Tesla previously told its employees on the Cybertruck production line that work would be halted for three business days and that they would not be required to show up to Giga Texas for any other work. Work was halted on the Cybertruck line from December 3rd until December 6th.
Many speculated that Tesla had hit a demand mark with the Cybertruck or run into other production-related difficulties. However, pausing production for such a short period is a fairly normal business operation, as Tesla continuously retools and upgrades its production lines.
Halts for business demand tend to look more similar to Ford’s F-150 Lightning production halt - where they halted production from November 18, 2024, until January 6, 2025. Ford also announced that this production halt was due to reduced demand for its electric truck in the face of stiffer competition.
Cybertunnel
In this case, part of the reason for the halt could potentially have been due to upgrades to the underground tunnel that is used to move Cybertrucks fresh from the production line to the holding lot at Giga Texas. Tesla has been working on improving the production flow rate for its vehicle - and rather than encountering issues with production, they’ve previously mentioned they’ve had issues with getting vehicles out of their outbound parking lots and off their assembly lines - and into customers’ hands fast enough.
The Cybertunnel moves trucks from inside Giga Texas to the holding lot just outside the factory. At that holding lot, they’re either loaded into trains or trucks to be transported across North America. The tunnel passes underneath Texas Highway 130, helping to ensure that Tesla isn’t clogging up traffic crossing the highway with brand-new trucks.
More Shut Downs?
It’s likely we’ll see even more shutdowns at Giga Texas in the coming months. Tesla has shown that it intends to continue increasing production rates at Giga Texas, which means it will need time to upgrade its assembly lines and processes. In addition, the Model Y is also produced at Giga Texas—and once the Model Y Juniper arrives, there will need to be shutdowns to accommodate re-tooling.
So, no need to stress - it's just regular operations. And we get to see a cool Cyber-themed tunnel too. In the meantime, check out Joe Tegtmeyer’s drone video of Giga Texas below.
Giga Texas on this cold 6 December 2024 morning! Big news with the @boringcompany paving & tunnel covering structure on W side, new mystery construction on W side of GA, continued work on SW corner for tunnel alternate exit & production of both @cybertruck & Model Y today,… pic.twitter.com/94a894ix1I
There has been extensive reporting on what the long-anticipated affordable EV option would become, and we’ve seen numerous news stories mentioning that it was delayed or even arriving on time. The executive team revealed the near-term and long-term plans for Tesla’s upcoming vehicles, and there’s definitely good news to share here.
Updated Timeline
The most important piece of news is that despite all the talk of delays from supposed inside sources, Tesla has confirmed that the plan for its more affordable model remains on schedule for production to begin in the first half of 2025. Tesla’s executive team narrowed that timeline down further - and said that they expect production to kick off as soon as June and that the new model will be in the market shortly thereafter.
While the production timeline itself is on track, Tesla did note that the subsequent ramping process will likely be slower than initially hoped, citing global tariff and financial impacts as challenges to overcome to prepare its production lines.
Hybrid Production Approach
Tesla has once again confirmed that this will not be their next-generation vehicle, built using new production methods. Instead, they outlined a relatively more pragmatic approach for this new model.
Tesla will utilize aspects of both the next-generation platform as well as some parts of its current platforms (namely the Model 3 and Model Y). This means that Tesla will produce this new vehicle on the same manufacturing lines as the Model 3 and Model Y.
This strategy allows Tesla to bring the vehicle to the market more quickly, while also managing capital expenditures more efficiently by using existing infrastructure. However, Tesla’s executive team also noted that this approach, while faster, will result in fewer cost reductions than what might have been achieved with an entirely new platform and dedicated manufacturing process.
Vehicle Design
Using these existing production lines means that Tesla’s new vehicle will likely share some considerable similarities with either the existing Model 3 or Model Y. Rather than being a radically different and smaller vehicle, this new model will resemble the overall form factor and shape of Tesla’s current core offerings, while being optimized for a lower cost.
