U kunt nu de snelheidsmarge van Autopilot wijzigen met Bediening > Autopilot > Marge snelheidsinstelling.

Marge snelheidsinstelling kan worden ingesteld op VAST voor alle wegen of PERCENTAGE. Deze laatste instelling is afhankelijk van de geldende snelheidslimiet.

Met Autopilot wordt de cruisecontrolsnelheid ingesteld op de geldende snelheidslimiet. Er wordt gekozen voor Marge snelheidsinstelling of de huidige rijsnelheid, afhankelijk van welke hoger is.

U kunt nu de Ingestelde Autopilot-snelheid wijzigen door Bediening > Autopilot > Acceleratie > Snelheidsinstelling op een van de volgende opties in te stellen:

Met SNELHEIDSLIMIET wordt de cruisecontrolsnelheid ingesteld op de geldende snelheidslimiet. Er wordt gekozen voor Marge snelheidsinstelling of de huidige rijsnelheid, afhankelijk van welke hoger is. De Marge snelheidsinstelling kan worden ingesteld op VAST voor alle wegen of PERCENTAGE. Deze laatste instelling is afhankelijk van de geldende snelheidslimiet.

Met HUIDIGE SNELHEID wordt de cruisecontrolsnelheid ingesteld op de snelheid waarmee u op dat moment rijdt.

Opmerking: Uw oude snelheidinstellingsmarge wordt niet gebruikt voor de nieuwe functie Snelheidsinstelling.

Spotify is bijgewerkt, zodat het nu gemakkelijker is om content uit uw bibliotheek te vinden en af te spelen. Openbare afspeellijsten en podcasts zijn nu ook opgenomen. Met Continu afspelen kunt u van uw afspeellijsten genieten zonder pauze tussen de nummers. Op het nieuwe Spotify-startscherm kunt u zoeken naar nieuwe content op basis van uw persoonlijke voorkeuren. Spotify wordt ook gesynchroniseerd met andere ingelogde apparaten, zodat u met de mobiele Spotify-app kunt bepalen wat er in de auto wordt afgespeeld.

De resultaten van Naar media zoeken zijn nu duidelijker ingedeeld. De resultaten worden nu ook ingedeeld volgens mediabron, wat het gemakkelijker maakt om bij de huidig gekozen bron te blijven.

Ook de spraakherkenning is verbeterd.

U kunt nu uw favoriete mediabronnen in de Media Player weergeven of verbergen. Ga naar Media Player-instellingen > Bronnen om de bronnen die u niet gebruikt te verbergen. Verborgen mediabronnen worden ook niet opgenomen in de zoekresultaten.

In Launch Mode wordt de motor zo afgestemd dat er maximaal vermogen wordt geleverd bij acceleratie.

Om Launch Mode te starten, schakelt u eerst Insane+ acceleratie in door te tikken op Bediening > Rijden > Acceleratie > Insane+ en volgt u de instructies die worden weergegeven wanneer u op de link "Gebruik van Launch Mode" tikt.

Om Launch Mode te starten, schakelt u eerst Ludicrous+ acceleratie in door te tikken op Bediening > Rijden > Acceleratie > Ludicrous+ en volgt u de instructies die worden weergegeven wanneer u op de link "Gebruik van Launch Mode" tikt.

Via Bediening > Scherm > Spraakherkenning kunt u nu voor spraakbedieningsopdrachten een andere taal instellen dan voor het touchscreen.

Please check back shortly. If you have received 2020.44.10, you can share release notes with us below.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.

You can now choose Hebrew as your touchscreen language.

To change the language, shift into Park, and go to Controls > Display > Touchscreen Language.

- Improved short-deadline lane changes, to avoid going off-route, through better modeling of target lane vehicles to improve gap selection assertiveness.

- Improved offset consistency when controlling for static obstacles. Also improved smoothness when changing offset direction by adjusting speed more comfortably.

- Improved handling of oncoming cars on narrow unmarked roads by improving prediction of oncoming car's trajectory and leaving enough room for them to pass before re-centering.

- Improved Occupancy Flow prediction from the Occupancy Network for arbitrary moving obstacles by 8%.

- Expanded usage of the new object ground truth autolabeler for the NonVRU detection model, improving distant vehicle recall and geometry precision for semi-trucks, trailers, and exotic vehicles.

- Improved VRU control by expanding planning scope to control gently for low-confidence detections that may interfere with ego's path.

- Improved handling for VRUs near crosswalks by predicting their future intent more accurately. This was done by leveraging more kinematic data to improve association between crosswalks and VRUs.

- Improved ego's behavior near VRUs by tuning their assumed kinematic properties and utilizing available semantic information to classify more accurately their probability of intersecting ego's path.

- Improved Automatic Emergency Braking recall in response to cut-in vehicles and vehicles behind ego while reversing.

Autopilot visualizations (non-FSD) now include some features that were previously only available on FSD Beta.

Improvements include dynamic vehicle sizing and open door visualizations. The vehicle will now determine the width, height and length of each vehicle in its surroundings and size the 3D model appropriately in the visualization. Open doors will also be displayed in gray or orange, depending on whether they're in the vehicle's path.

The reverse camera view has been improved by cropping parts of the video to minimize distractions. The top portion of the video feed no longer shows the vehicle trunk and the bumper is now hardly visible along the bottom of the reverse camera.

Service Mode specific release notes have been added with this update. When entering Service Mode, you can now tap on 'Release Notes' near the top of the screen to view any improvements to Service Mode in this vehicle update.

Each new feature is listed with a description and which vehicles it applies to. You can also tap the Service Mode section name in blue to jump directly to that area in Service Mode.

Video post-processing has been improved by providing white and color balance to the vehicle's camera feeds.

This results in more natural-looking videos when using the vehicle's cameras on screen and when utilizing Sentry Mode or the Dashcam.

The clarity of the videos is also notably improved in this update, resulting in clearer video when using the vehicle's reverse or repeater cameras.

Tesla's Service Mode now lets you view the status of the vehicle's Electronic Control Unit (ECU). Under Infotainment > ECU Update Status, you can now view the status of a variety of sensors and vehicle sub-systems.

Service Mode is a special vehicle mode that's typically reserved for service technicians, although it can be accessed by anyone. It is used to view information and test various aspects of a vehicle.

Tesla has updated the volume indicator on the instrument cluster to be vertical instead of horizontal.