Smart Summon er utviklet for at bilen skal kunne kjøre til deg (ved hjelp av telefonens GPS som måldestinasjon) eller et sted du velger. Den manøvrerer rundt og stopper for gjenstander etter behov. I likhet med Summon er Smart Summon bare ment for bruk på private parkeringsplasser og innkjørsler. Du er fremdeles ansvarlig for bilen og må hele tiden holde øye med den og omgivelsene i siktlinjen, fordi den registrerer kanskje ikke alle hindringer. Vær spesielt forsiktig rundt folk, sykler og biler i rask bevegelse.

Når du skal aktivere funksjonen i Tesla-mobilappen, trykker du på Summon og deretter Smart Summon-ikonet. Når du skal aktivere Smart Summon, trykker du på og holder nede KOM TIL MEG-knappen. Alternativt kan du trykke på målikonet, angi en måldestinasjon ved å justere kartet, og deretter trykke på og holde inne GÅ TIL MÅL-knappen. Du kan stoppe bilen når som helst ved å slippe knappen.

Merk: Smart Summon krever versjon 3.10.2 eller nyere av Tesla-mobilappen. Se i brukerhåndboken for ytterligere informasjon om denne funksjonen.

Smart Summon er utviklet for at bilen skal kunne kjøre til deg (ved hjelp av telefonens GPS som måldestinasjon) eller et sted du velger. Den manøvrerer rundt og stopper for gjenstander etter behov. I likhet med Summon er Smart Summon bare ment for bruk på private parkeringsplasser og innkjørsler. Du er fremdeles ansvarlig for bilen og må hele tiden holde øye med den og omgivelsene i siktlinjen, fordi den registrerer kanskje ikke alle hindringer. Vær spesielt forsiktig rundt folk, sykler og biler i rask bevegelse.

Når du skal aktivere funksjonen i Tesla-mobilappen, trykker du på Summon og deretter Smart Summon-ikonet. Når du skal aktivere Smart Summon, trykker du på og holder nede KOM TIL MEG-knappen. Alternativt kan du trykke på målikonet, angi en måldestinasjon ved å justere kartet, og deretter trykke på og holde inne GÅ TIL MÅL-knappen. Du kan stoppe bilen når som helst ved å slippe knappen.

Smart Summon har begrenset funksjonalitet i enkelte land på grunn av lokale forskrifter. Telefonen må være innenfor en radius på seks meter fra bilen til enhver tid, og bilen vil bare kjøre opptil 20 meter for hver anvendelse av Summon-funksjonen. Hvis maksimal kjørelengde er nådd, blir Smart Summon utilgjengelig, og kjøretøyet må kjøres manuelt for å tilbakestille funksjonen.

Telefonen din må kobles aktivt til bilen via Bluetooth for å bruke Smart Summon – på samme måte som man kobler til for å foreta telefonsamtaler eller strømme media fra telefonen. Når du skal pare telefonen, trykker du på Bluetooth-ikonet på statuslinjen øverst på berøringsskjermen.

Merk: Smart Summon krever versjon 3.10.3 eller nyere av Tesla-mobilappen. Se i brukerhåndbok

Naviger på Autopilot gir intelligente forslag til filskifter for å holde deg på ruten, og foretar justeringer slik at du ikke blir sittende fast bak saktegående biler eller lastebiler.

Aktiver Naviger på Autopilot ved å gå til Kontroller > Autopilot og aktivere Autostyring først. For hver rute der funksjonen er tilgjengelig, har du muligheten til å aktivere eller deaktivere den ved å trykke på knappen NAVIGER PÅ AUTOPILOT i Navigasjons anvisningsliste. Du kan også aktivere Naviger på Autopilot ved starten av hver rute der funksjonen er tilgjengelig, ved å stille inn AKTIVER VED START AV HVER TUR til JA

Når Naviger på Autopilot er aktivert for din rute, kan den aktiveres på motorveier ved å trekke cruisekontrollhendelen mot deg to ganger raskt etter hverandre. Når den er aktivert, vil en enkel, blå linje angi banen forover og holde bilen i filen. Grå linjer kan vises for å angi kommende filskifter basert på ruten, eller for å foreslå muligheter for å bytte til en raskere fil. Når Naviger på Autopilot er aktiv, vil den også føre bilen mot motorveikryss og -avkjørsler, basert på destinasjonen.

