The cabin camera above your rearview mirror can now determine driver inattentiveness and provide you with audible alerts, to remind you to keep your eyes on the road when Autopilot is engaged. Camera images do not leave the vehicle itself, which means the system cannot save or transmit information unless you enable data sharing. To change your data settings, tap Controls > Safety & Security > Data Sharing on your car's touchscreen.

You can enable Full Self-Driving (Beta) by tapping 'Control' > 'Autopilot' > 'Full Self-Driving (Beta)' and following the instructions.

Full Self-Driving is in early limited access Beta and must be used with additional caution. It may do the wrong thing at the worst time, so you must always keep your hands on the wheel and pay extra attention to the road. Do not become complacent. When Full Self-Driving is enabled your vehicle will make lane changes off highway, select forks to follow your navigation route, navigate around other vehicles and objects, and make left and right turns. Use Full Self-Driving in limited Beta only if you will pay constant attention to the road, and be prepared to act immediately, especially around blind corners, crossing intersections, and in narrow driving situations.

Your vehicle is running on Tesla Vision! Note that Tesla Vision also includes some temporary limitations, follow distance is limited to 2-7 and Autopilot top speed is 85 mph.

- Improved short-deadline lane changes, to avoid going off-route, through better modeling of target lane vehicles to improve gap selection assertiveness.

- Improved offset consistency when controlling for static obstacles. Also improved smoothness when changing offset direction by adjusting speed more comfortably.

- Improved handling of oncoming cars on narrow unmarked roads by improving prediction of oncoming car's trajectory and leaving enough room for them to pass before re-centering.

- Improved Occupancy Flow prediction from the Occupancy Network for arbitrary moving obstacles by 8%.

- Expanded usage of the new object ground truth autolabeler for the NonVRU detection model, improving distant vehicle recall and geometry precision for semi-trucks, trailers, and exotic vehicles.

- Improved VRU control by expanding planning scope to control gently for low-confidence detections that may interfere with ego's path.

- Improved handling for VRUs near crosswalks by predicting their future intent more accurately. This was done by leveraging more kinematic data to improve association between crosswalks and VRUs.

- Improved ego's behavior near VRUs by tuning their assumed kinematic properties and utilizing available semantic information to classify more accurately their probability of intersecting ego's path.

- Improved Automatic Emergency Braking recall in response to cut-in vehicles and vehicles behind ego while reversing.

To view an expanded driving visualization when in drive with Full Self-Driving enabled, drag the light gray visualization bar to the right.

For maximum safety and accountability, use of Full Self-Driving (Beta) will be suspended if improper usage is detected. Improper usage is when you, or another driver of your vehicle, receive five 'Forced Autopilot Disengagements'. A disengagement is when the Autopilot system disengages for the remainder of a trip after the driver receives several audio and visual warnings for inattentiveness. Driver-initiated disengagements do not count as improper usage and are expected from the driver. Keep your hands on the wheel and remain attentive at all times. Use of any hand-held devices while using Autopilot is not allowed.

The FSD Beta feature can only be removed per this suspension method and it will be unavailable for approximately one week.

Drag your blind spot camera to another location on your touchscreen. After you move the camera window, it will appear in that same position whenever your turn signal is on.

Go to Controls > Autopilot > Automatic Blind Spot Camera.

Do more with the left scroll button on the steering wheel. You can adjust settings like brightness and acceleration mode, or perform actions like toggle the camera, raise suspension, open the glovebox, or save Dashcam footage.

Long press the left scroll button to bring up a list of functions and scroll through the list. To choose which function comes up by default, go to Controls > Display > Scroll Wheel Function.

Navigation now shows if your destination is closing soon or may be closed by the time you arrive.

Play your Spotify music, playlists, podcasts, and audiobooks with a more familiar look and feel.

Go to App Launcher > Spotify. Requires Premium Connectivity.

Use Bluetooth controllers to play games in Arcade.

To pair a controller, open the Bluetooth panel and follow the instructions.

This feature works best with PS5 controllers. Refer to the Owner's Manual for more information.

Set your touchscreen to automatically adjust to warmer colors at night.

Go to Controls > Display > Reduce Blue Light.

Your lights turn on automatically when windshield wipers are activated and headlights are set to Auto in Controls > Lights > Headlights.

Charge your Tesla with solar energy if you have a Powerwall. You can choose how much charging comes from solar versus other sources.

To set it up, open the Tesla app for your vehicle, tap the “Charge on Solar” message, and follow the instructions. Requires Powerwall v23.12.10 and Tesla app v4.22.5.

You can now see multiple cameras at once when checking your vehicle's surroundings.

To start using this feature, go to your vehicle settings in Controls > Safety > View Live Camera via Mobile App.

This feature requires Mobile App v4.22.5 and Premium Connectivity.

Defend yourself against an onslaught of night creatures to survive until dawn.

To play, shift to Park (P) and go to the App Launcher > Arcade > Vampire Survivors.

