Verkeerslicht- en stopbordherkenning is bedoeld om verkeerslichten en stopborden te herkennen en erop te reageren door de auto te laten vertragen en stoppen wanneer Traffic-Aware Cruise Control of Automatisch sturen is ingeschakeld. Deze functie laat de auto vertragen voor alle gedeteceerde verkeerslichten, waaronder groene lichten, knipperlichten en uitgeschakelde lichten. Als de auto een kruispunt nadert, geeft de auto via een melding de bedoeling om te vertragen aan, vertraagt en stopt bij de rode lijn die in de rijvisualisatie wordt getoond.

Om voorbij de stoplijn te rijden, trekt u aan de Autopilot-hendel of drukt u kort het gaspedaal in om te bevestigen dat het veilig is om door te rijden. Zoals bij alle Autopilot-functies moet u blijven opletten en klaar zijn om onmiddellijk actie te ondernemen zoals remmen, omdat deze functie mogelijk niet voor verkeerslichten of stopborden stopt. Deze functie is behoudend, waardoor aanvankelijk vaak wordt vertraagd en de auto niet probeert door te rijden bij kruispunten. Na verloop van tijd leren we bij van het wagenpark en werkt de functie natuurlijker.

Om voorbij de stoplijn te rijden, drukt u de selectiehendel omlaag of drukt u kort het gaspedaal in om te bevestigen dat het veilig is om door te rijden. Zoals bij alle Autopilot-functies moet u blijven opletten en klaar zijn om onmiddellijk actie te ondernemen zoals remmen, omdat deze functie mogelijk niet voor verkeerslichten of stopborden stopt. Deze functie is behoudend, waardoor aanvankelijk vaak wordt vertraagd en de auto niet probeert door te rijden bij kruispunten. Na verloop van tijd leren we bij van het wagenpark en werkt de functie natuurlijker.

U schakelt de functie in door de auto in de P-stand (Park) te zetten en op Bediening > Autopilot > Verkeerslicht- en stopbordherkenning (bèta) te tikken.

Opmerking: Als deze functie is ingeschakeld, is de maximale ins

De rijvisualisatie kan nu extra objecten weergeven, waaronder stoplichten, stopborden en bepaalde wegmarkeringen selecteren. De visualisaties van stopborden en verkeerslichten zijn geen vervanging voor een oplettende bestuurder en stoppen de auto niet. Om deze extra objecten in uw rijvisualisatie te zien, tikt u op Bediening > Autopilot > Volledig zelfrijdend visualisatievoorbeeld.

De rijvisualisatie toont nu verkeerskegels. Wanneer een verkeerskegel wordt gedetecteerd en Navigeren met Autopilot is ingeschakeld, zal het voertuig een rijstrookwisseling voorstellen (of een rijstrookwisseling proberen uit te voeren als BEVESTIGING WISSELEN VAN RIJSTROOK VEREIST is ingesteld op NEE) om kegels te ontwijken. Zoals steeds bent u verantwoordelijk voor uw voertuig en moet u te allen tijde attent blijven.

De rijvisualisatie toont nu verkeerskegels. Wanneer een verkeerskegel wordt gedetecteerd en Navigeren met Autopilot is ingeschakeld, stelt het voertuig een rijstrookwisseling voor om kegels te ontwijken. Zoals steeds bent u verantwoordelijk voor uw voertuig en moet u te allen tijde attent blijven.

De rijvisualisatie toont nu verkeerskegels.

Bekijk opgeslagen dashcamclips of gebeurtenissen van de Bewakingsmodus op het touchschreen met de Dashcam Viewer. Om deze te starten, tikt u op het dashcampictogram in de statusbalk en selecteert u "Viewer starten" terwijl de auto in de stand P (Park) staat. Als de auto in de stand D (Drive) staat, kunt u een clip nog steeds opslaan door op het pictogram te tikken.

Als u clips en gebeurtenissen wilt bekijken die zijn opgeslagen op uw USB-stick, tikt u op het menupictogram in de linkerbovenhoek van de viewer. Elke video is gerangschikt op locatie, datum en miniatuur voor gemakkelijke toegang. Tik op de tabbladen "Dashcam" of "Bewaking" voor aanvullende filteropties.

Selecteer een clip of gebeurtenis om de overeenkomstige video af te spelen. Als u een video van een bepaalde camera wilt selecteren, tikt u op de bijbehorende miniatuur, aangeduid met Voor, Achter, Links of Rechts. Afspelen, pauzeren of scrollen door video's kan met de videobedieningsknoppen onder aan de speler. Als u een video wilt verwijderen, tikt op het prullenbakpictogram rechts onder in de videospeler.