Når Naviger på Autopilot er aktivert for din rute, kan den aktiveres på motorveier ved å flytte girspaken helt ned to ganger raskt etter hverandre. Når den er aktivert, vil en enkel, blå linje angi banen forover og holde bilen i filen. Grå linjer kan vises for å angi kommende filskifter basert på ruten, eller for å foreslå muligheter for å bytte til en raskere fil. Når Naviger på Autopilot er aktiv, vil den også føre bilen mot motorveikryss og -avkjørsler, basert på destinasjonen.

Du kan

Kjørevisningen viser nå flere elementer, deriblant røst lys, stoppskilt og enkelte veiskilt. Visningen av stoppskilt og rødt lys er ingen erstatning for en årvåken sjåfør, og funksjonen vil ikke stoppe bilen. For å kunne se disse elementene i kjørevisningen, trykk på Kontroller > Autopilot > Forhåndsvisning av fullstendig selvkjøring.

Når du kjører raskere enn kjøretøy i nabofilene, vil Autopilot-funksjonen automatisk redusere farten din. Dette er en nyttig funksjon når det er mye trafikk eller mange kjøretøy som skal flette sammen i en ny fil, eller som skal svinge av på en avkjøringsrampe. Når kjøretøyet ditt oppdager at hastigheten i nabofilen er lavere, blir filen framhevet med piler og kjøretøyene framhevet i grått i kjørevisualiseringen. Denne hastighetstilpasningen kan oppheves midlertidig ved å trykke inn gasspedalen.

Talekommandoer er konfigurert på nytt for å kunne forstå dagligtale. I denne førsteversjonen har vi fokusert på kommandoer som reduserer antall trykk på berøringsskjermen, slik at du kan holde øynene på veien. Her er noen områder og eksempler på hva du kan si:

• Klima: «Sett temperatuern til 20», «Slå på setevarmer i passasjersetet»

• Kjøretøy: «Juster høyre sidespeil», «Åpne hanskerommet»

• Navigasjon: «Da kjører vi til jobb», «Hvor er nærmeste superladerstasjon»

• Media: «Spill Beatles», «Søk etter podkasten til Joe Rogan»

• Media: «Spill Beatles»

• Kommunikasjon: «Ring David Lewis», «send en tekstmelding til Evan»

• Annet: «Vis meg kameraet bak», «Åpne Autopilot-innstillinger»

Anonymiserte talekommandoer som ikke blir gjenkjent, blir brukt til ytterligere opptrening og forbedring av systemet i kommende oppdateringer.

Nå kan du lese og svare på tekstmeldiner ved å bruke rulleknappen til høyre. Når du mottar en ny melding, kan du trykke på rulleknappen til høyre for å få meldingen lest opp. Trykker du en gang til kan du snakke inn svaret ditt. Du vil også kunne se meldingene via Kort-seksjonen på berøringsskjermen når de tikker inn.

For å se meldinger mottatt mens telefonen er tilkoblet via Bluetooth, trykk på Applikasjonsstarteren > Ring > Meldinger. Du kan lese og svare på meldinger ved å trykke på en oppføring i meldingslisten. For å aktivere funksjonen trykker du på Bluetooth-ikonet øverst på skjermen og aktiverer «Synkroniser meldinger». Når den er aktivert, kan du velge å aktivere «Lag lyd ved ny melding»-funksjonen, slik at du blir varslet når du mottar en ny tekstmelding.

I tillegg har du enkel tilgang til favorittkontaktene dine på telefonen gjennom Favoritter-fanen i appen på telefonen.

Merk: Varsler må aktiveres på enheten i Bluetooth-innstillingene for å kunne sende og motta tekstmeldinger. På grunn av begrenset Bluetooth-støtte på enheten din kan du ikke sende gruppemeldinger. Bluetooth kan oppføre seg ulikt avhengig av hvilken enhetstype som brukes.

Nå kan du lese og svare på tekstmeldiner ved å bruke rulleknappen. Når du mottar en ny melding, vil den vises på dashbordet. Trykk på READ (Les) og trykk på rulleknappen til høyre for å få meldingen lest opp. Når den er opplest, trykk på REPLY (Svar) for å snakke inn svaret ditt.

