Update 2026.14.300 - Release Notes

Tesla has added confetti when you reach numerous FSD streak milestones.

Tesla has moved the Add Stop menu directly into the Destination module, letting drivers easily add another destination without going into the More menu (…) and tapping Edit Trip.

Tesla has replaced the Curbside parking option with Pull Over. The parking options will now also automatically appear as you approach your destination, making it easier to switch your parking choice if needed.

The vehicle will now display the destination you’re navigating to when you start FSD. A similar message will also appear at the end of the drive, reminding you that you’re approaching your destination.

Tesla has updated the intervention menu to include new reasons for disengagement. Parking, possibly the most popular reason for disengaging behind navigation, has now been added as an option. Tesla has also brought back ‘Other.’ There are still only four reasons for intervening, so that means that ‘Preference’ and ‘Discomfort’ have been removed.

Tesla cloud profiles now feature a new cloud icon to indicate they’re cloud profiles rather than local profiles stored only on the vehicle.

This update properly visualizes vehicles with amber brake lights. Some regions require turn signals to be orange/amber. Up until now, the visualization has only displayed turn signals in red, but with this update, Tesla now properly displays amber turn signals for the appropriate vehicles.

The Unreal Engine brings drastic improvements to lighting in the visualization, making the brake lights much more noticeable as they reflect on the ground.

Tesla’s parental controls are designed to keep new drivers safe by limiting access to certain features. Parents can reduce the vehicle’s acceleration, limit the top speed, and prevent safety features from being turned off.

With this update, Tesla is adding another improvement to Parental Controls for Performance vehicles. Track Mode is now restricted when you enable Require Safety Features, preventing teens from manipulating the vehicle's handling, braking, and more.

Require Safety Features prevents these features from being turned off:

• Automatic Emergency Braking

• Obstacle-Aware Acceleration

• Automatic Blind Spot Camera

• Blind Spot Collision Warning Chime

• Automatic 911 Call (US only)

• Allow Mobile Access

• Park Assist Chimes

It also prevents these settings from being changed:

• Track Mode is disabled

• Lane Departure Avoidance is set to Assist

• Speed Limit Warning set to Chime

  • Speed Limit set to relative

  • Offset set to +5 mph (8 km/h)

• Forward Collision Warning set to Early

Tesla has added a new camera visibility alert with this update. What’s most interesting about this alert is that Tesla states that the poor camera visibility is resulting in increased attention monitoring.

With the introduction of the "Hey Grok" wake word, Tesla has changed the way Grok behaves. Previously, once Grok was triggered, it would remain active indefinitely, staying in a constant listening state.

Now, in order to turn off accidental activations and minimize background processing, Grok will automatically dismiss itself after approximately 15 seconds of inactivity.

This behavior applies regardless of whether you triggered the assistant using the new voice wake word or the physical steering wheel button. For those who prefer to close the interface manually, you can still use natural language dismissal commands; simply saying "goodbye" or "talk to you later" will instantly close Grok.

h/t: @Deandawiz

The integrated Grok assistant now has access to your vehicle’s saved favorites. Grok can now "see" and interpret the custom labels you have assigned to your saved locations.

For example, if you have an address saved as "Kim’s parents," you can simply say, "Hey Grok, navigate to “Kim’s parents," and the system will immediately pull the correct address from your list of favorites.

h/t: @NickScheber

Tesla has updated the Software Update Preference setting under the Software menu.

Previously, the software update preference was a toggle between "Standard" and "Advanced." This has now changed into a simpler on/off toggle for "Advanced" updates.

By switching this to "On," you are opting in to receive the latest software releases as soon as they become available for your specific vehicle configuration and region. This could result in receiving updates with minor bugs or receiving updates more often.

If left "Off," your vehicle will wait for a wider release before installing updates.

You can reorder the new trip meters however you’d like. Simply tap and hold one to get it to jiggle, and then move it to a new location.

Additionally, you can also tap on the energy graph in the top-right corner to view a larger, more detailed version of it.

Tesla has upgraded the browser in the vehicle. Tesla’s browser is based on the open-source Chromium browser, the same browser that powers Google’s Chrome browser.

