Unlock only the driver door when approaching the vehicle by tapping Controls > Locks > Driver Door Unlock Mode.

Each Driver Profile will now have its own individual Work and Home address. To update, select your profile, tap Navigation and long press either Work or Home.

Driver Profile settings such as seat, mirror and steering wheel positions can now synchronize across supported vehicles owned by the same Tesla Account. To enable for a particular profile, tap the Profile icon from the status bar > Driver Profile Settings > Vehicle Sync (Beta).

Note: Some settings will only synchronize between the same vehicle type.

Note: This feature is only enabled on select vehicles for testing.

Adjust the rear cabin climate from the front touchscreen by tapping Climate Controls > Rear Climate.

Autopark now identifies perpendicular parking spots using painted markings and road edges.

Due to local safety regulations, your car's rear seatbelt reminder is enabled. If the seat has a child seat, tap the seat to mute the reminder for the rest of your trip.

This is an undocumented change in this release.

Your Tesla will now report whether there is uneven wear on your tires. If a tire is showing signs of uneven wear, a message will appear on your displaying letting you know that your tires should be inspected.

This is an undocumented change in this release.

You can now calibrate your seat and steering column if you're having any issues adjusting them. To calibrate your seat and steering column, you can go to Controls > Service and tap Seat Calibration.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

- Improved short-deadline lane changes, to avoid going off-route, through better modeling of target lane vehicles to improve gap selection assertiveness.

- Improved offset consistency when controlling for static obstacles. Also improved smoothness when changing offset direction by adjusting speed more comfortably.

- Improved handling of oncoming cars on narrow unmarked roads by improving prediction of oncoming car's trajectory and leaving enough room for them to pass before re-centering.

- Improved Occupancy Flow prediction from the Occupancy Network for arbitrary moving obstacles by 8%.

- Expanded usage of the new object ground truth autolabeler for the NonVRU detection model, improving distant vehicle recall and geometry precision for semi-trucks, trailers, and exotic vehicles.

- Improved VRU control by expanding planning scope to control gently for low-confidence detections that may interfere with ego's path.

- Improved handling for VRUs near crosswalks by predicting their future intent more accurately. This was done by leveraging more kinematic data to improve association between crosswalks and VRUs.

- Improved ego's behavior near VRUs by tuning their assumed kinematic properties and utilizing available semantic information to classify more accurately their probability of intersecting ego's path.

- Improved Automatic Emergency Braking recall in response to cut-in vehicles and vehicles behind ego while reversing.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.