For å se meldinger mottatt mens telefonen er tilkoblet via Bluetooth

Når Camp-modus er aktivert kan bilen ordne luftgjennomstrømning, temperatur, innvendig lys, avspilling av musikk og gi strøm til enheter. For å aktivere Camp-modus trykker du på ikonet nederst på berøringsskjermen og velger CAMP for La klimaanlegget stå på-funksjonen når bilen står i PARK. Store batterier er best.

Nå kan du se Twitch i Tesla Kino-appen. For å starte Tesla Kino trykker du på Underholdning-ikonet i appstarteren og velger Kino-fanen når bilen står i PARK.

Merk: For å strømme videoer via telefonen må du ha Premium Connectivity. Gå til Tesla-kontoen din på nettet for å abonnere Premium Connectivity.

Du har arvet bestefars gårdsbruk i Stardew Valley. Utstyrt med arvede verktøy og noen få mynter setter du i gang med ditt nye liv. Klarer du å leve av gården og gjøre disse gjengrodde åkrene til et blomstrende hjem?

To spillere, to sider – én er lys, én er mørk. Spill Backgammon mot en passasjer, eller utfordre Tesla. Flytt ved å dra og slippe brikkene når det er din tur. Som med alle Tesla Arkade-spill kan du spille når bilen står i PARK, ved å trykke på programstarteren, og deretter trykker du på Underholdning > Arkade og velger hvilket spill du vil spille i menyen.

Du kan nå diktere for å lese inn tekst i bilen. Du trykker bare på mikrofonikonet på tastaturet for å lese inn tekst.

I tillegg til å lage visuelle mesterverk med Tesla Sketchpad kan du nå lage lydkunst med TRAX. Alt du trenger å gjøre er å legge til instrumenter, tilpasse tempoet og ta opp flere spor for å lage musikk i bilen. Når du er ferdig, LAGRE musikken og velg LAST OPP for å kunne spille den av senere. For å åpne TRAX trykker du på Applikasjonsstarter > Leketøy > TRAX-ikonet.

Adaptiv fjæringsdemping har nå tre tilpassede modi: KOMFORT, AUTO, SPORT. KOMFORT er en ny modus som sørger for en behagelig og mer avslappende kjøreopplevelse. AUTO erstatter STANDARD og er mer følsom for dynamisk kjøring. SPORT fortsetter med strammere, mer kontrollerte kjøreegenskaper som øker førerens tilknytning til og følelse av veibanen.

Alle moduser har forbedrede kjøreegenskaper ved lav hastighet og ved forskjellig last (flere passasjerer og bagasje). For å justere Adaptiv fjæringsdemping trykker du på Kontroller > Fjæring.

Dashbordkameraet kan lagre klipp automatisk når du tuter med bilhornet. Du aktiverer ved å trykke på Kontroller > Sikkerhet > Lagre klipp ved tuting. Gå til brukerhåndboken for å finne ut mer om hvordan du konfigurerer og bruker dashbordkameraet.

Flere navigasjonsinnstillinger er lagret til førerprofilen, deriblant volumnivåer for navigasjonsintruksjoner og innstillinger for trafikkvisning.

Du har nå mulighet til å velge dansk. For å oppdatere språkinnstillingen trykker du Kontroller > Visning og velger det ønskede alternativet fra nedtrekksmenyen Språk.

You can now choose to enable Tesla Vision Park Assist. It displays a high-fidelity 3D representation of the area around your vehicle, including the proximity and shape of nearby objects, barriers, vehicles, and painted road markings.

To enable it, go to your vehicle settings > Autopilot > Park Assist > Tesla Vision.

Park Assist is for guidance purposes only and is not a substitute for an alert driver. Remain attentive and avoid obstacles as required.

Editorial note: This feature has now been added to vehicles with ultrasonic sensors (USS) and AMD processors (MCU 3). Under Controls > Autopilot, you now have a new option to continue using measurements with USS, or use the new high-fidelity park assist without measurements displayed.

User Interface v12 elevates your visual experience with the following updates:

- Immersive full-screen vehicle controls when you're parked

- Large playback controls and quick access to Recents, Favorites, and Up Next in the media player

- Expandable Autopilot driving visualizations, with a smaller map in the top right for trip guidance

- A sleeker and more compact drive mode strip and refined driving readouts

Listen to thousands of Audible Originals, audiobooks, and podcasts. Pick up where you left off and listen seamlessly between your device and Tesla.

