Update 2025.2.8.1 - Release Notes

Pressing and holding the wiper wash button now dispenses additional fluid after the second cycle, helping to clean stubborn contaminants more effectively.

Στο τέλος της οδήγησής σας, θα λάβετε μια ειδοποίηση εάν ανιχνευτεί κακή ορατότητα της κάμερας. Για να δείτε αυτές τις εικόνες, μεταβείτε στο Σέρβις > Ορατότητα κάμερας.

Οι εικόνες δεν εγκαταλείπουν το όχημα και δεν κοινοποιούνται εκτός εάν το επιτρέπουν οι προτιμήσεις της Κοινής χρήσης δεδομένων. Διαγράφονται αυτόματα μετά από δύο ημέρες. Για να ελέγξετε τις ρυθμίσεις της Κοινής χρήσης δεδομένων, μεταβείτε στο Λογισμικό > Κοινή χρήση δεδομένων.

FSD (Supervised) v12.6.4 contains significant enhancements to the end-to-end architecture for HW3.

Includes:

- End to End on Highway

- Improved City Streets Behavior, which reduces false slowdowns and improves obstacle avoidance

- Customizable Speed Profiles, which apply to roads and highways with 50mph (80kph) or higher speed limit

- Earlier and more natural lane change decisions

- Redesigned controller for smoother, more accurate tracking

- Max Speed Update, where Autopilot determines the suitable speed within your allowed limit

Editorial note: This version of FSD notes are for hardware 3 vehicles and differ from what's available for hardware 4 models. These release notes remain the same from the previous version.

FSD (Supervised) v13 upgrades every part of the end-to-end driving network.

Includes:

- 36 Hz, full-resolution AI4 video inputs

- Native AI4 inputs and neural network architectures

- 4.2x data scaling

- 5x training compute scaling (enabled by the Cortex cluster)

- Reduced photon-to-control latency by 2x

- Speed Profiles on both City Streets and Highways

- Integrated unpark, reverse, and park capabilities

- Improved reward predictions for collision avoidance

- Improved camera cleaning

- Redesigned controller for smoother, more accurate tracking

- Dynamic routing around road closures, which displays them along an affected route when they are detected by the fleet

Upcoming Improvements:

- 3x model size scaling

- 3x model context length scaling

- Audio inputs for better handling of emergency vehicles

- Improved reward predictions for navigation

- Improvements to false braking and slower driving in parking lots

- Support for destination options including pulling over, parking in a spot, driveway, or garage

- Efficient representation of maps and navigation inputs

- Improved handling of camera occlusions

Editorial note: This version of FSD notes are for all hardware 4 vehicles, except for the Cybertruck. They differ from what's available for HW3 vehicles and for the Cybertruck. These release notes remain the same from the previous version.

FSD (Supervised) v13 upgrades every part of the end-to-end driving network.

Includes:

- 36 Hz, full-resolution AI4 video inputs

- Native AI4 inputs and neural network architectures

- 4.2x data scaling

- 5x training compute scaling (enabled by the Cortex cluster)

- Reduced photon-to-control latency by 2x

- Speed Profiles on both City Streets and Highways

- Improved reward predictions for collision avoidance

- Dynamic routing around road closures, which displays them along an affected route when they are detected by the fleet

Upcoming Improvements:

- 3x model size scaling

- 3x model context length scaling

- Integrated unpark, reverse, and park capabilities

- Audio inputs for better handling of emergency vehicles

- Improved reward predictions for navigation

- Improvements to false braking and slower driving in parking lots

- Redesigned controller for smoother, more accurate tracking

- Support for destination options including pulling over, parking in a spot, driveway, or garage

- Efficient representation of maps and navigation inputs

- Improved camera cleaning and handling of camera occlusions

Editorial note: This version of FSD notes are for the Cybertruck, which differs slightly from other hardware 4 models. Some features such as Start from Park are not yet available for the Cybertruck. These release notes remain the same from the previous version.

