The updated Tesla app which we saw has now started becoming available to users. It looks to be rolling out first to iOS, but we expect an Android release to follow very soon (Update: Android version has started rolling out as well!).
What’s New
The app has been redesigned, but the core functionality and layout remain largely the same. There are a couple bigger functionality changes which we’ll start off with.
First, you’ll now be able to send commands to your car immediately, instead of having to wait until the car wakes up. The days of waiting for your vehicle to wake up before you can turn on the HVAC are gone.
The other big functionality change is just as nice if you have multiple Teslas. If you’re lucky enough to own more than one Tesla, you can now unlock any Tesla using your phone key. Previously, you could only unlock the vehicle that was selected in the app.
Other changes in the app are more subtle, but we’ll discuss them below.
You still have a rendering of the car at the very top, followed by some quick action buttons and some categories underneath that. However, the car renderings are now completely 3D and you’ll get fluid 3D transitions as you navigate the app and go into various menus. The battery icon at the top is now much smaller, gray and justified left.
Charging
The Charging section has been removed. Charging information will now be displayed only when your car is plugged in. Upon plugging in your Tesla, you’ll be presented with options to unlock the charge port and start charging. There’ll now be a nice animation of electricity running through the cable when your vehicle is charging. The time remaining, amperage and mi/hr are now displayed near the top of the app, below the battery icon.
A nice addition is that when picking your charge limit in percentage, you can now easily jump to round percentages, such as 70, 80, 90, etc. If your vehicle is charging, it’ll show you an estimate of how many miles it will charge up to.
You can now also view Supercharging history right within the app, instead of having to view it in the car or on Tesla’s website.
Controls
The Controls panel now features a large view of the car with buttons to open the frunk, trunk, charge port and unlock the vehicle. The speed limit, valet mode and sentry mode settings have been moved to a new category labeled Security. The Vent button has been moved to the Climate section.
Climate
In the Climate section things look very similar. You can now view the interior of the vehicle a little better and there’s a new fluid animation when the air vents are blowing. The exterior temperature is also displayed in addition to the interior temperature.
Upgrades
The upgrades section also received a facelift and now includes more information. There are now two sections, Software Upgrades, which feature the Buy and Subscribe sections we’re familiar with and a new Accessories section which offers Tesla accessories specific to your model.
Security
The new security section, in addition to having features that were previously available in other sections will also provide tips for how to improve your phone key experience. For example, if you have Bluetooth turned off, or location services for the app disabled, it’ll point out that unlocking your vehicle can be more reliable if you have those options enabled.
Widgets
With the introduction of the 4.0 release, Tesla has also released Widgets. For iOS there’s a 2x2 widget and a 4x2 widget. Both widget sizes feature the same information, which is the name of the car, battery percentage, location (or charging information), unlock status, an image of the vehicle and the time the information was last updated.
Overall, the app is much smoother and sleeker than the previous version. Some fonts are a little small such as the car information at the very bottom of the app, but this is a great update that we’re sure Tesla will continue to tweak and build upon.
Update:Elon has now confirmed that Bioweapon Defense Mode is coming to the Tesla app as well.
Tesla has issued a strong denial in response to a Wall Street Journal report (Paywall) which claimed that Tesla’s Board of Directors had initiated a search for a new CEO.
In a statement posted directly on Tesla’s X account, Board Chair Robyn Denholm denied the report unequivocally. As per the statement, Tesla’s board did not reach out to recruiting firms in search of a new CEO.
Earlier today, there was a media report erroneously claiming that the Tesla Board had contacted recruitment firms to initiate a CEO search at the company.
This is absolutely false (and this was communicated to the media before the report was published).
The statement reaffirmed the board’s position on Tesla’s current leadership and that the board is highly confident in Elon’s ability to continue executing Tesla’s plans and future growth.
This confidence behind Elon follows his recent statements made during the Q1 2025 Earnings Call that he would be stepping back from the Department of Government Efficiency (DOGE) in the coming days and significantly reducing time spent there. Instead, he would be returning to focus on Tesla’s operations and the upcoming deployment of Robotaxi.