Scan the QR code to log in to your Audible account, or try it out with a selection of free audiobooks and podcasts. Requires Premium Connectivity.

Open your trunk even when your hands are full. Stand still behind your trunk with Phone Key unobstructed, listen for the chimes, and the trunk will open on its own.

To enable this feature, go to your vehicle settings > Locks > Hands-Free Trunk. Ensure your phone settings allow Nearby Interactions for the Tesla app, or open the app and go to Phone Key > Upgrade. Keep people and clothing clear of moving parts.

Requires iPhone 11+ and Tesla app 4.31.0+. A future update will extend this feature to Android users.

When Sentry Mode triggers your vehicle alarm and records an event, you can immediately preview a brief clip of the recording on your phone.

Press and hold the notification to watch the recording. In your vehicle settings, you must have Safety > Dashcam turned on.

Requires a USB with sufficient memory plugged into the vehicle, Tesla app 4.31.5+ on iPhone, and Premium Connectivity. Preview videos are end-to-end encrypted and can't be accessed by Tesla.

Below the turn-by-turn list in your navigation, you'll now see a progress bar that changes as you drive closer to your destination or next stop.

The progress bar also reflects live traffic conditions on your route if you have Online Routing turned on.

For real-time traffic and road conditions to appear on your routes, the setting at Navigation > Online Routing must be turned on. Requires Premium Connectivity.

You can now sync your Spotify queue across vehicles and devices, and adjust playback speed.

Navigation now shows you, at the top of your turn list, if a faster route becomes available. It will reroute unless you decline before the option expires.

To choose how often you see these suggestions, adjust the number of minutes saved.

In your vehicle settings, go to Navigation > Online Routing > Reroute to save. To use this feature, you must have Online Routing turned on.

Scroll Wheel — When you press the wipers button to view wiper controls, you can now adjust wiper speed by moving the left scroll wheel up or down.

Wipers Button — When you have the wipers set to I, II, III, or IIII, you can press the wipers button to cycle through speeds.

- When you're parked, you can expand the browser to full screen.

- Access Car Wash Mode more quickly in vehicle settings > Controls.

- Rear passengers can now see the current trip details, time, and temperature at the top of the rear touchscreen, except when Entertainment apps are using the full screen. (Models with rear screen)

- You can now swipe to delete Sentry Mode recordings in the Dashcam app on your vehicle touchscreen, or at Security > Sentry Mode Alarm Previews in the Tesla app 4.32.0+. (Requires MCU 2)

- When you have Valet Mode on, and your vehicle is unlocked or shifted out of Park, you'll receive a notification on your phone. (Requires Valet Mode)

- The Vampire Survivors game in Arcade now has the "Space 54" and "Deeploreble" updates. (Requires MCU 2)

- Arcade includes the latest game update for Polytopia "Path of the Ocean." (Requires MCU 2)

- If you have no passengers in the back seat, the rear touchscreen now turns off when you shift out of Park, to reduce unnecessary energy use. (Models with rear screen)

- The powered frunk can better detect obstructions just before it finishes closing. (Cybertruck only)

- When you open the door to get in, Cybertruck overhead lights come on at a lower brightness if you have Lights > Dome Lights set to Auto. Tap the lights to adjust them. (Cybertruck only)

Auto Shift (Beta) can now also shift between Drive (D) & Reverse (R) based on your surroundings, in addition to shifting out of Park (P).

Vehicle settings > Pedals & Steering > Auto Shift (Beta)

To hear a chime when you're approaching a speed camera, turn on Navigation > Speed Camera Chime in your vehicle settings.

You must have Online Routing turned on. Requires Premium Connectivity.

When driving through an average speed zone, you now see your average speed in the zone and the distance to the end of it.

You must have Navigation > Online Routing turned on. Requires Premium Connectivity.

High beams now adapt to reduce glare for other drivers and cyclists.

By detecting other road users, and selectively dimming individual pixels of the headlight, your high beams stay on more often for greater visibility at night.

To turn them on, in your vehicle settings go to Lights > Adaptive High Beams.

Editor's note: This applies to vehicles with matrix headlights seen on some of the redesigned Model S and Model X vehicles, as well as the first-gen Model 3 and Model Y. It currently only applies to vehicles in Europe, but Tesla is working on adding support in the U.S.