Recents & Favorites are now in separate tabs in the Media Player.

The sliders to adjust volume, temperature, and charge limit are more precise

Sentry Mode records if someone tries to open a door or trunk when the vehicle is locked.

Access the Owner's Manual and Release Notes more quickly with the new Manual app. Read up on everything from regenerative braking to phone key or maximizing range.

Automatic Navigation shows more details about your destination.

Swiss French keyboard is available.

Availability varies by model and location.

When you have your climate system set to 'Auto,' the HVAC fan speed may be lowered automatically to reduce cabin noise while you're on a phone call.

Several new diagnostic screens have been added to service mode. They include the ability to test your steering wheel stalks, scroll wheels, horn and parking brake. You can now view the status and details of your airbags, low-voltage battery and the pitch of your vehicle's cameras.

Service Mode is a mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

When charging your vehicle at a Tesla Supercharger, your vehicle will now display more details about the Supercharging session.

On the Charging screen (Controls > Charging), your Tesla will now display the price per kWh you're being charged, as well as the total energy charged.

This is in addition to the Supercharger location and the total cost for the Supercharger session, both of which were added in prior updates.

Photo by Zer

If you have Automatic Navigation enabled in your Tesla, you'll now be presented with your suggested destination when you enter your vehicle.

The popup on the screen will display your destination, your ETA, battery upon arrival, as well as a photo of your destination if available.

You can begin driving to automatically start the route, or you can cancel the suggested destination.

Note: You can turn on Automatic Navigation by going to Controls > Navigation and enabling Automatic Navigation.

Similar to the "New" badges that Tesla added in update 2023.12 that signify which features are new in menus, Tesla will now display a blue dot underneath each app that is new or has been updated.

The recommended daily charge level has been updated for some vehicles. Depending on your vehicle, the types of batteries it uses and where it was manufactured, Tesla may have lowered the recommended daily charge limit.

Software Release Notes are now part of the Manual App, which already houses the owner's manual and tutorials. The app's icon has also been updated slightly.

You can tab between the three sections of the app by tapping on the names near the top.

The Release Notes' left column has been simplified and now only lists the name of the new feature, instead of the category such as "Climate Control Improvements."

Drag your blind spot camera to another location on your touchscreen. After you move the camera window, it will appear in that same position whenever your turn signal is on.

Go to Controls > Autopilot > Automatic Blind Spot Camera.

Do more with the left scroll button on the steering wheel. You can adjust settings like brightness and acceleration mode, or perform actions like toggle the camera, raise suspension, open the glovebox, or save Dashcam footage.

Long press the left scroll button to bring up a list of functions and scroll through the list. To choose which function comes up by default, go to Controls > Display > Scroll Wheel Function.

Navigation now shows if your destination is closing soon or may be closed by the time you arrive.

Play your Spotify music, playlists, podcasts, and audiobooks with a more familiar look and feel.

Go to App Launcher > Spotify. Requires Premium Connectivity.

Use Bluetooth controllers to play games in Arcade.

To pair a controller, open the Bluetooth panel and follow the instructions.

This feature works best with PS5 controllers. Refer to the Owner's Manual for more information.

Set your touchscreen to automatically adjust to warmer colors at night.

Go to Controls > Display > Reduce Blue Light.

Your lights turn on automatically when windshield wipers are activated and headlights are set to Auto in Controls > Lights > Headlights.

Charge your Tesla with solar energy if you have a Powerwall. You can choose how much charging comes from solar versus other sources.

To set it up, open the Tesla app for your vehicle, tap the “Charge on Solar” message, and follow the instructions. Requires Powerwall v23.12.10 and Tesla app v4.22.5.

You can now see multiple cameras at once when checking your vehicle's surroundings.

To start using this feature, go to your vehicle settings in Controls > Safety > View Live Camera via Mobile App.

This feature requires Mobile App v4.22.5 and Premium Connectivity.

Defend yourself against an onslaught of night creatures to survive until dawn.

To play, shift to Park (P) and go to the App Launcher > Arcade > Vampire Survivors.

Recents & Favorites are now in separate tabs in the Media Player.

The sliders to adjust volume, temperature, and charge limit are more precise

Sentry Mode records if someone tries to open a door or trunk when the vehicle is locked.

Access the Owner's Manual and Release Notes more quickly with the new Manual app. Read up on everything from regenerative braking to phone key or maximizing range.

Automatic Navigation shows more details about your destination.

Swiss French keyboard is available.

Availability varies by model and location.

When you have your climate system set to 'Auto,' the HVAC fan speed may be lowered automatically to reduce cabin noise while you're on a phone call.

Several new diagnostic screens have been added to service mode. They include the ability to test your steering wheel stalks, scroll wheels, horn and parking brake. You can now view the status and details of your airbags, low-voltage battery and the pitch of your vehicle's cameras.

Service Mode is a mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

When charging your vehicle at a Tesla Supercharger, your vehicle will now display more details about the Supercharging session.

