Trafiklys- og stopskiltkontrol er beregnet til at registrere og reagere på trafiklys og stopskilte og sætte bilens hastighed ned for at stoppe, når du bruger den adaptive fartpilot eller autostyring. Denne funktion sætter bilens hastighed ned ved alle registrerede trafiklys, også grønt lys, blinkende lys og slukkede lys. Når bilen nærmer sig et kryds, angiver den intentionen om at sætte hastigheden ned i form af en meddelelse, sætter farten ned og stopper ved den røde linje i kørevisualiseringen.

For at fortsætte over stoplinjen skal du trække i autopilotarmen en enkelt gang eller træde kortvarigt på speederen for at bekræfte, at det er sikkert at fortsætte. Som det er tilfældet ved alle autopilotfunktioner, skal du hele tiden være opmærksom, klar til at skride til handling øjeblikkeligt og evt. bremse, da denne funktion muligvis ikke stopper for alle trafiksignaler. Denne funktion er forsigtig, sætter ofte farten ned i starten og forsøger ikke at dreje i kryds. Efterhånden som vi lærer af flåden, kommer denne funktion til at fungere mere naturligt.

For at fortsætte over stoplinjen skal du skubbe gearstangen ned en enkelt gang eller træde kortvarigt på speederen for at bekræfte, at det er sikkert at fortsætte. Som det er tilfældet ved alle autopilotfunktioner, skal du hele tiden være opmærksom, klar til at skride til handling øjeblikkeligt og evt. bremse, da denne funktion muligvis ikke stopper for alle trafiksignaler. Denne funktion er forsigtig, sætter ofte farten ned i starten og forsøger ikke at dreje i kryds. Efterhånden som vi lærer af flåden, kommer denne funktion til at fungere mere naturligt.

Du aktiverer ved at sætte bil

Funktionen Trafiklys- og stopskiltkontrol kræver ikke længere, at føreren udtrykkeligt bekræfter ved at trække i autopilotarmen for at fortsætte ved grønt lys, når der er et køretøj foran. Stoplinjen i kørevisualiseringen bliver nu grøn som angivelse af, at bilen fortsætter gennem et vejkryds.

Du skal stadig være opmærksom og være klar til straks at skride til handling og evt. bremse, da denne funktion muligvis ikke stopper for alle trafiksignaler. Denne funktion forsøger ikke at dreje i vejkryds, men efterhånden som vi lærer af flåden, kommer denne funktion til at fungere mere naturligt.

Når Naviger på autopilot er aktiveret, kan din bil blive liggende i overhalingsbanen. Dette er en påmindelse om at forblive i en langsommere vognbane, når du ikke passerer andre køretøjer. Juster din overhalingsbaneindstilling ved at trykke på Betjeningselementer > Autopilot > TILPAS NAVIGER PÅ AUTOPILOT > FORLAD OVERHALINGSBANE.

Din bil kan advare dig i visse situationer, hvis den registrerer, at du nærmer dig et stopskilt eller rødt lys, mens automatisk styring er aktiveret. Advarslen fritager ikke føreren fra sit ansvar for at være opmærksom og standser heller ikke bilen.

Der høres en lyd, når det trafiklys, du venter ved, bliver grønt. Hvis du venter bag et andet køretøj, høres lyden, når dette køretøj kører frem, medmindre adaptiv fartpilot eller automatisk styring er aktiv. Når Trafiklys- og stopskiltkontrol er aktiveret, høres en lyd, når du kan bekræfte fortsættelse gennem et grønt trafiklys. For at aktivere skal du trykke på Betjeningselementer > Autopilot > Lyd for grønt trafiklys.

Bemærk: Lyden er kun designet som en meddelelse. Det er førerens ansvar at holde øje med omgivelserne og træffe beslutninger på baggrund heraf.

Kørevisualiseringen kan nu vise yderligere genstande som f.eks. rødt lys og visse vejmarkeringer. Visualisering af rødt lys er ikke en erstatning for en opmærksom fører og stopper ikke bilen. Tryk på Betjeningselementer > Autopilot > Full Self-Driving Visualization Preview for at se disse yderligere genstande.

Din bil kan advare dig i visse situationer, hvis den registrerer, at du nærmer dig et stopskilt eller rødt lys, mens automatisk styring er aktiveret. Advarslen fritager ikke føreren fra sit ansvar for at være opmærksom og standser heller ikke bilen.

Hastighedsassistenten bruger nu din bils kameraer til at registrere hastighedstavler og forbedre nøjagtigheden af oplysningerne om hastighedsgrænser på lokale veje.

Hastighedsassistenten bruger nu din bils kameraer til at registrere hastighedstavler og forbedre nøjagtigheden af oplysningerne om hastighedsgrænser på lokale veje. De hastighedstavler, der registreres, vises i kørevisualiseringen, og bruges til at indstille den tilknyttede advarsel om hastighedsgrænse.