You can now engage the locking differentials. On uneven or slippery terrain, if a wheel has limited or no traction, Cybertruck will direct torque to the opposite wheel. This helps the vehicle continue moving in low-traction environments.

For off-roading, choose from the locking differential options on the vehicle status area, or in the Off-Road app.

Engaging locking differentials while driving on roads is helpful if you temporarily need extra grip on loose or uneven terrain, such as getting un-stuck from a snow bank. Navigate to Dynamics > Engage Rear Locking Differential.

Use with caution as maneuverability and traction are reduced when turning. Don’t use on high-traction surfaces such as asphalt. Doing so will result in damage to the drivetrain. Refer to the Owner’s Manual before using this feature.

Trail Assist maintains a set cruising speed with minimal slip on rough or steep terrain so you can focus on steering. Adjust the set speed by swiping on the right scroll wheel. Unlike cruise control, when you brake, Trail Assist stays active and resumes the set speed when you release the pedal.

To enable, go to Controls > Dynamics > Off-Road Mode > Trail Assist. This feature won’t steer, navigate, avoid obstacles, stop, or otherwise operate the vehicle on its own. Continue to pay attention and be ready to take immediate action. Refer to the Owner's Manual for more information.

Slippery Surface optimizes Traction Control for driving on snowy, icy, wet, or slick roads to distribute traction evenly across all tires. Even when this setting is off, Cybertruck continuously detects characteristics of the current driving surface and automatically adapts Traction Control.

In your vehicle settings, go to Dynamics > Slippery Surface.

Adaptive suspension now estimates payload more accurately and automatically adjusts damping to deliver a more comfortable ride and more consistent, confident handling. Refer to the Owner's Manual for load limits and requirements.

CyberTent Mode levels the suspension, so you can now sleep comfortably on a flat surface. It keeps the tonneau cover open to accommodate your tent. You won't need a lantern with the lighting controls in the Tesla app, and Outlets stay on if enabled. Go to Outlets & Mods in your vehicle settings, or Controls in the Tesla app. The CyberTent is only available in the Tesla Shop (shop.tesla.com).

- Overland Mode now provides more consistent handling and better overall traction while driving on rock, gravel, deep snow, or sand.

- Baja Mode now improves vehicle balance and handles more freely when Stability Assist is set to Minimal.

Baja Mode now includes a Terrain slider for optimized performance in a variety of off-road scenarios:

- Smooth: Medium ride height and increases damping for excellent body control and responsive handling.

- Rugged: High ride height with damping optimized for rough terrain, medium sized obstacles, and whoops.

- Clearance: Very High ride height for traversing large obstacles.

Drive your own kart racer in an action-packed race to the finish. Careen through Egyptian pyramids, dragon-infested castles, pirate shipwrecks, and experimental alien bio-labs. Blast your opponents with an arsenal of fun and wacky Powerups.

When you play games, Cybertruck's steer-by-wire system lets you turn the steering wheel without moving the tires.

To play, go to your vehicle settings > Entertainment > Arcade > Beach Buggy Racing 2.

For hot days or parking in direct sun, Cabin Overheat Protection helps maintain the temperature you set for up to 12 hours after you park. It will turn off at 20% battery to conserve range.

In your vehicle settings, go to Safety > Cabin Overheat Protection. Never leave children or pets unattended.

Do more with the left scroll button on the steering wheel. You can perform actions like raise or lower ride height, open the glovebox, or save Dashcam footage, and adjust settings like brightness and drive mode.

Press and hold the left scroll button to open the menu and choose a function. Next time, the button will perform the most recent function you chose.

To choose a function any time you use this feature, go to vehicle settings > Display > Scroll Wheel Function, and choose Ask Each Time.

Customize how your Cybertruck appears on the touchscreen and Tesla app.

In your vehicle settings, go to ToyBox > Colorizer.

Your Cybertruck's turning circle is improved by 1.6 feet, making parking and low-speed maneuvers easier. This is achieved by an increase in the turning angle of the front and rear wheels.

You can now open or close the front passenger air vent separately, with the rest of your vehicle Climate still on.

Tap the temperature to open Climate controls, touch the front passenger air wave on the touchscreen, and follow the instructions.

You'll hear new signature sounds from your Cybertruck when you lock and unlock.