The browser was updated to version 140, up from version 136.

This update to Chromium increases compatibility with modern web standards, improves WebGPU performance, and resolves known issues.

Tesla continues to make it easier to browse and save recent Dashcam clips. In the last update, Tesla made it easier to browse recent, non-saved Dashcam clips by listing them at the top of the Dashcam Viewer.

With this update, they’re now letting you save recent clips that are still on the USB drive, but not saved from being deleted.

When adjusting the volume of an app, such as Spotify, the volume icon will now display the app's icon. While the navigation volume has always had its own icon and an independent volume setting, this change does not add app-dependent volume settings.

The same volume that’s used for Spotify will be used for YouTube and other apps. This icon simply makes it more obvious which volume is being changed.

Driver profiles are now also available in vehicle settings, rather than only in the Profiles icon in the status bar.

Users can navigate to Controls > Profiles to see the settings for all driver profiles.

Grok settings are now also shown in the Audio section under Controls. These are the same settings available in the Grok app, but Tesla appears to be duplicating most of them under controls to make them easier to find.

A new Autopilot/FSD visualization has been found in this update. The cab-over-engine style semi trucks often seen in Europe are now appearing in Autopilot visualizations with this update.

Tesla has updated the ‘All Apps’ icon displayed in the dock. Instead of an ellipsis inside of a rectangle, Tesla has now created a design that resembles iOS folders. The new design shows four apps inside the folder, but it’s not a static image.

The apps shown in the folder will change, presumably to show your most recent or most popular apps that aren't displayed in the dock.

To go along with the new ‘App Apps’ icon, Tesla has also increased the size of all icons in the dock. While the dock appears to remain the same size, the icons are now larger.

Tesla models that have special badges, such as the Ludicrous badge on the Performance Model 3, are now animated in Software screen.

Upon navigating to the Software menu, the badge will play a short animation. You can also tap the badge to replay the animation.

With the introduction of Photobooth, Tesla added a Photobooth section to the top level of the app that lets you view your saved photo sessions.

With the Spring Update and the update to the Sketchpad app for AMD Ryzen vehicles, Tesla is rebranding the Photobooth section to Creations, and it’ll now house Photobooth photos and sketches created in Sketchpad.

When you go into Creations, you’ll now have two tabs, one for Photobooth and one for Sketchpad, however, the features are similar. You’ll be able to view your saved creations and share them with others.

These creations are saved on your vehicle, not on Tesla’s servers, so when you open this section of the app, your vehicle will wake up and send the requested images.

Note: You’ll need vehicle update 2026.14 and an AMD Ryzen vehicle in order to see this new Creations section in the app.

New Service Mode Plus Authentication QR Code for Independent

Independent repairers can now quickly authenticate for Service Mode Plus by scanning a QR code displayed on the vehicle with a mobile device and logging in with their Toolbox credentials.

Models: All vehicles

Blinking DTC indicator added to the bottom banner

A Diagnostic Trouble Code (DTC) indicator has been added next to the Vehicle Identification Number (VIN) on the bottom Service Mode banner. The indicator is visible when DCs are present on the vehicle.

Models: All vehicles

Noise Recording Panel Updates (Service Mode Plus)

The Noise Recording panel now supports Active Noise Cancellation (ANC microphone recording. When ANC mode is enabled, the panel displays ANC microphone locations and extends the recording duration to 3 minutes.

Models: Model S (2021+), Model X (2021+), Cybertruck

Vehicle Functions Panel Added to Service Mode

The Vehicle Functions panel is now available on Service Mode. It shows an overview of degraded vehicle functions and their associated set alerts. Full functionality including more detailed functions, historical view and advanced controls are still only available on Service Mode Plus.

Models: Model 3, Model Y

New Bluetooth Panel

A new Bluetooth panel is available under Infotainment to support Bluetooth system diagnosis. The panel displays the status of both the main and rear Bluetooth modules (if rear Bluetooth is available on the vehicle), including connection states, signal strength with health indicators, and connected device information.

Models: Model S (2021+), Model 3, Model X (2021+), Model Y, Cybertruck