For at indstille hastighedsassistenten skal du som altid trykke på Betjeningselementer > Autopilot > Fartgrænse.

Visualisering i realtid viser, hvordan affjedringssystemet dynamisk justerer hvert hjuls dæmpning for at tage højde for skiftende vejforhold. Dette kan nu vises på enten højre eller venstre side af instrumentpanelet. For at få vist visualiseringen skal du trykke kortvarigt på den relevante rulleknap på rattet, indtil de tilgængelige valgmuligheder vises på instrumentpanelet. Rul med rulleknappen for at vælge Affjedring.

Indstil hastigheden for adaptiv fartpilot eller automatisk styring hurtigt til den aktuelle hastighed ved at trykke på speedometeret i gruppen. Du kan stadig trykke på hastighedstavlen for at indstille hastigheden til den aktuelle hastighedsgrænse.

Lyden for fodgængeradvarsel er blevet opdateret pga. lovkrav.

Your vehicle alarm now also monitors whether your trailer is plugged in to the hitch.

The trailer alarm sets and turns off along with your vehicle alarm. You can disable this security feature in your vehicle settings at Towing and Hauling > Trailer Alarm.

Ultrawide band (UWB) technology is now available for Phone Key. Your vehicle and Phone Key can communicate with greater accuracy to more responsively lock, unlock, and extend Auto-Present Handles.

In the Tesla app, choose Phone Key > Upgrade and follow the instructions. After setup, keep your iPhone Settings for Nearby Interactions on for Tesla. Requires iPhone 11+ and Tesla app 4.31.0+.

If you're planning a road trip, you can choose the One-Time Charge option.

This option appears when you increase the Charge Limit above the daily driving recommendation.

Afterward your vehicle will automatically revert back to your previous daily driving Charge Limit.

To see the number of miles traveled since your last tire service, in your vehicle settings go to Service and look in the upper right corner. When you get your tires rotated, replaced, or swapped, choose Reset to zero out the counter.

Passengers in the back seat can listen on wireless Bluetooth headphones when watching shows or playing games on the rear touchscreen. The rest of the vehicle can continue to listen to other audio from the front.

Pair your headphones at App Launcher > Rear Display > Settings > Add New Device. To listen, turn on the headphones (up to two), open an app in Theater or Arcade on the rear screen, and hit play.

Wipers now have an Auto setting that detects precipitation and adjusts the wiping speed and intensity.

Turning on Autopilot features automatically sets wipers to Auto.

Navigation now includes symbols along your route to show danger zones.

To see this route information you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

High beams now adapt to reduce glare for other drivers and cyclists.

By detecting other road users, and selectively dimming individual pixels of the headlight, your high beams stay on more often for greater visibility at night.

To turn them on, in your vehicle settings go to Lights > Adaptive High Beams.

Editor's note: This applies to vehicles with matrix headlights seen on some of the redesigned Model S and Model X vehicles, as well as the first-gen Model 3 and Model Y. It currently only applies to vehicles in Europe, but Tesla is working on adding support in the U.S.

Navigation now includes symbols along your route to show speed cameras.

To see this route information, you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

This update includes important security fixes and improvements.

The nozzle that sprays your windshield when the left stalk or steering wheel button (model dependent) is held down previously only sprayed the windshield when the wipers were in the lower position.

With this update, the nozzle will spray the windshield any time the button is held for a brief period, regardless of the wiper's position.

The Fold Mirrors button under Controls has been updated to have multiple states. The mirror now has four states:

Fold Mirrors: This button will fold your mirrors and then briefly change to 'Save Location.'

Save Location: If your mirrors were recently folded, then you'll be presented with a Save Location button that will cause the vehicle to always fold its mirrors when it arrives near this location.

Remove Location: If your mirrors are set to be folded at the current location, the button will change to 'Remove Location," letting you remove the automatic folding of the mirrors at this location.

Unfold Mirrors: If your mirrors are currently folded, but not set to fold automatically based on the location, then the button will simply display 'Unfold Mirrors.'

Tesla's connectivity icon is now always displayed in the status bar to give you instant access to the vehicle's signal strength.

Prior to this update, the cellular connection icon was only displayed if there was low or no coverage, or if you went into the main Controls menu.

The vehicle's turn signal icons are now easier to see at a glance. Instead of the arrow being inside of a circle, the new turn signals are now simple arrows, which better matches other vehicles.

There is a new WiFi menu that makes it easier to connect your vehicle to WiFi. The new menu can be found under Controls > WLAN (WiFi).

The updated menu replaces the old dialog box that appeared when you tapped the WiFi icon at the top of the Controls menu.