You can enable or disable the sounds in your vehicle settings at Locks > Lock Confirmation Sound.

Attend video calls with Zoom using the interior cabin camera.

Open the app directly, or join meetings from your Calendar. Shift to Park to use participant video and screen sharing. If you drive, then meetings switch to audio only.

Driver has sole responsibility to consult and comply with all local regulations while using Zoom. Requires Premium Connectivity.

This update includes important security fixes and improvements.

The status bar icons have been rearranged when parked so that the driver profile, WiFi and Sentry Mode icons are closer to the driver and the time and temperature readings are further to the right.

The Auto Shift user interface has been updated to be more compact so that it doesn't take up the entire left side of the screen.

It now leaves room above for the gear indicator, and doesn't go all the way down to allow for a larger media player.

There’s a new media player that’s larger and easier to use. By increasing the size of the media player, Tesla is now able to fit additional options that were hidden previously, such as EQ and audio settings, the search button and shuffle and repeat options.

The new media player appears while the vehicle is parked, driving or while the visualizations are in full-screen mode.

The media player can be minimized as before, but it now remains in the visualization area as a small strip incase of going down into the dock.

While your vehicle is charging, the screen will now display additional information about the vehicle's charging status.

It includes the charge limit, current power, total energy added, number of phases, and the current amperage and voltage.

There is also a new animation on the left side where the new power meter appears while driving. This vertical line mimics the vertical green lights on Tesla's Wall Connector that scroll up and down while the vehicle is charging.

In the vehicle's new visualization, after you tap Open Trunk, you'll now be given the option to "Pause" the trunk opening so that it remains open to the current height.

This could be useful when opening the trunk where there may not be enough overhead space.

You can always set the maximum height for the trunk to open, limiting how far the trunk lid goes up whenever you're at that specific location.

The font size of the speedometer has been increased, making it easier to see.

While in full-screen, the regen bar is now placed vertically along the left side of the screen istead of horizontally on top.

User Interface v12 elevates your visual experience with the following updates:

- Immersive full-screen vehicle controls when you're parked

- Large playback controls and quick access to Recents, Favorites, and Up Next in the media player

- Expandable Autopilot driving visualizations, with a smaller map in the top right for trip guidance

- A sleeker and more compact drive mode strip and refined driving readouts

Listen to thousands of Audible Originals, audiobooks, and podcasts. Pick up where you left off and listen seamlessly between your device and Tesla.

Scan the QR code to log in to your Audible account, or try it out with a selection of free audiobooks and podcasts. Requires Premium Connectivity.

Open your trunk even when your hands are full. Stand still behind your trunk with Phone Key unobstructed, listen for the chimes, and the trunk will open on its own.

To enable this feature, go to your vehicle settings > Locks > Hands-Free Trunk. Ensure your phone settings allow Nearby Interactions for the Tesla app, or open the app and go to Phone Key > Upgrade. Keep people and clothing clear of moving parts.

Requires iPhone 11+ and Tesla app 4.31.0+. A future update will extend this feature to Android users.

When Sentry Mode triggers your vehicle alarm and records an event, you can immediately preview a brief clip of the recording on your phone.

Press and hold the notification to watch the recording. In your vehicle settings, you must have Safety > Dashcam turned on.

Requires a USB with sufficient memory plugged into the vehicle, Tesla app 4.31.5+ on iPhone, and Premium Connectivity. Preview videos are end-to-end encrypted and can't be accessed by Tesla.

Below the turn-by-turn list in your navigation, you'll now see a progress bar that changes as you drive closer to your destination or next stop.

The progress bar also reflects live traffic conditions on your route if you have Online Routing turned on.

For real-time traffic and road conditions to appear on your routes, the setting at Navigation > Online Routing must be turned on. Requires Premium Connectivity.

You can now sync your Spotify queue across vehicles and devices, and adjust playback speed.

Navigation now shows you, at the top of your turn list, if a faster route becomes available. It will reroute unless you decline before the option expires.

To choose how often you see these suggestions, adjust the number of minutes saved.

In your vehicle settings, go to Navigation > Online Routing > Reroute to save. To use this feature, you must have Online Routing turned on.

Scroll Wheel — When you press the wipers button to view wiper controls, you can now adjust wiper speed by moving the left scroll wheel up or down.

