现在，中国境内的Tesla车主可使用QQ音乐功能。在“媒体”菜单中选择“QQ音乐”，使用手机中的微信或QQ扫描二维码，便可查找喜爱的歌手，收听喜爱的电台和歌曲。

“自动辅助导航驾驶”可发出智能变道提醒，还能在行进缓慢的情况下作出相应调整，让旅程更顺畅。

如需启动“自动辅助导航驾驶”，请前往“控制”>“Autopilot 自动辅助驾驶”，并先启用“自动辅助转向”。对于可以使用该功能的行驶路线，按下导航指引列表的“自动辅助导航驾驶”按钮，即可选择启用或禁用此项功能。将“启动车辆即启用”设置为“是”，还能够在每次启程后直接启用自动辅助导航驾驶（在此功能可用的情况下）。

在行驶路线中启用后，朝向自己快速拉动两次巡航杆，即可在控制进入的路段使用“自动辅助导航驾驶”。使用期间，单条蓝线代表前方行进路线，便于车辆保持在行驶车道内。出现的灰线表示行驶路线中即将出现的变换车道，或建议应变换的车道，以便获得更为顺畅的行进速度。使用期间，“自动辅助导航驾驶”还可基于目的地，指引车辆转入正确的高速公路交叉口和出口。

在行驶路线中启用后，向下快速拉动两次变速杆，即可在控制进入的路段使用“自动辅助导航驾驶”。使用期间，单条蓝线代表前方行进路线，便于车辆保持在行驶车道内。出现的灰线表示行驶路线中即将出现的变换车道，或建议应变换的车道，以便获得更为顺畅的行进速度。使用期间，“自动辅助导航驾驶”还可基于目的地，指引车辆转入正确的高速公路交叉口和出口。

如需调整“自动辅助导航驾驶”变换车道的频率，以便保持车辆以设置速度行进，请前往“控制”>“Autopilot 自动辅助驾驶”>“自定义自动辅助导航驾驶”，更改“根据速度变道”设置。

自动辅助导航驾驶可自动变道，无需驾驶员对变道建议进行确认。如需关闭变道确认，请转至“控制 > Autopilot 自动辅助驾驶 > 自定义自动辅助导航驾驶 %gt; 要求变道确认”，并将其设置为“否”。关闭变道确认后，可调整“变道提醒”，选择所需通知方式。关闭确认要求后，车辆必须先确认驾驶员的双手在方向盘上，才会进行变道。关闭变道确认后，驾驶员仍有责任将双手放在方向盘上，并全程保持警觉，注意观察车辆周围情况。

注意：启用该功能前，请务必校准摄像头，并通过 WiFi 下载最新版导航地图。

现可选择第一时间接收符合您的车辆配置及所在区域的软件更新。点击“控制 > 软件 > 软件更新偏好 > 高级”。

Beach Buggy Racing 2：Tesla主题版是一款让人眼前一亮的赛车类游戏，贴近真实生活场景。车主可以驾驶自己的车驰骋于游戏中。埃及金字塔、恶龙盘踞的城堡、海盗船残骸和外星人的生物实验室，纷纷精彩亮相。 借助各种趣味十足、稀奇古怪的道具击败你的对手。新增多名车手形象，包括SpaceX星侠！

与所有游戏相同，点击触摸屏正上方的Tesla“T”，然后点击复活节彩蛋篮中的Tesla游戏厅图标，在下拉菜单中选择想要玩的游戏，即可开启欢乐时光。

经过更新，应用程序启动器现收录“玩具箱”功能，能够访问复活节彩蛋和游戏厅中的游戏。和往常一样，车辆必须挂入驻车挡，才能启动游戏厅。

借助召唤功能，可通过Tesla手机应用程序在车外将车辆驶入或移出停车位。凭借超声传感器的数据，召唤功能可操控车辆向前驶入或倒入停车位。在开始使用召唤功能前，请在触摸屏上启用该功能。点击“控制 > Autopilot自动辅助驾驶 > 召唤功能(Beta)”。然后点击“自定义召唤功能“，指定召唤功能在泊车或取回车辆时如何工作。有关此功能的更多详细信息，请参阅《车主手册》。

优化了用于调节显示亮度的自动设置，可更好地适应环境光照（尤其是在夜间模式下）。可在“快速控制”中启用此设置，也可通过点击“控制”>“显示”>“亮度”>“自动”启用。请注意，即使选择了自动设 置，您仍可以根据个人偏好进一步调节显示亮度，方法是手动拖动“显示亮度”滑块。