Όταν είναι ενεργοποιημένο, ένα κουμπί θα εμφανιστεί στον χάρτη όταν πληρούνται οι απαιτήσεις του οδηγού και πατηθεί και αφεθεί το πεντάλ του φρένου. Οι απαιτήσεις του οδηγού περιλαμβάνουν (ενδεικτικά):

- Ο οδηγός κάθεται στη θέση του οδηγού

- Ο οδηγός είναι δεμένος

- Η Κάμερα καμπίνας είναι ανεμπόδιστη

Όταν η Επιβεβαίωση πέδησης είναι απενεργοποιημένη, το πάτημα του κουμπιού θα δώσει τη δυνατότητα στο Autopilot να πατήσει τα φρένα και να ενεργοποιήσει το FSD (με επίβλεψη).

Μπορείτε να ενεργοποιήσετε αυτήν τη δυνατότητα στο Autopilot > Έναρξη FSD (με επίβλεψη) από τη θέση Park.

Αυτή η δυνατότητα δεν καθιστά το όχημά σας αυτόνομο και πρέπει να παραμείνετε προσεκτικοί και να είστε έτοιμοι να αναλάβετε τον έλεγχο ανά πάσα στιγμή. Μόνο ένας οδηγός με άδεια που είναι εξουσιοδοτημένος να χειρίζεται το όχημα θα πρέπει να έχει πρόσβαση στη θέση του καθίσματος του οδηγού κάθε φορά που το όχημα δεν βρίσκεται σε λειτουργία Theater ή Arcade.

Under your supervision, Full Self-Driving (Supervised) can drive your Tesla almost anywhere. It will make lane changes, select forks to follow your navigation route, navigate around other vehicles and objects, and make left and right turns. You and anyone you authorize must use additional caution and remain attentive. It does not make your vehicle autonomous. Do not become complacent.

Full Self-Driving (Supervised) is enabled on your vehicle. To use the feature, pull the drive stalk down once. You can disable Full Self-Driving (Supervised) in Autopilot Settings.

Βελτιώστε τις λειτουργίες ασφάλειας και άνεσης του οχήματός σας, όπως η αναγνώριση σειρήνας, επιλέγοντας να επιλέξετε και να κοινοποιείτε δεδομένα ανίχνευσης ήχου στην Tesla. Μια σύντομη εγγραφή ήχου συλλέγεται όταν αναγνωρίζεται ένα όχημα έκτακτης ανάγκης που πλησιάζει.

Μπορείτε να αλλάξετε τις προτιμήσεις για κοινή χρήση δεδομένων ανά πάσα στιγμή. Ακόμα και αν επιλέξετε, τα δεδομένα ανίχνευσης ήχου δεν σχετίζονται με τον λογαριασμό σας ή το VIN σας.

The first-row cabin sensing system has been updated to use cabin radar, which is now standard in all new 2025 Model Ys. Your Model Y was built pre-equipped with the necessary hardware, allowing Tesla to also bring this technology to your vehicle.

Το όχημά σας υποστηρίζει πλέον προετοιμασία για πρόσθετους ταχυφορτιστές τρίτου κατασκευαστή, ακόμα κι αν δεν περιλαμβάνονται στη λίστα φορτιστών. Απλά ορίστε έναν ταχυφορτιστή ως προορισμό σας και η προετοιμασία της μπαταρίας θα ξεκινήσει αυτόματα όταν χρειάζεται για να βελτιστοποιήσει την απόδοση της φόρτισης.

Όταν αλλάζετε σε Όπισθεν, θα ακούγεται ένας προειδοποιητικός ήχος από την κατεύθυνση ενός διερχόμενου αντικειμένου που ανιχνεύεται να περνά πίσω σας, όπως ένα όχημα ή ένας πεζός.

Μεταβείτε στα Χειριστήρια > Ασφάλεια > Ήχος διερχόμενης κυκλοφορίας πίσω

Already available on iPhones, this feature is now supported on Android phones, making it easier to open the trunk when your hands are full. Simply stand near the desired area with your Phone Key unobstructed, listen for the chimes, and the trunk will open automatically. Ensure people and clothing are clear of moving parts. Requires Tesla app version 4.41.0 or later.

To enable this feature, go to Controls > Locks > Hands-Free Trunk on your vehicle's touchscreen. On your UWB supported phone, go to settings and enable Nearby or Ultra-Wideband (UWB) Interactions for the Tesla app, or go to Phone Key > Upgrade.

Already available on iPhones, this feature is now supported on Android phones, making it easier to open the trunk or frunk when your hands are full. Simply stand near the desired area with your Phone Key unobstructed, listen for the chimes, and the trunk or frunk will open automatically. Ensure people and clothing are clear of moving parts. Requires Tesla app version 4.41.0 or later.

To enable this feature, go to Controls > Locks > Hands-Free Frunk or Trunk on your vehicle's touchscreen. On your UWB supported phone, go to settings and enable Nearby or Ultra-Wideband (UWB) Interactions for the Tesla app, or go to Phone Key > Upgrade.

Already available on iPhones, this feature is now supported on Android phones, making it easier to open the trunk when your hands are full. Simply stand near the desired area with your Phone Key unobstructed, listen for the chimes, and the frunk will open automatically. Ensure people and clothing are clear of moving parts. Requires Tesla app version 4.41.0 or later.

To enable this feature, go to Controls > Locks > Hands-Free Frunk on your vehicle's touchscreen. On your UWB supported phone, go to settings and enable Nearby or Ultra-Wideband (UWB) Interactions for the Tesla app, or go to Phone Key > Upgrade.

Trailer Profiles allows you to save data and preferences associated with your trailer. By accurately entering your trailer's mass, dimensions, auxiliary settings, etc., your vehicle is better able to estimate energy consumption while driving to your destination.

To create a profile, navigate to Controls > Towing > Trailer Profiles.

- Weather information is now displayed for both the final destination and the waypoints in your route’s turn-by-turn list.

- The Battle of Polytopia - "The Forgotten" Aquarion Skin - This update comes with a new Aquarion skin, new languages, and balance changes.

- Minor fixes and performance enhancements have been applied.

- This update includes important security fixes and improvements.

Tesla has now carried over some of the updated warnings from FSD to regular Autopilot.

Warnings such as “Autopilot will not brake” when the accelerator pedal is actively pressed and others will now be presented at the top in a translucent rectangle, instead of near the bottom, where they can be easily missed.

After using a Supercharger, your vehicle will now display a notification with the total cost of the charging session. In the addition to the cost, the alert will also display the location, total energy added and the cost per kW/h.

The Tire Pressure card on the Model 3 and Model Y will now show you the recommended tire pressure in addition to your existing tire pressure reading.

Brake Burnishing: The Brake Burnish procedure parameters have been updated to reduce the need for coming to almost a complete stop during each cycle.

Legacy Model S and Model X.

Charge Port Calibration: The charge port door calibration routine (PROC_CP_X_DOOR-SENSOR-CALIBRATION) and charge port latch calibration route (PROC_CP_X_LATCH-CALIBRATION) have been added to the Charging panel. Those routines are required to be run following the replacement of the charge port or charge port door.

All Model 3s and Model Ys.

Signal Viewer Panel: A new Signal Viewer panel is available to monitor multiple signal values live on a graph. If one or more of the signal values is unavailable, the graph will stop updating. To access the new panel, tap Tools > Signal Viewer.

All vehicles with AMD Ryzen.

Noise Recording Panel: To improve the user experience, the recording duration has been decreased to 30 seconds, and reliability of the download routine PROC_ICE_X_FETCH-DIAGNOSTIC-AUDIO-RECORDS has been improved.

Cybertruck only.