Wipers Button — When you have the wipers set to I, II, III, or IIII, you can press the wipers button to cycle through speeds.

- When you're parked, you can expand the browser to full screen.

- Access Car Wash Mode more quickly in vehicle settings > Controls.

- Rear passengers can now see the current trip details, time, and temperature at the top of the rear touchscreen, except when Entertainment apps are using the full screen. (Models with rear screen)

- You can now swipe to delete Sentry Mode recordings in the Dashcam app on your vehicle touchscreen, or at Security > Sentry Mode Alarm Previews in the Tesla app 4.32.0+. (Requires MCU 2)

- When you have Valet Mode on, and your vehicle is unlocked or shifted out of Park, you'll receive a notification on your phone. (Requires Valet Mode)

- The Vampire Survivors game in Arcade now has the "Space 54" and "Deeploreble" updates. (Requires MCU 2)

- Arcade includes the latest game update for Polytopia "Path of the Ocean." (Requires MCU 2)

- If you have no passengers in the back seat, the rear touchscreen now turns off when you shift out of Park, to reduce unnecessary energy use. (Models with rear screen)

- The powered frunk can better detect obstructions just before it finishes closing. (Cybertruck only)

- When you open the door to get in, Cybertruck overhead lights come on at a lower brightness if you have Lights > Dome Lights set to Auto. Tap the lights to adjust them. (Cybertruck only)

Auto Shift (Beta) can now also shift between Drive (D) & Reverse (R) based on your surroundings, in addition to shifting out of Park (P).

Vehicle settings > Pedals & Steering > Auto Shift (Beta)

To hear a chime when you're approaching a speed camera, turn on Navigation > Speed Camera Chime in your vehicle settings.

You must have Online Routing turned on. Requires Premium Connectivity.

When driving through an average speed zone, you now see your average speed in the zone and the distance to the end of it.

You must have Navigation > Online Routing turned on. Requires Premium Connectivity.

High beams now adapt to reduce glare for other drivers and cyclists.

By detecting other road users, and selectively dimming individual pixels of the headlight, your high beams stay on more often for greater visibility at night.

To turn them on, in your vehicle settings go to Lights > Adaptive High Beams.

Editor's note: This applies to vehicles with matrix headlights seen on some of the redesigned Model S and Model X vehicles, as well as the first-gen Model 3 and Model Y. It currently only applies to vehicles in Europe, but Tesla is working on adding support in the U.S.

You can now engage the locking differentials. On uneven or slippery terrain, if a wheel has limited or no traction, Cybertruck will direct torque to the opposite wheel. This helps the vehicle continue moving in low-traction environments.

For off-roading, choose from the locking differential options on the vehicle status area, or in the Off-Road app.

Engaging locking differentials while driving on roads is helpful if you temporarily need extra grip on loose or uneven terrain, such as getting un-stuck from a snow bank. Navigate to Dynamics > Engage Rear Locking Differential.

Use with caution as maneuverability and traction are reduced when turning. Don’t use on high-traction surfaces such as asphalt. Doing so will result in damage to the drivetrain. Refer to the Owner’s Manual before using this feature.

Trail Assist maintains a set cruising speed with minimal slip on rough or steep terrain so you can focus on steering. Adjust the set speed by swiping on the right scroll wheel. Unlike cruise control, when you brake, Trail Assist stays active and resumes the set speed when you release the pedal.

To enable, go to Controls > Dynamics > Off-Road Mode > Trail Assist. This feature won’t steer, navigate, avoid obstacles, stop, or otherwise operate the vehicle on its own. Continue to pay attention and be ready to take immediate action. Refer to the Owner's Manual for more information.

Slippery Surface optimizes Traction Control for driving on snowy, icy, wet, or slick roads to distribute traction evenly across all tires. Even when this setting is off, Cybertruck continuously detects characteristics of the current driving surface and automatically adapts Traction Control.

In your vehicle settings, go to Dynamics > Slippery Surface.

Adaptive suspension now estimates payload more accurately and automatically adjusts damping to deliver a more comfortable ride and more consistent, confident handling. Refer to the Owner's Manual for load limits and requirements.

