You can now request early access to Full Self-Driving Beta pending eligibility. To get started, tap Controls > Autopilot > Request Full Self-Driving Beta and follow the instructions.

You can now access Sirius XM from the Media source selector with a Sirius XM subscription.

Immersive Sound now has additional granularity along with an AUTO setting which will adjust based on the type of content playing. To access, tap Media > Audio Settings > Immersive Sound > AUTO.

Additionally, you can now adjust your subwoofer from the Media Settings panel.

You can now select Greek as your language. To update your language setting, tap Controls > Display and select the desired option from the Language drop down menu.

Note: Your vehicle must be in PARK to change languages.

The cabin camera above your rearview mirror can now determine driver inattentiveness and provide you with audible alerts, to remind you to keep your eyes on the road when Autopilot is engaged. Camera images do not leave the vehicle itself, which means the system cannot save or transmit information unless you enable data sharing. To change your data settings, tap Controls > Safety & Security > Data Sharing on your car's touchscreen.

Your vehicle can now automatically park in parallel and perpendicular spots. While driving below 15 mph (25 km/h), the instrument cluster will display a parking icon if it detects a potential parking spot. To initiate Autopark, tap-and-hold the Autopark button in the shift panel, and release the steering yoke. For more information on Autopark, please refer to the Owner's Manual.

A recalibrated suspension damping algorithm allows for smoother control and improved ride comfort. A rebalanced rebound-to-compression ratio works with the all-new multilink rear suspension to enhance steering response and handling for a higher degree of road connection and more precise control during spirited driving.

Child Lock replaces Camera under Controls. You can still access Camera via the bottom bar on your touch screen.

Your keyboard now supports English and Hebrew. To switch between languages, tap "A B C" on the bottom of your keyboard.

Your vehicle's range estimation has been modified to better represent real-world conditions.

Manage acceleration and set a maximum speed between 80 km/h and 145 km/h. To activate, tap Controls > Safety & Security from your touchscreen while parked. You must use the same 4-digit PIN to enable or disable Speed Limit Mode.

QQ Music now supports High Quality and VIP tracks with personalized recommendations and customized radio selections. To see if a track is HQ and/or VIP, find the corresponding badge next to the song title in the media player. Additionally, the login experience has been improved with a simple QR code that can be scanned with any supported application.

Note: Membership status and user data in QQ and WeChat accounts are not synced. This change may prompt you to login to your account once again.

This is an undocumented change in this release.

Tesla has redesigned the Controls panel on the new 2021 Model S. It now features a rendering of the car, similar to the parked visualization you'd find on a Model 3 or Model Y. You can lock/unlock the vehicle, as well as open the frunk or trunk by tapping the appropriate area on the vehicle. The buttons that made up the Controls panel before are still available underneath the view of the car.

Please check back shortly. If you have received 2021.32.31, you can share release notes with us below.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

- Improved short-deadline lane changes, to avoid going off-route, through better modeling of target lane vehicles to improve gap selection assertiveness.

- Improved offset consistency when controlling for static obstacles. Also improved smoothness when changing offset direction by adjusting speed more comfortably.

- Improved handling of oncoming cars on narrow unmarked roads by improving prediction of oncoming car's trajectory and leaving enough room for them to pass before re-centering.

- Improved Occupancy Flow prediction from the Occupancy Network for arbitrary moving obstacles by 8%.

- Expanded usage of the new object ground truth autolabeler for the NonVRU detection model, improving distant vehicle recall and geometry precision for semi-trucks, trailers, and exotic vehicles.

- Improved VRU control by expanding planning scope to control gently for low-confidence detections that may interfere with ego's path.

- Improved handling for VRUs near crosswalks by predicting their future intent more accurately. This was done by leveraging more kinematic data to improve association between crosswalks and VRUs.

- Improved ego's behavior near VRUs by tuning their assumed kinematic properties and utilizing available semantic information to classify more accurately their probability of intersecting ego's path.

- Improved Automatic Emergency Braking recall in response to cut-in vehicles and vehicles behind ego while reversing.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.