Project Redwood is designed to test Tesla’s manufacturing capabilities, using their innovative unboxed assembly method to reduce both costs and production time. The goal is to create a vehicle that is smaller and more affordable, while also keeping it safe and capable of self-driving.
Tesla previously confirmed that they plan to unveil new models—distinct from cut-down versions of the Model 3 or Model Y—during their Q4 2024 Earnings Call. However, the executive team has been careful not to divulge too many details about the upcoming model during interviews. This suggests there may be a lot more that has yet to be unveiled.
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
Tesla has unveiled its 6-seat Model Y variant in China, known as the Model Y L. This new variant of one of the world’s best-selling vehicles comes with a longer wheelbase, adjusted C-pillar design, and most importantly, a six-seat interior layout.
The vehicle’s specifications have been officially listed in a filing with China’s Ministry of Industry and Information Technology (MIIT), confirming a launch for this fall.
Not a Tesla App
The addition of a longer wheelbase and a more spacious third row is a fantastic addition for the Model Y’s family utility, and positions this variant as sort of a mini Model X, but let’s compare the sizes to really know how this new Model Y compares to a Model X.
Meet the Model Y L
The defining feature of the new Model Y L is its six-seat configuration. This layout has previously been exclusive to the larger and more expensive Model X. While Tesla has offered the Model Y in a 7-seat configuration before, the third row was much too small to be utilized by anyone but small children.
Comparing Model Y L to the Model X
@xiaoteshushu on X
Let’s compare this upcoming Model Y L to the regular Model Y and the Model X.
Vehicle/Dimension
Wheelbase
Overall Length
Model Y
2,890mm / 113.8 in
4,797mm / 188.9 in
Model Y L
3,040mm / 119.7 in
4,976mm / 195.9 in
Model X
2,965mm / 116.7 in
5,060mm / 199.2 in
The new wheelbase of 3,040mm is a significant stretch from the standard wheelbase, and in fact, is longer than the Model X’s wheelbase of 2,965mm. However, the overall length of the vehicle is 84mm (~3 inches) shorter than the Model X. This means the vehicle sits neatly between the current Model Y and Model X, filling a much-needed gap.
While this Model Y L is slightly smaller than the Model X, it doesn’t necessarily mean that it’s smaller inside. The Model X features a much larger front end than the Model Y, accounting for several inches. When you line up the front wheel base of the Model X with this new Model Y, the vehicles are almost exactly the same length.
Tesla has designed this Model Y to be a bit more compact and efficient than the Model X, and likely much cheaper, while featuring the well-loved design of the new Model Y.
Other Specifications and Price
The MIIT filing also provided a detailed look at some additional specifications. The Model Y L is a dual-motor, AWD variant, so it will likely be more expensive than the current Model Y AWD that’s available in China today. Tesla charges an additional $6,500 USD when upgrading the Model X from a 5-seat configuration to a 6-seat layout, so we may see something similar here.
The extra length has been added behind the C-pillar, resulting in a longer rear profile for the Model Y L. To accompany this, Tesla has added an updated rear spoiler, similar to the one found on Performance variants, but not carbon fiber. There is also a new wheel design to complement the updated look, along with unique Model Y L badging and a new light gold paint option.
In classic Tesla fashion, no Tesla is slow - and the Y L has a 0-100 km/h (0-60mph) time of 5.9s, with a top speed of 217km/h. Alongside an 82.5 kWh LFP battery pack, the Model Y L boasts an impressive CLTC range of 688 km (427 mi).
Not a Tesla App
Launch & Availability
According to posts from Tesla China on Chinese social media, the new Model Y L is scheduled to launch in the fall of 2025. Its official listing in the MIIT database is essentially the final regulatory step required before sales can begin, which means the launch is really just around the corner. For now, it appears that Tesla intends to launch this vehicle only in China, as no other filings have been made in other regions. However, these could be revealed in the coming months.
The new Model Y L is a huge addition to Tesla’s lineup - one that addresses the Chinese preference for vehicles with longer wheelbases and additional passenger room in a compact SUV package. The question is - will this variant make its way to North America and Europe?
Solving real-world artificial intelligence - whether for autonomous driving, real-world robotics, or advanced reasoning - requires an almost unfathomable amount of computational power. To meet this challenge, Tesla has been developing its own custom AI training hardware while simultaneously purchasing hardware in the open market.
Now, the next-generation Dojo 2 chip has reportedly entered mass production with the world’s largest semiconductor manufacturer, TSMC. While many may consider this a side quest, expanding Tesla’s computing base will be necessary to achieve exascale supercomputing, which will be crucial for all of Tesla’s AI ambitions.
Elon Musk called Dojo 2 “a good computer,” and then followed up with a classic computer performance joke - Dojo 2 can indeed play Crysis at a billion frames per second.
While Tesla has effectively utilized powerful third-party GPUs to train its models to date, the Dojo supercomputer is a ground-up, application-specific solution designed for a single purpose. It will efficiently process massive amounts of video data for training neural networks. The Dojo 2 chip itself is the key that unlocks this potential.
Dojo 2 will train the vision-based neural nets that FSD relies on, allowing Tesla to process video from its massive global fleet of vehicles even faster. As Tesla continues to improve FSD, one of the biggest challenges has been the intake of video for handling difficult edge cases.
Hundreds of thousands of miles of training data may pass by before an edge case is identified and trained on, but it all needs to be analyzed, labeled, and processed, which is key for Dojo 2. Each new useful piece of training data will help Tesla proceed down the march of 9s, making FSD just that little bit better every time.
This process requires massive amounts of compute and training time - but it is an absolute necessity to improve FSD. Of course, this goes beyond just FSD in vehicles. Tesla’s humanoid robot, Optimus, also runs on FSD to navigate and interact with the physical world.
While it may be a custom version of FSD, it remains FSD at its core, which means the same neural nets that analyze the environment and build a 3D map of the world for your car perform the same work for Optimus.
Not a Tesla App
Custom Approach to AI Hardware
Dojo 2’s power doesn’t just come from raw compute; it comes from a series of architectural choices that make it excel at training FSD and differentiate it from general-purpose hardware, or even other AI-specific hardware.
To this end, Tesla is using TSMC’s new Integrated Fan-Out with Silicon-on-Wafer (InFO-SoW) packaging technology. For massive AI workloads, heat and the speed at which data moves between chips are often the biggest bottlenecks.
This new packaging technique allows for high-bandwidth connections directly between processing dies, which lowers latency and dramatically improves heat dissipation, all key to building massive and dense compute clusters.
Unlike general-purpose chips, Dojo 2 is designed with a custom instruction set, specifically built to train FSD. The cores are specifically made to accelerate the exact mathematical operations, like matrix multiples and systolic arrays, which form the backbone of Tesla’s vision-based neural networks.
By building its own hardware, Tesla can then integrate its own software and compilers directly with the silicon, optimizing for specific workloads and avoiding the performance penalties that can result from using third-party software, such as Nvidia’s CUDA.
The start of Dojo 2 may seem like a side quest for some, but it’s actually a key step for Tesla’s AI technologies that give them an advantage over the competition using off-the-shelf hardware. They’ll need to continue investing in custom hardware to improve FSD at a reasonable pace, rather than the current glacial pace we’ve seen over the last few months.
![Tesla Software Update 2025.26: Grok, Light Sync, Audio Presets and More [VIDEO]](https://www.notateslaapp.com/img/containers/article_images/tesla-update/light-sync-update.jpeg/e84ab2f1fe12f493a75927db105a9586/light-sync-update.jpg)