This doesn’t mean that Tesla is forgetting the overall goal here. Their ultimate goal is to reduce the initial cost of ownership and lower monthly payments for customers while maintaining a standard of excellence and safety.
Not Unboxed
Both at this Earnings Call and previous ones, Tesla has indicated that this new vehicle will not be using the innovative unboxed assembly method, at least for the time being. That relatively unique method will be developed and implemented specifically for the purpose-built Cybercab and for future vehicles on the next-generation platform.
We’re just a few days away from May, so it won’t be long before we see more about this upcoming vehicle. Stay tuned.
In a follow-up move to the current US administration’s goals to introduce a federal framework for autonomous vehicles, the US Department of Transportation (USDOT) is loosening autonomy restrictions following an announcement from Secretary Sean Duffy on X. This new initiative helps streamline complex regulatory processes and foster home-grown innovation.
From the Wright Brothers to the first astronauts on the moon, our nation has always been at the forefront of transportation technology.
That’s why today we're unveiling a new Automated Vehicle Framework from @USDOT’s Innovation Agenda ⬇️ ⬇️ pic.twitter.com/W3kbMUwQSn
As part of the broader upcoming USDOT Innovation Agenda, the newly unveiled AV Framework is designed to promote American innovation and strengthen domestic engineering while maintaining existing safety standards. The framework centers around three key principles:
Prioritize Safety
Unleash Innovation
Enable Commercial Deployment
To kickstart this AV framework, USDOT announced two initial steps focused on streamlining processes and expanding opportunities.
Crash Reporting Requirements
Under the first principle to Prioritize Safety, the National Highway Traffic and Safety Administration (NHTSA) will maintain its Standing General Order requiring crash reporting on Advanced and Automated Driver Assistance Systems (ADAS and ADS).
However, the reporting process will be streamlined following feedback from AV innovators, likely including Tesla. The goal here is to focus on collecting critical safety information while removing unnecessary or duplicative items from the reporting process, thereby reducing the burden without compromising safety.
Cutting Red Tape
Directly tied to the second principle of Unleash Innovation, the framework also seeks to slash red tape. The first step here is the expansion of the Automated Vehicle Exemption Program, or AVEP. This program allows manufacturers to petition for temporary exemptions from certain federal motor vehicle safety standards (FMVSS) for testing or deployment purposes.
Previously, the standard excluded domestically produced vehicles. Now, domestically produced AVs will not need to meet FMVSS, which will broaden the scope for manufacturers to test more innovative and unique designs and technologies.
Single National Standard for AVs
Finally, tied to the third principle of Enable Commerical Development, USDOT intends to move the United States closer to a single national standard for autonomous vehicles. This aims to prevent a confusing and inefficient patchwork of state-level or city-level laws and regulations, which can create hurdles for companies attempting to innovate, deploy, and scale their technology.
A unified standard across the United States also means that Canada and Mexico will likely be able to follow, as they share homologization standards across North America, including for vehicle crash safety and some autonomy regulations.
What This Means for Tesla
These framework changes will likely have a substantial impact on Tesla. The move towards a national standard is potentially the most impactful change, as Tesla identified regulatory hurdles as one of the most significant challenges it will face with the deployment of both Unsupervised FSD and its Robotaxi network.
The reduction of FMVSS requirements and streamlined reporting will likely play a role in the future as well. The FMVSS requirements are probably already being worked on, if not already met, by the Cybercab and other vehicles in Tesla’s lineup.
Meanwhile, the streamlined reporting will be helpful once Tesla officially launches its Robotaxi network in June.
![Tesla's 2025 Q1 Earnings Call: How to Listen [Listen to Replay]](https://www.notateslaapp.com/img/containers/article_images/multiple-models/group_81.jpg/b2695a53b51e4c7927802deba2534b09/group_81.jpg)