Launch Mode is verbeterd met aandrijflijnverbeteringen die de acceleratieprestaties en de herhaalbaarheid verbeteren. Voor een betere tractie neemt de adaptieve vering een "cheeta-houding" aan (verlagen van de vooras) en wordt de demping afgesteld.

Om Launch Mode te starten, schakelt u eerst Insane+ acceleratie in door te tikken op Bediening > Rijden > Acceleratie > Insane+ en volgt u de instructies die worden weergegeven wanneer u op de link "Gebruik van Launch Mode" tikt.

Om Launch Mode te starten, schakelt u eerst Ludicrous+ acceleratie in door te tikken op Bediening > Rijden > Acceleratie > Ludicrous+ en volgt u de instructies die worden weergegeven wanneer u op de link "Gebruik van Launch Mode" tikt.

Supercharger-stations geven nu het aantal laadpalen aan dat buiten bedrijf is. Tik op de speld van het Supercharger-station op de kaart om de huidige beschikbaarheid te bekijken.

Your vehicle alarm now also monitors whether your trailer is plugged in to the hitch.

The trailer alarm sets and turns off along with your vehicle alarm. You can disable this security feature in your vehicle settings at Towing and Hauling > Trailer Alarm.

Ultrawide band (UWB) technology is now available for Phone Key. Your vehicle and Phone Key can communicate with greater accuracy to more responsively lock, unlock, and extend Auto-Present Handles.

In the Tesla app, choose Phone Key > Upgrade and follow the instructions. After setup, keep your iPhone Settings for Nearby Interactions on for Tesla. Requires iPhone 11+ and Tesla app 4.31.0+.

If you're planning a road trip, you can choose the One-Time Charge option.

This option appears when you increase the Charge Limit above the daily driving recommendation.

Afterward your vehicle will automatically revert back to your previous daily driving Charge Limit.

To see the number of miles traveled since your last tire service, in your vehicle settings go to Service and look in the upper right corner. When you get your tires rotated, replaced, or swapped, choose Reset to zero out the counter.

Passengers in the back seat can listen on wireless Bluetooth headphones when watching shows or playing games on the rear touchscreen. The rest of the vehicle can continue to listen to other audio from the front.

Pair your headphones at App Launcher > Rear Display > Settings > Add New Device. To listen, turn on the headphones (up to two), open an app in Theater or Arcade on the rear screen, and hit play.

Wipers now have an Auto setting that detects precipitation and adjusts the wiping speed and intensity.

Turning on Autopilot features automatically sets wipers to Auto.

Navigation now includes symbols along your route to show danger zones.

To see this route information you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

High beams now adapt to reduce glare for other drivers and cyclists.

By detecting other road users, and selectively dimming individual pixels of the headlight, your high beams stay on more often for greater visibility at night.

To turn them on, in your vehicle settings go to Lights > Adaptive High Beams.

Editor's note: This applies to vehicles with matrix headlights seen on some of the redesigned Model S and Model X vehicles, as well as the first-gen Model 3 and Model Y. It currently only applies to vehicles in Europe, but Tesla is working on adding support in the U.S.

Navigation now includes symbols along your route to show speed cameras.

To see this route information, you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

This update includes important security fixes and improvements.

The nozzle that sprays your windshield when the left stalk or steering wheel button (model dependent) is held down previously only sprayed the windshield when the wipers were in the lower position.

With this update, the nozzle will spray the windshield any time the button is held for a brief period, regardless of the wiper's position.

The Fold Mirrors button under Controls has been updated to have multiple states. The mirror now has four states:

Fold Mirrors: This button will fold your mirrors and then briefly change to 'Save Location.'

Save Location: If your mirrors were recently folded, then you'll be presented with a Save Location button that will cause the vehicle to always fold its mirrors when it arrives near this location.

Remove Location: If your mirrors are set to be folded at the current location, the button will change to 'Remove Location," letting you remove the automatic folding of the mirrors at this location.

Unfold Mirrors: If your mirrors are currently folded, but not set to fold automatically based on the location, then the button will simply display 'Unfold Mirrors.'

Tesla's connectivity icon is now always displayed in the status bar to give you instant access to the vehicle's signal strength.

Prior to this update, the cellular connection icon was only displayed if there was low or no coverage, or if you went into the main Controls menu.

The vehicle's turn signal icons are now easier to see at a glance. Instead of the arrow being inside of a circle, the new turn signals are now simple arrows, which better matches other vehicles.

There is a new WiFi menu that makes it easier to connect your vehicle to WiFi. The new menu can be found under Controls > WLAN (WiFi).

The updated menu replaces the old dialog box that appeared when you tapped the WiFi icon at the top of the Controls menu.