现在，您的车辆会显示条件限速，例如取决于日间时间、天气情况等条件的限速。如果针对您当前所在的道路存在条件限速，它将以灰色显示在常规限速标志下方。

注意：该功能要求最新版地图数据。请连接WiFi下载最新版地图数据。

现在，启用爱犬模式后，如果车载电量达到或低于20%，那么此后每隔30分钟，您的手机就会收到一则推送通知警报。期间，车载温度控制系统和显示屏会在短时间内继续运转。

注意：请留意当地法律有关将宠物单独留在车内的要求。

现在，无论锁车、解锁或误锁（如车门未关紧），Model X均可发出相应的确认提示音。如欲启用该项功能，请点击“控制 > 车辆 > 锁定提示音”。

现在，第三方充电站的功率可达200kW。

Your vehicle alarm now also monitors whether your trailer is plugged in to the hitch.

The trailer alarm sets and turns off along with your vehicle alarm. You can disable this security feature in your vehicle settings at Towing and Hauling > Trailer Alarm.

Ultrawide band (UWB) technology is now available for Phone Key. Your vehicle and Phone Key can communicate with greater accuracy to more responsively lock, unlock, and extend Auto-Present Handles.

In the Tesla app, choose Phone Key > Upgrade and follow the instructions. After setup, keep your iPhone Settings for Nearby Interactions on for Tesla. Requires iPhone 11+ and Tesla app 4.31.0+.

If you're planning a road trip, you can choose the One-Time Charge option.

This option appears when you increase the Charge Limit above the daily driving recommendation.

Afterward your vehicle will automatically revert back to your previous daily driving Charge Limit.

To see the number of miles traveled since your last tire service, in your vehicle settings go to Service and look in the upper right corner. When you get your tires rotated, replaced, or swapped, choose Reset to zero out the counter.

Passengers in the back seat can listen on wireless Bluetooth headphones when watching shows or playing games on the rear touchscreen. The rest of the vehicle can continue to listen to other audio from the front.

Pair your headphones at App Launcher > Rear Display > Settings > Add New Device. To listen, turn on the headphones (up to two), open an app in Theater or Arcade on the rear screen, and hit play.

Wipers now have an Auto setting that detects precipitation and adjusts the wiping speed and intensity.

Turning on Autopilot features automatically sets wipers to Auto.

Navigation now includes symbols along your route to show danger zones.

To see this route information you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

High beams now adapt to reduce glare for other drivers and cyclists.

By detecting other road users, and selectively dimming individual pixels of the headlight, your high beams stay on more often for greater visibility at night.

To turn them on, in your vehicle settings go to Lights > Adaptive High Beams.

Editor's note: This applies to vehicles with matrix headlights seen on some of the redesigned Model S and Model X vehicles, as well as the first-gen Model 3 and Model Y. It currently only applies to vehicles in Europe, but Tesla is working on adding support in the U.S.

Navigation now includes symbols along your route to show speed cameras.

To see this route information, you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

This update includes important security fixes and improvements.

The nozzle that sprays your windshield when the left stalk or steering wheel button (model dependent) is held down previously only sprayed the windshield when the wipers were in the lower position.

With this update, the nozzle will spray the windshield any time the button is held for a brief period, regardless of the wiper's position.

The Fold Mirrors button under Controls has been updated to have multiple states. The mirror now has four states:

Fold Mirrors: This button will fold your mirrors and then briefly change to 'Save Location.'

Save Location: If your mirrors were recently folded, then you'll be presented with a Save Location button that will cause the vehicle to always fold its mirrors when it arrives near this location.

Remove Location: If your mirrors are set to be folded at the current location, the button will change to 'Remove Location," letting you remove the automatic folding of the mirrors at this location.

Unfold Mirrors: If your mirrors are currently folded, but not set to fold automatically based on the location, then the button will simply display 'Unfold Mirrors.'

Tesla's connectivity icon is now always displayed in the status bar to give you instant access to the vehicle's signal strength.

Prior to this update, the cellular connection icon was only displayed if there was low or no coverage, or if you went into the main Controls menu.

The vehicle's turn signal icons are now easier to see at a glance. Instead of the arrow being inside of a circle, the new turn signals are now simple arrows, which better matches other vehicles.

There is a new WiFi menu that makes it easier to connect your vehicle to WiFi. The new menu can be found under Controls > WLAN (WiFi).

The updated menu replaces the old dialog box that appeared when you tapped the WiFi icon at the top of the Controls menu.

The status icons at the top of the screen are still present to let you quickly view whether the vehicle is connected to WiFi and its signal strength.