Shortly after the denial was posted, Elon Musk also commented on the report, specifically tagging the Wall Street Journal and criticizing their handling of the report.
It is an EXTREMELY BAD BREACH OF ETHICS that the @WSJ would publish a DELIBERATELY FALSE ARTICLE and fail to include an unequivocal denial beforehand by the Tesla board of directors! https://t.co/9xdypLGg3c
We’re glad to see Tesla and Elon set the matter straight, but there could have been a better way to spread this message and maybe even prevent the report from WSJ from going out.
We recently published an opinion piece on why Tesla needs its PR team back, and this specific incident is a good example. Relying solely on platforms like X for critical corporate communications - and in this case, late at night (1 AM EST), with limited reach outside the existing follower base seems like an ineffective way of communicating important company information.
We’d love to see Tesla really put some thought into managing its image, as it seems that several recent reports from major financial news organizations have apparently been wrong.
Either way, the board’s stance is clear - there is no active search underway, and Elon has the full backing and support of the board to lead Tesla toward the future.
Tesla’s Megapack is rapidly becoming a key component in energy storage and grid modernization efforts worldwide. Though often associated with powering AI infrastructure or industrial operations, Megapack’s true strength lies in its ability to stabilize electrical grids during blackouts and brownouts.
In a recent behind-the-scenes reveal, Tesla showcased the impressive scale of Megapack production at its Mega Lathrop facility, along with real-world examples of how these systems are already transforming energy resilience across the globe.
Mega-Scale Megapack
Tesla is operating the largest utility-scale battery manufacturing facility in North America at Mega Lathrop, which has the capacity to produce 10,000 Megapacks annually. Thanks to a highly automated assembly process that uses over 30 welding robots to assemble the core Megapack structure. This is the largest manufacturing fixture Tesla uses— likely to only be matched by future developments at Mega Shanghai.
Tesla uses a highly automated powder coating process, utilizing over 90 robotic paint atomizers to apply more than 140 pounds of powder coat to each Megapack. This process delivers Tesla’s signature white reflective finish, engineered for long-term durability and corrosion resistance that lasts up to 20 years, even in harsh coastal or high-heat environments.
All of Megapack’s power electronics are designed and built in-house. Each Megapack uses 24 battery modules, electrical busing, and thermal management systems to ensure grid reliability and help to maximize energy density. The architecture pairs each inverter with a battery module to maximize energy availability and overall uptime. Plus, before each Megapack ships its way across the world, Tesla performs rigorous on-site quality control to ensure that the installation process is as seamless as possible.
Watch Tesla’s video of the manufacturing process below:
Megapack’s Real-World Impact: Hawaii
The core purpose of Megapack is to make power grids more stable and resilient while also reducing reliance on dirty peak power plants like coal. They achieve this by balancing energy supply and demand in real-time, smoothing out fluctuations from variable renewable sources like solar and wind, which helps to prevent grid shortages.
Hawaii actually provides the most real and down-to-earth example of Megapack’s impact. In mid-2024, the Kapolei Energy Storage facility in Hawaii came online. Hawaii utilized 258 Megapacks with a combined capacity of 565 MWh, successfully replacing the state’s last coal-fired power plant. This single facility can power approximately 20% of Oahu’s peak electricity needs by itself for approximately 4 hours.
The project is more than just removing coal plants, though. It serves as an example of Megapack’s grid integration and grid forming technology. The Kapolei Energy Storage facility can manage grid fluctuations caused by weather changes impacting renewable energy, improving stability and preventing blackouts. Thanks to their rapid inverter response times of under a millisecond, Megapacks participate in complex grid balancing activities, including fast frequency and voltage support, which helps to maintain grid balance throughout the day. Beyond that, Kapolei also allows Hawaii to black-start the grid in case of a major power outage that takes out a large section of the grid.
This functionality would be especially useful in Spain, where black-starting the grid took over eight hours recently and is still disrupting the day-to-day life of people there.
You can check out Megapack’s real-world impact in this video from Tesla below: