Navigeren met Autopilot stelt op intelligentie wijze rijstrookwisselingen voor om u op uw route te houden en voert aanpassingen door om te voorkomen dat u achter langzaam rijdende auto's of vrachtwagens moet blijven rijden.

Schakel Navigeren met Autopilot in door naar Bediening > Autopilot te gaan en eerst Stuurautomaat in te schakelen. Voor iedere route waarvoor de functie beschikbaar is, hebt u de mogelijkheid om deze in of uit te schakelen door op de toets NAVIGEREN MET AUTOPILOT te drukken in de navigatielijst.

Zodra Navigeren met Autopilot is ingeschakeld voor uw route, kunt u de functie activeren op autowegen en autosnelwegen door de schakelhendel twee keer snel achter elkaar volledig omlaag te bewegen. Als de functie is geactiveerd geeft een blauwe lijn het voorliggende traject aan en wordt uw auto in de juiste rijstrook gehouden. Grijze lijnen kunnen worden weergegeven om aankomende wisseling van rijstrook op basis van uw route aan te geven of mogelijkheden voor te stellen om te wisselen naar een inhaalstrook. Als Navigeren met Autopilot actief is, leidt de functie uw auto ook naar afritten en opritten van snelwegen op basis van uw bestemming.

U kunt instellen in welke mate Navigeren met Autopilot van rijstrook wisselt om de ingestelde snelheid van uw auto aan te houden. Dit doet u door de instelling WISSELEN VAN RIJSTROOK OP BASIS VAN SNELHEID te wijzigen onder Bediening > Autopilot > NAVIGEREN MET AUTOPILOT AANPASSEN.

Opmerking: Voordat deze functie kan worden ingeschakeld, moet een camerakalibratie worden uitgevoerd en moeten de nieuwste kaarten voor het navigatiesysteem worden gedownload via wifi.

De Tesla Toybox heeft een nieuw ontwerp gekregen dat bekijken en spelen makkelijker maakt. Blader gewoon door de toys en pas de bijbehorende bedieningselementen aan. Tik net zoals eerst op het Toybox-pictogram in de Application Launcher om de Tesla Toybox te openen.

De lijst met oplaadpunten is verbeterd zodat oplaadpunten nu gemakkelijk kunnen worden gefilterd op basis van het maximumvermogen. Tik gewoon op het oplaadpictogram op de kaart en filter de oplaadpunten door de bijbehorende bliksemschichtpictogrammen te selecteren.

U kunt nu direct op de labels op de kaart tikken om snel de details van een plaats te bekijken en naar deze bestemming te navigeren.

Dashcam is nu gemakkelijker in te stellen of te wissen. Tik na het aansluiten van een USB-stick op Bediening > Veiligheid en beveiliging > USB-APP. FORMATT om de stick te formatteren en de bijbehorende mappen voor Dashcam aan te maken. Opmerking: Bij het formatteren van de USB-stick worden ook eventuele bestaande clips gewist.

Backgammon spelen tegen uw Tesla is nu moeilijker geworden. Het moeilijkste niveau is nu getraind met meer dan 20 miljoen spellen. Daag uw Tesla uit voor een spel door op de Application Launcher en vervolgens op Entertainment > Arcade > Backgammon te tikken. Opmerking: Zoals gewoonlijk is de Tesla Arcade alleen beschikbaar wanneer uw auto in de P-stand staat.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

- Improved short-deadline lane changes, to avoid going off-route, through better modeling of target lane vehicles to improve gap selection assertiveness.

- Improved offset consistency when controlling for static obstacles. Also improved smoothness when changing offset direction by adjusting speed more comfortably.

- Improved handling of oncoming cars on narrow unmarked roads by improving prediction of oncoming car's trajectory and leaving enough room for them to pass before re-centering.

- Improved Occupancy Flow prediction from the Occupancy Network for arbitrary moving obstacles by 8%.

- Expanded usage of the new object ground truth autolabeler for the NonVRU detection model, improving distant vehicle recall and geometry precision for semi-trucks, trailers, and exotic vehicles.

- Improved VRU control by expanding planning scope to control gently for low-confidence detections that may interfere with ego's path.

- Improved handling for VRUs near crosswalks by predicting their future intent more accurately. This was done by leveraging more kinematic data to improve association between crosswalks and VRUs.

- Improved ego's behavior near VRUs by tuning their assumed kinematic properties and utilizing available semantic information to classify more accurately their probability of intersecting ego's path.

- Improved Automatic Emergency Braking recall in response to cut-in vehicles and vehicles behind ego while reversing.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.