On the Charging screen (Controls > Charging), your Tesla will now display the price per kWh you're being charged, as well as the total energy charged.

This is in addition to the Supercharger location and the total cost for the Supercharger session, both of which were added in prior updates.

Photo by Zer

If you have Automatic Navigation enabled in your Tesla, you'll now be presented with your suggested destination when you enter your vehicle.

The popup on the screen will display your destination, your ETA, battery upon arrival, as well as a photo of your destination if available.

You can begin driving to automatically start the route, or you can cancel the suggested destination.

Note: You can turn on Automatic Navigation by going to Controls > Navigation and enabling Automatic Navigation.

Similar to the "New" badges that Tesla added in update 2023.12 that signify which features are new in menus, Tesla will now display a blue dot underneath each app that is new or has been updated.

The recommended daily charge level has been updated for some vehicles. Depending on your vehicle, the types of batteries it uses and where it was manufactured, Tesla may have lowered the recommended daily charge limit.

Software Release Notes are now part of the Manual App, which already houses the owner's manual and tutorials. The app's icon has also been updated slightly.

You can tab between the three sections of the app by tapping on the names near the top.

The Release Notes' left column has been simplified and now only lists the name of the new feature, instead of the category such as "Climate Control Improvements."

Go to Controls > Service to see how many miles it's been since your last tire service.

When you get your tires rotated, replaced, or swapped, tap 'Reset'.

You can also go to Controls > Service > Wheel and Tire > Tire to input your tire configuration. This tells your car to reset the learned tire settings to improve your driving experience.

Go to Controls > Service to see how many miles it's been since your last tire service.

When you get your tires rotated, replaced, or swapped, tap 'Reset' to reset the counter.

Large text size feature is now available in all supported languages.

To update your settings, go to Controls > Display > Text Size.

The Pinyin keyboard now features an expanded dictionary and other improvements.

Type abbreviated or full input, then select an option from the candidate window. Your most commonly used candidates are shown first, and after you select one, the window shows suggestions based on your choice.

Windshield wiper controls have now been added to the list of options that you can control in Scroll Wheel Function.

The steering wheel customization feature lets you control a variety of vehicle settings directly from the steering wheel. You simply long press the left scroll wheel and you can scroll through various settings and options such as HVAC fan speed, rear camera and more.

You can customize the list of options shown, or add the windshield wiper functionality to the list by navigating to Controls > Display > Scroll Wheel Function.

If you use your phone as a key for your Tesla, the device name that shows up in Bluetooth settings now has a more intuitive name.

The device name used to be a string of 18 characters without the word Tesla anywhere in the name, leaving some users wondering what the mystery may be.

As of this update, the vehicle key will now be displayed as "Tesla" followed by the last six characters of the vehicle's VIN.

In some regions, Tesla is now displaying an updated Data Sharing policy. The new policy allows you to enable or disable several additional options for data sharing. Enabling some or all of these options allows Tesla to collect additional data from your vehicle to improve Autopilot and other features.

Tesla makes it clear that they do not sell your data, that the data is anonymized, and that it's only used to improve their products. The one exception that Tesla mentions is if there is a 'safety critical' event, which may cause camera data to be linked to your vehicle.

You can allow Tesla to collect data for Autopilot, additional start and end drive data, which includes Summon and Park Assist, data when your vehicle is parked, and cabin camera analytics.

When searching for a destination in the vehicle's navigation system, the search results will now display which destinations are open and which are closed.

Photo by Garth Schanock

You can now enable the 'PIN to Drive' feature directly from the Tesla app. Simply navigate to Security & Drivers, toggle it on and set your PIN.

Having the ability to enable PIN to Drive in the app is useful for owners who may normally not use it, but may want to remotely enable the feature if they lose their key fob or phone.

This feature requires app update 4.21.5 or higher.

You can now preview more than just the cabin camera in your Tesla. By navigating to Controls > Service, you can now preview all nine (eight on hardware 4.0) of Tesla's cameras. This includes being able to view all the front-facing cameras and B-pillar cameras for the first time.

You can change cameras by tapping the name of the camera at the top of the live video.

Note: These camera views are only here to give customers a better understanding of what their vehicle can see and to confirm that the cameras are working correctly. There is no additional functionality gained from this feature, at this time.

The 'Current Trip' odometer metrics have been updated with this update. Instead of displaying kWh, the Current Trip odometer will now display the number of minutes elapsed since the vehicle was put into drive.

The other odometers, such as 'Since Last Charge', 'Trip A' and 'Trip B' still display kWh.

The app launcher at the bottom of the screen will now only display the driver's climate setting if there is no one sitting in the passenger seat.

If someone sits in the passenger seat, the passenger temperature setting will automatically appear.

This update also includes the release notes for FSD Beta 11.3.6, with availability in the U.S. and Canada. It's not clear yet whether FSD Beta is exposed to the end user, but it looks like Tesla is close to, if they haven't already merged FSD Beta updates with regular production updates.