Similar to WiFi, the Bluetooth menu is now located under Controls > Bluetooth, instead of an overlay on the screen.

To make additional room for the additional WiFi and Bluetooth options in the left column, you can now scroll the column vertically, with WiFi, Bluetooth and Upgrades being the last options.

The Bluetooth icon will also remain at the top of the screen to quickly let you know whether any Bluetooth devices are conneced.

Your vehicle alarm now also monitors whether your trailer is plugged in to the hitch.

The trailer alarm sets and turns off along with your vehicle alarm. You can disable this security feature in your vehicle settings at Towing and Hauling > Trailer Alarm.

Ultrawide band (UWB) technology is now available for Phone Key. Your vehicle and Phone Key can communicate with greater accuracy to more responsively lock, unlock, and extend Auto-Present Handles.

In the Tesla app, choose Phone Key > Upgrade and follow the instructions. After setup, keep your iPhone Settings for Nearby Interactions on for Tesla. Requires iPhone 11+ and Tesla app 4.31.0+.

If you're planning a road trip, you can choose the One-Time Charge option.

This option appears when you increase the Charge Limit above the daily driving recommendation.

Afterward your vehicle will automatically revert back to your previous daily driving Charge Limit.

To see the number of miles traveled since your last tire service, in your vehicle settings go to Service and look in the upper right corner. When you get your tires rotated, replaced, or swapped, choose Reset to zero out the counter.

Passengers in the back seat can listen on wireless Bluetooth headphones when watching shows or playing games on the rear touchscreen. The rest of the vehicle can continue to listen to other audio from the front.

Pair your headphones at App Launcher > Rear Display > Settings > Add New Device. To listen, turn on the headphones (up to two), open an app in Theater or Arcade on the rear screen, and hit play.

Wipers now have an Auto setting that detects precipitation and adjusts the wiping speed and intensity.

Turning on Autopilot features automatically sets wipers to Auto.

Navigation now includes symbols along your route to show danger zones.

To see this route information you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

High beams now adapt to reduce glare for other drivers and cyclists.

By detecting other road users, and selectively dimming individual pixels of the headlight, your high beams stay on more often for greater visibility at night.

To turn them on, in your vehicle settings go to Lights > Adaptive High Beams.

Editor's note: This applies to vehicles with matrix headlights seen on some of the redesigned Model S and Model X vehicles, as well as the first-gen Model 3 and Model Y. It currently only applies to vehicles in Europe, but Tesla is working on adding support in the U.S.

Navigation now includes symbols along your route to show speed cameras.

To see this route information, you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

This update includes important security fixes and improvements.

The nozzle that sprays your windshield when the left stalk or steering wheel button (model dependent) is held down previously only sprayed the windshield when the wipers were in the lower position.

With this update, the nozzle will spray the windshield any time the button is held for a brief period, regardless of the wiper's position.

The Fold Mirrors button under Controls has been updated to have multiple states. The mirror now has four states:

Fold Mirrors: This button will fold your mirrors and then briefly change to 'Save Location.'

Save Location: If your mirrors were recently folded, then you'll be presented with a Save Location button that will cause the vehicle to always fold its mirrors when it arrives near this location.

Remove Location: If your mirrors are set to be folded at the current location, the button will change to 'Remove Location," letting you remove the automatic folding of the mirrors at this location.

Unfold Mirrors: If your mirrors are currently folded, but not set to fold automatically based on the location, then the button will simply display 'Unfold Mirrors.'

Tesla's connectivity icon is now always displayed in the status bar to give you instant access to the vehicle's signal strength.

Prior to this update, the cellular connection icon was only displayed if there was low or no coverage, or if you went into the main Controls menu.

The vehicle's turn signal icons are now easier to see at a glance. Instead of the arrow being inside of a circle, the new turn signals are now simple arrows, which better matches other vehicles.

There is a new WiFi menu that makes it easier to connect your vehicle to WiFi. The new menu can be found under Controls > WLAN (WiFi).

The updated menu replaces the old dialog box that appeared when you tapped the WiFi icon at the top of the Controls menu.

The status icons at the top of the screen are still present to let you quickly view whether the vehicle is connected to WiFi and its signal strength.

Similar to WiFi, the Bluetooth menu is now located under Controls > Bluetooth, instead of an overlay on the screen.

To make additional room for the additional WiFi and Bluetooth options in the left column, you can now scroll the column vertically, with WiFi, Bluetooth and Upgrades being the last options.

The Bluetooth icon will also remain at the top of the screen to quickly let you know whether any Bluetooth devices are conneced.