CyberTent Mode levels the suspension, so you can now sleep comfortably on a flat surface. It keeps the tonneau cover open to accommodate your tent. You won't need a lantern with the lighting controls in the Tesla app, and Outlets stay on if enabled. Go to Outlets & Mods in your vehicle settings, or Controls in the Tesla app. The CyberTent is only available in the Tesla Shop (shop.tesla.com).

- Overland Mode now provides more consistent handling and better overall traction while driving on rock, gravel, deep snow, or sand.

- Baja Mode now improves vehicle balance and handles more freely when Stability Assist is set to Minimal.

Baja Mode now includes a Terrain slider for optimized performance in a variety of off-road scenarios:

- Smooth: Medium ride height and increases damping for excellent body control and responsive handling.

- Rugged: High ride height with damping optimized for rough terrain, medium sized obstacles, and whoops.

- Clearance: Very High ride height for traversing large obstacles.

Drive your own kart racer in an action-packed race to the finish. Careen through Egyptian pyramids, dragon-infested castles, pirate shipwrecks, and experimental alien bio-labs. Blast your opponents with an arsenal of fun and wacky Powerups.

When you play games, Cybertruck's steer-by-wire system lets you turn the steering wheel without moving the tires.

To play, go to your vehicle settings > Entertainment > Arcade > Beach Buggy Racing 2.

For hot days or parking in direct sun, Cabin Overheat Protection helps maintain the temperature you set for up to 12 hours after you park. It will turn off at 20% battery to conserve range.

In your vehicle settings, go to Safety > Cabin Overheat Protection. Never leave children or pets unattended.

Do more with the left scroll button on the steering wheel. You can perform actions like raise or lower ride height, open the glovebox, or save Dashcam footage, and adjust settings like brightness and drive mode.

Press and hold the left scroll button to open the menu and choose a function. Next time, the button will perform the most recent function you chose.

To choose a function any time you use this feature, go to vehicle settings > Display > Scroll Wheel Function, and choose Ask Each Time.

Customize how your Cybertruck appears on the touchscreen and Tesla app.

In your vehicle settings, go to ToyBox > Colorizer.

Your Cybertruck's turning circle is improved by 1.6 feet, making parking and low-speed maneuvers easier. This is achieved by an increase in the turning angle of the front and rear wheels.

You can now open or close the front passenger air vent separately, with the rest of your vehicle Climate still on.

Tap the temperature to open Climate controls, touch the front passenger air wave on the touchscreen, and follow the instructions.

You'll hear new signature sounds from your Cybertruck when you lock and unlock.

You can enable or disable the sounds in your vehicle settings at Locks > Lock Confirmation Sound.

Attend video calls with Zoom using the interior cabin camera.

Open the app directly, or join meetings from your Calendar. Shift to Park to use participant video and screen sharing. If you drive, then meetings switch to audio only.

Driver has sole responsibility to consult and comply with all local regulations while using Zoom. Requires Premium Connectivity.

This update includes important security fixes and improvements.

The status bar icons have been rearranged when parked so that the driver profile, WiFi and Sentry Mode icons are closer to the driver and the time and temperature readings are further to the right.

The Auto Shift user interface has been updated to be more compact so that it doesn't take up the entire left side of the screen.

It now leaves room above for the gear indicator, and doesn't go all the way down to allow for a larger media player.

There’s a new media player that’s larger and easier to use. By increasing the size of the media player, Tesla is now able to fit additional options that were hidden previously, such as EQ and audio settings, the search button and shuffle and repeat options.

The new media player appears while the vehicle is parked, driving or while the visualizations are in full-screen mode.

The media player can be minimized as before, but it now remains in the visualization area as a small strip incase of going down into the dock.

While your vehicle is charging, the screen will now display additional information about the vehicle's charging status.

It includes the charge limit, current power, total energy added, number of phases, and the current amperage and voltage.

There is also a new animation on the left side where the new power meter appears while driving. This vertical line mimics the vertical green lights on Tesla's Wall Connector that scroll up and down while the vehicle is charging.

In the vehicle's new visualization, after you tap Open Trunk, you'll now be given the option to "Pause" the trunk opening so that it remains open to the current height.

This could be useful when opening the trunk where there may not be enough overhead space.

You can always set the maximum height for the trunk to open, limiting how far the trunk lid goes up whenever you're at that specific location.

The font size of the speedometer has been increased, making it easier to see.

While in full-screen, the regen bar is now placed vertically along the left side of the screen istead of horizontally on top.