The status icons at the top of the screen are still present to let you quickly view whether the vehicle is connected to WiFi and its signal strength.

Similar to WiFi, the Bluetooth menu is now located under Controls > Bluetooth, instead of an overlay on the screen.

To make additional room for the additional WiFi and Bluetooth options in the left column, you can now scroll the column vertically, with WiFi, Bluetooth and Upgrades being the last options.

The Bluetooth icon will also remain at the top of the screen to quickly let you know whether any Bluetooth devices are conneced.

Your vehicle alarm now also monitors whether your trailer is plugged in to the hitch.

The trailer alarm sets and turns off along with your vehicle alarm. You can disable this security feature in your vehicle settings at Towing and Hauling > Trailer Alarm.

Ultrawide band (UWB) technology is now available for Phone Key. Your vehicle and Phone Key can communicate with greater accuracy to more responsively lock, unlock, and extend Auto-Present Handles.

In the Tesla app, choose Phone Key > Upgrade and follow the instructions. After setup, keep your iPhone Settings for Nearby Interactions on for Tesla. Requires iPhone 11+ and Tesla app 4.31.0+.

If you're planning a road trip, you can choose the One-Time Charge option.

This option appears when you increase the Charge Limit above the daily driving recommendation.

Afterward your vehicle will automatically revert back to your previous daily driving Charge Limit.

To see the number of miles traveled since your last tire service, in your vehicle settings go to Service and look in the upper right corner. When you get your tires rotated, replaced, or swapped, choose Reset to zero out the counter.

Passengers in the back seat can listen on wireless Bluetooth headphones when watching shows or playing games on the rear touchscreen. The rest of the vehicle can continue to listen to other audio from the front.

Pair your headphones at App Launcher > Rear Display > Settings > Add New Device. To listen, turn on the headphones (up to two), open an app in Theater or Arcade on the rear screen, and hit play.

Wipers now have an Auto setting that detects precipitation and adjusts the wiping speed and intensity.

Turning on Autopilot features automatically sets wipers to Auto.

Navigation now includes symbols along your route to show danger zones.

To see this route information you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

High beams now adapt to reduce glare for other drivers and cyclists.

By detecting other road users, and selectively dimming individual pixels of the headlight, your high beams stay on more often for greater visibility at night.

To turn them on, in your vehicle settings go to Lights > Adaptive High Beams.

Editor's note: This applies to vehicles with matrix headlights seen on some of the redesigned Model S and Model X vehicles, as well as the first-gen Model 3 and Model Y. It currently only applies to vehicles in Europe, but Tesla is working on adding support in the U.S.

Navigation now includes symbols along your route to show speed cameras.

To see this route information, you must have Navigation > Online Routing turned on. Requires Premium Connectivity.

This update includes important security fixes and improvements.

The nozzle that sprays your windshield when the left stalk or steering wheel button (model dependent) is held down previously only sprayed the windshield when the wipers were in the lower position.

With this update, the nozzle will spray the windshield any time the button is held for a brief period, regardless of the wiper's position.

The Fold Mirrors button under Controls has been updated to have multiple states. The mirror now has four states:

Fold Mirrors: This button will fold your mirrors and then briefly change to 'Save Location.'

Save Location: If your mirrors were recently folded, then you'll be presented with a Save Location button that will cause the vehicle to always fold its mirrors when it arrives near this location.

Remove Location: If your mirrors are set to be folded at the current location, the button will change to 'Remove Location," letting you remove the automatic folding of the mirrors at this location.

Unfold Mirrors: If your mirrors are currently folded, but not set to fold automatically based on the location, then the button will simply display 'Unfold Mirrors.'

Tesla's connectivity icon is now always displayed in the status bar to give you instant access to the vehicle's signal strength.

Prior to this update, the cellular connection icon was only displayed if there was low or no coverage, or if you went into the main Controls menu.

The vehicle's turn signal icons are now easier to see at a glance. Instead of the arrow being inside of a circle, the new turn signals are now simple arrows, which better matches other vehicles.

There is a new WiFi menu that makes it easier to connect your vehicle to WiFi. The new menu can be found under Controls > WLAN (WiFi).

The updated menu replaces the old dialog box that appeared when you tapped the WiFi icon at the top of the Controls menu.

The status icons at the top of the screen are still present to let you quickly view whether the vehicle is connected to WiFi and its signal strength.

Similar to WiFi, the Bluetooth menu is now located under Controls > Bluetooth, instead of an overlay on the screen.

To make additional room for the additional WiFi and Bluetooth options in the left column, you can now scroll the column vertically, with WiFi, Bluetooth and Upgrades being the last options.

The Bluetooth icon will also remain at the top of the screen to quickly let you know whether any Bluetooth devices are conneced.