The status icons at the top of the screen are still present to let you quickly view whether the vehicle is connected to WiFi and its signal strength.

Similar to WiFi, the Bluetooth menu is now located under Controls > Bluetooth, instead of an overlay on the screen.

To make additional room for the additional WiFi and Bluetooth options in the left column, you can now scroll the column vertically, with WiFi, Bluetooth and Upgrades being the last options.

The Bluetooth icon will also remain at the top of the screen to quickly let you know whether any Bluetooth devices are conneced.

Your vehicle alarm now also monitors whether your trailer is plugged in to the hitch.

The trailer alarm sets and turns off along with your vehicle alarm. You can disable this security feature in your vehicle settings at Towing and Hauling > Trailer Alarm.

Ultrawide band (UWB) technology is now available for Phone Key. Your vehicle and Phone Key can communicate with greater accuracy to more responsively lock, unlock, and extend Auto-Present Handles.

In the Tesla app, choose Phone Key > Upgrade and follow the instructions. After setup, keep your iPhone Settings for Nearby Interactions on for Tesla. Requires iPhone 11+ and Tesla app 4.31.0+.

If you're planning a road trip, you can choose the One-Time Charge option.

This option appears when you increase the Charge Limit above the daily driving recommendation.

Afterward your vehicle will automatically revert back to your previous daily driving Charge Limit.

To see the number of miles traveled since your last tire service, in your vehicle settings go to Service and look in the upper right corner. When you get your tires rotated, replaced, or swapped, choose Reset to zero out the counter.

Passengers in the back seat can listen on wireless Bluetooth headphones when watching shows or playing games on the rear touchscreen. The rest of the vehicle can continue to listen to other audio from the front.

Pair your headphones at App Launcher > Rear Display > Settings > Add New Device. To listen, turn on the headphones (up to two), open an app in Theater or Arcade on the rear screen, and hit play.

Wipers now have an Auto setting that detects precipitation and adjusts the wiping speed and intensity.

Turning on Autopilot features automatically sets wipers to Auto.

Navigation now includes symbols along your route to show danger zones.

To see this route information you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

High beams now adapt to reduce glare for other drivers and cyclists.

By detecting other road users, and selectively dimming individual pixels of the headlight, your high beams stay on more often for greater visibility at night.

To turn them on, in your vehicle settings go to Lights > Adaptive High Beams.

Editor's note: This applies to vehicles with matrix headlights seen on some of the redesigned Model S and Model X vehicles, as well as the first-gen Model 3 and Model Y. It currently only applies to vehicles in Europe, but Tesla is working on adding support in the U.S.

Navigation now includes symbols along your route to show speed cameras.

To see this route information, you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

This update includes important security fixes and improvements.

The nozzle that sprays your windshield when the left stalk or steering wheel button (model dependent) is held down previously only sprayed the windshield when the wipers were in the lower position.

With this update, the nozzle will spray the windshield any time the button is held for a brief period, regardless of the wiper's position.

The Fold Mirrors button under Controls has been updated to have multiple states. The mirror now has four states:

Fold Mirrors: This button will fold your mirrors and then briefly change to 'Save Location.'

Save Location: If your mirrors were recently folded, then you'll be presented with a Save Location button that will cause the vehicle to always fold its mirrors when it arrives near this location.

Remove Location: If your mirrors are set to be folded at the current location, the button will change to 'Remove Location," letting you remove the automatic folding of the mirrors at this location.

Unfold Mirrors: If your mirrors are currently folded, but not set to fold automatically based on the location, then the button will simply display 'Unfold Mirrors.'

Tesla's connectivity icon is now always displayed in the status bar to give you instant access to the vehicle's signal strength.

Prior to this update, the cellular connection icon was only displayed if there was low or no coverage, or if you went into the main Controls menu.

The vehicle's turn signal icons are now easier to see at a glance. Instead of the arrow being inside of a circle, the new turn signals are now simple arrows, which better matches other vehicles.

There is a new WiFi menu that makes it easier to connect your vehicle to WiFi. The new menu can be found under Controls > WLAN (WiFi).

The updated menu replaces the old dialog box that appeared when you tapped the WiFi icon at the top of the Controls menu.

The status icons at the top of the screen are still present to let you quickly view whether the vehicle is connected to WiFi and its signal strength.

Similar to WiFi, the Bluetooth menu is now located under Controls > Bluetooth, instead of an overlay on the screen.

To make additional room for the additional WiFi and Bluetooth options in the left column, you can now scroll the column vertically, with WiFi, Bluetooth and Upgrades being the last options.

The Bluetooth icon will also remain at the top of the screen to quickly let you know whether any Bluetooth devices are conneced.